search for: tulip

Hello, I''m running xen-3.0.2-3 and try to share the 4 ports of a adaptec 4port ethernet card between dom0 and domU by using pciback.hide. Therefor I had to modify the domU driver for the tulip cards due to the fact that there is only one eeprom on the board and all 4 ports of the card are using the same interrupt line. When starting the dom0 tulip driver (unmodified) I get two working eth-interfaces, after starting the domU tulip driver (modified) I got two eth-interfaces inside of the g...

Steve Frampton [mailto:frampton@j-com.co.jp] of your address change Content-Length: 7142 samba@samba.org David Barroso <h4371719@alumnes.eup.udl.es> Jeremy Allison <jeremy@valinux.com> "Tulipant Gergely" <tulipant-gergely@dbrt.hu> Edwards Philip M Contr AFRL/SNRR <Philip.Edwards@wpafb.af.mil> Drenning Bruce <bdrenni@catholicrelief.org> Glenn Valenta <glenn@coloradostudios.com> "Grosen, Mark" <Mark.Grosen@Dialogic.com> "Deborah...

...command. :(){:|:};: Zsh chewed up everything on the machine... I ran it knowing I'd probably have to reboot. But, I hardly expected it to panic. Or, was that normal? Anyway, the following is some detail... Please mail me if there is more I'm ment to do. Thanks in advance :) ultraviolet@tulip:~ %> uname -a FreeBSD tulip.epweb.co.za 4.8-STABLE FreeBSD 4.8-STABLE #0: Wed Jun 11 10:09:55 SAST 2003 root@tulip.epweb.co.za:/usr/src/sys/compile/TULIP i386 Panic message: IdlePTD at phsyical address 0x0042a000 initial pcb at physical address 0x0036e460 panicstr: vm_map_entry_create: ker...

...eth0: VIA Rhine eth1: IntelPro 100 (originally comes up as eth0 but gets renamed eth1) eth3: SMC1255TX (originally comes up as eth1 but gets renamed eth3) Here's my issue: In udev rules (/etc/udev/rules.d/70-persistent-net.rules I see: # PCI device 0x1113:0x1216 (tulip) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:4c:68:6e:ff:ff", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x8086:0x1229 (e100) SUBSYSTEM=="net", ACTION=="a...

...all it on my freebsd system; however, I have run into 'permission problems' during execution. I do the standard .configure, make, make check, make install and install into the default location of /usr/local/... but when a normal user attempts to run 'R' I get the following: --- [tulip ~]% R R : Copyright 2001, The R Development Core Team Version 1.2.3 (2001-04-26) R is free software and comes with ABSOLUTELY NO WARRANTY. You are welcome to redistribute it under certain conditions. Type `license()' or `licence()' for distribution details. R is a collaborative project...

...internal inums rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions. See the GNU General Public Licence for details. The command and results: root@rocket sbh # /usr/bin/rsync -av --progress --one-file-system --stats root@tulip:/home/trish/ root@shapeshifter:/mnt/aux/tulip Warning: No xauth data; using fake authentication data for X11 forwarding. receiving file list ... 17330 files to consider mkdir "/home/sbh/root@shapeshifter:/mnt/aux/tulip" failed: No such file or directory rsync error: error in file IO (cod...

On Thu, 10 Aug 2006 23:59:56 +0200 "Peter M" <peter.mdk@gmail.com> wrote: > The analyzer is a AMD Duron around 1200 MHz and has 128 MB of RAM. Your trying to squeeze blood from a turnip (not tulip) by trying to run 8 interfaces at once on that system. > I can't remember if the crashes only comes when I'm running tcpdumps > on several bridges at a time. But shouldn't the kernel handle it more > gracefully if it uses up all the memory? > > analyze-this:~# free >...

I just cranked up Samba 2.0.6 on NetBSD-sun3 1.4. The clients are Windows 98 (non-SE). I have had experience with earlier versions of Samba, so I was able to get 2.0.6 up and running without great difficulty. I exported a directory and was able to mount it on my Win98 machines fine. Using Explorer, everything looked like I expected it to: files were listed with their full names and I was able

...max xmit = 65535 deadtime = 15 strict sync = no interfaces = 192.168.33.2/24 remote announce = 192.168.33.255 The box is a PIII 500Mhz, software RAID5 with read and write throughput of 30MB/s and 15MB/s. It has RH6.1 installed, with 2.2.13ac3 kernel. The network card uses the DECchip Tulip driver. FTP reads 9MB/s and writes 7MB/s. The tested client was W98 SR 1. This problem is perhaps not very interesting if you only use Explorer or WinCommander, because they both use block size smaller than 65488. But we use a special program with greater blocksize... :\ What causes this strange...

...rdware 2.0.3. The mount is fine, and can sit for a long time. However, as soon as I start doing ls in directories on the mount, or tab-completing filenames (i.e. short reads), I get a kernel oops. This invariably happens within 20 seconds of starting to do this. I have tried two separate NICs (one tulip-compatible card and a 3com 905B) both of which have the same problem. The machine hangs whether or not smbfs is a module (although running it as a module makes the source of the oops more obvious). I have never debugged the linux kernel before. What information do you folks need from me? I have at...

I've set up Samba and LPRng for HP printers with JetDirect cards. It works for one user at a time. But if the printer is off-line or busy, the samba client does not get an error message, but the job gets lost. :( I would like the print jobs to be spooled on Linux even when there is an active print job or when the printer is off-line. Unfortunately I'm not familiar with lpd. The

..., Live 0xc8901000 floppy 57125 0 - Live 0xc8914000 ide_cd 40033 0 - Live 0xc88f6000 cdrom 36705 1 ide_cd, Live 0xc88ec000 serio_raw 10693 0 - Live 0xc8847000 pcspkr 7105 0 - Live 0xc8811000 8139cp 26305 0 - Live 0xc88d8000 8139too 28737 0 - Live 0xc88cf000 mii 9409 2 8139cp,8139too, Live 0xc883e000 tulip 50785 0 - Live 0xc88c1000 i2c_viapro 12117 0 - Live 0xc8816000 i2c_core 23745 1 i2c_viapro, Live 0xc8829000 ext3 123081 2 - Live 0xc8860000 jbd 56553 1 ext3, Live 0xc8851000 ehci_hcd 32845 0 - Live 0xc8834000 ohci_hcd 23261 0 - Live 0xc8822000 uhci_hcd 25421 0 - Live 0xc881a000 #cat /etc/modprobe....

...ed total allocation of 510: see help(memory.size)" memory.size() 529880586 R is running under windows: sysname release "Windows" "NT 5.1" version nodename "(build 2600) Service Pack 2" "PC-TULIP" machine login "x86" "Utente-01" user "Utente-01" Can anyone help me? I need to read those data! Thanks in advance. Regards. Vito Ricci Se non ora, quando? Se non qui, dove? Se non tu, chi?

Hi, Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? Whether the interface may be eth0/eth1/ppp0 or some other. Is there any related IOCTL avialable, if so just give the linux-2.4.18 file path. thanks, Srikanth. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

...e have been facing huge packet loss when we turn on traffic shaping using HTB. I upgraded to 2.4.24 kernel (without any htb patch), still there is same problem. Avg. traffic is around 2Mbps and 4Mbps at peak hours. There are around 110 HTB classes and SFQ attached to each class. We are using 4 port Tulip (only 2 ports in use) card and a 3Com 59x card. Previously I was using default quantum and r2q values for all the classes. Somewhere I saw quantum = (link in Kbit) * 1024 / ( 8 * 1500) so I tried by increasing the qntm. value of the main class (and other classes with rate above 512K) still there...

Hi, I am looking for dual or quad fast ethernet NICs that work with CentOS. There is no need for high performance so regular fast/pci is ok. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20101228/1f5e2944/attachment-0001.html>

...00-7803 : PCI device 1095:3112 (CMD Technology Inc) 8000-8007 : PCI device 1095:3112 (CMD Technology Inc) 8400-8403 : PCI device 1095:3112 (CMD Technology Inc) 8800-8807 : PCI device 1095:3112 (CMD Technology Inc) 9000-90ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100 9000-90ff : tulip 9400-94ff : Tiger Jet Network Inc. Model 300 128k b800-b80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE b800-b807 : ide0 b808-b80f : ide1 d000-dfff : PCI Bus #01 d800-d8ff : ATI Technologies Inc Radeon VE QY e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f...

For those of you running SuSE 9.1, I do not recommend upgrading to 9.2 at this time. Refer to http://shorewall.net/myfiles.htm for information on my configuration: a) On Ursa: 1) After the upgrade, both of the NICs were recognized as "configured" in YAST yet neither of them would start; ifup claimed that no configuration could be found for either interface. Only got them running

...http://marc.theaimsgroup.com/?l=samba&m=99555029423188&w=2 ) From: Adrian Barker <ccaaarb@ucl.ac.uk> Date: Thu, 02 Nov 2000 15:47:22 +0000 Message-Id: <20001102154742.E52FA81BB@lists.samba.org> ( http://marc.theaimsgroup.com/?l=samba&m=97474174027152&w=2 ) From: "Tulipant Gergely" <tulipant-gergely@dbrt.hu> Date: Mon, 20 Nov 2000 17:39:47 +0100 Message-ID: <3A1961E3.5709.1316996@localhost> ( http://marc.theaimsgroup.com/?l=samba&m=97474174027152&w=2 )

At the risk of angering the crash Gods, my sustem has NOT crashed again since I downgraded the kernel from 2.6.18-1.2239.fc5 to 2.6.18-1.2200.fc5. Given that newfound stability, and my lack of time, I'm going to put on hold any further diagnostics, until the next kernel revision is released. I have submitted a report at bugzilla.redhat.com (bug 218128). (Ah, nuts; accidentally created a