search for: triplit

.../nut/upsstats.cgi?host=tripplite at 127.0.0.1:3493' | sed 's:<[^>]*>::g' | awk 'BEGIN {s = 0; } $1 == "Status:" { s = 1; next; } s == 1 { print $0; s = 0; }') if [ "$x" != "ONLINE" ] then logger -p daemon.warning "Triplite is not offline, trying to restart USB" /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 0 sleep 5 /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 1 sleep 30 else sleep 300 fi done (https://github.com/codazoda/hub-ctrl.c is the little USB power switch...

Hey all, I have a triplite 1050 and when I did a test today I saw that the battery bounce from 100 to 80 to 90 to 91 percent before UPSD lost its connection to the UPS. The server then decided that it was time to shut off. The UPS sat at 91% for about 5 min before UPSD lost its connection, so I'm not sure if it wa...

Add-on: Network UPS Tools Manage battery backup (UPS) devices----------------------------------------------------------- Add-on version: 0.2.0 You are running the latest version of this add-on. System: HassOS 4.10 (armv7 / raspberrypi4) Home Assistant Core: 0.110.7 Home Assistant Supervisor: 227----------------------------------------------------------- Please, share the above information when

On 9/10/2017 6:41 PM, Sam Varshavchik wrote: > Dutchman01 writes: > >> Hello all, >> >> ? >> >> I request a new NUT release as current dates back to March 9, 2016: NUT 2.7.4 >> >> The fact stays that not all distro?s use latest snapshots/commits from github >> dev tree. >> >> ? >> >> So please do release a new up to

I lost one channel on an FXO module on a Sangoma A200 card due to a lightening zap in the area (well - it died the same night as a major thunder storm came through).... Is there a recommended/standard surge protector for phone lines I should be using? My server has 2 POTS lines. thanks Todd

...ipplite at 127.0.0.1:3493' > | sed 's:<[^>]*>::g' | awk 'BEGIN {s = 0; } $1 == "Status:" { s = 1; next; > } s == 1 { print $0; s = 0; }') > > if [ "$x" != "ONLINE" ] > then > logger -p daemon.warning "Triplite is not offline, trying to > restart USB" > /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 0 > sleep 5 > /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 1 > sleep 30 > else > sleep 300 > fi > done > > > Not sure, if this is...

...I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to = > > monitor both of them with the same Raspberry Pi using NUT. > > Rasp. Pi, x86 or amd is irrelevant as Pi runs Linux & BSD etc. > Relevant is: What OS ? > > If you connect a USB device (mem stick, triplite ups or disc whatevere) > to a FreeBSD computer (PC, rasp. i386 amd64 whatever) the > computer will show serial numbers with all of; > dmesg > vi /var/log/messages > kill -9 `cat /var/run/devd.pid` ; /sbin/devd -d PS a few rare old devs don't announce a sernum, so you may be...

...a bad firmware version or other issue covered by the warranty. I'm not suggesting switching to Linux permanently, just boot from the live CD and configure NUT on Linux so you can rule out any potential Linux-vs-FreeBSD issues. ohhh I thought you meant try using FREEBSD Live CD. As for TripLite, they "supporting" two variants. OpenSUSE and Fedora, but ollldddd versions Fedora 8 and OpenSUSE 11. Plus they provide their own software(?) It's call PowerAlert Local (PAL) * if you still want to test on FreeBSD, I'm not sure what this will definitively tell us th...

Good evening, Hoping someone can point me in the right direction.. I downloaded and installed the 2.6.5-6 Windows MSI and it installed fine, although I nee to also get a libusb0.dll. Connected USB to a Triplite, I could go to the Devices and Printers and see the USB installed. But no matter what I did I could not get nut to work. I tried various commands, and got various errors. my config has -- [myups1] driver = usbhid-ups port = auto vendorid = 09ae # cable = 1234 desc = &...

...nut/upsstats.cgi?host=tripplite at 127.0.0.1:3493' | sed  's:<[^>]*>::g' | awk 'BEGIN {s = 0; } $1 == "Status:" { s = 1; next; } s == 1 { print $0; s = 0; }')     if [ "$x" != "ONLINE" ]     then         logger -p daemon.warning "Triplite is not offline, trying to restart USB"         /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 0         sleep 5         /root/bin/hub-ctrl -b 001 -d 005 -P 1 -p 1         sleep 30     else         sleep 300     fi done Not sure, if this is still the same problem. But I have my solution;-)...

Hey all, I've read through as many relevant mailing list posts and public blog posts as I could, but I can't seem to find an answer to my issue. I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to monitor both of them with the same Raspberry Pi using NUT. The problem I have is there doesn't seem to be any way in the nut.conf to differentiate between the two UPS via

I haven't tried it on RaspberryPi, but if there's some specific Tripp Lite information I can help with, let me know. David Zomaya Tripp Lite ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Charles Lepple <clepple at gmail.com> Sent: Sunday, December 8, 2019 8:36 PM To: Layne Fowler

On 9/23/2020 1:09 PM, Stuart D. Gathman wrote: > I solved this problem a few years back. > > https://github.com/sdgathman/trippfix > > The short answer is USB is broken on the model (but the power management > is excellent, handling switchover to generator power without a hitch). > > The workaround is to do a usb port power off when the Tripplite USB > hangs.  But hubs