search for: tormenta2

Hi everybody, I need to know about sound quailty issues from those who have experience with Tormenta2 PRI Interface. Also how to make it work with new versions of Asterisk and Zaptel. And also suggestion if it is a good idea to switch to some newer card from Sangoma or Digium, or Tormenta should work fine. I have sound breaking many times a day over the trunks. Server is AMD Athlon 2.4 GHz with 5...

Ok. I just got a TDM10B and it is in with my X100P. So as it says in the provided instructions, I used the command modprobe tor2 I get an error message saying that there is no such device. My zaptel.conf looks like this: fxsks=1 fxoks=2 So I load the X100P first. (modprobe wcfxo) Then I load the TDM10B (modprobe tor2) Then I'm told that the device doesn't exist. Please help

Hi, After upgrading to new version of Asterisk and Zaptel, my Tormenta2 card has stopped working. Zaptel doesn't detect it. What should I do to make it work again. It is enabled in /etc/sysconfig/zaptel. Where else I have to enable it so zaptel can detect it and make it work. zaptel.conf and zapata.conf are the same as I had them before. I tried googling but couldn...

Hello, I am very new to Asterisk, so please forgive me for my basic question. I couldn't find a good answer to this on the info boards. I'd like to know if the following is possible and reasonable to accomplish: I'd like to configure a voice recording system using Asterisk and a Tormenta2 Quad T1 card. A co-worker was able to create this system a while back with Bayonne and a Dialogic card, but I would like to do the same thing with much cheaper hardware. I do not believe Bayonne supports the Tormenta2. (I think it is also known as the Wildcard TE410P) When the user dials in: - H...

...: D0 PME-Enable- DSel=0 DScale=0 PME- And dmesg shows: NET: Registered protocol family 10 Disabled Privacy Extensions on device c0340020(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present Freed a Wildcard Unregistered Tormenta2 Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: KB1 Registered Tormenta2 PCI Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States /...

We have a DMS100 that does not have PRI. So we're using a channelized T1 using WU-LAW, ESF and B8ZS coming from the DMS100 that's plugged into a Tormenta2 Quad T1 Card on my Asterisk Box running Debian 3.01(woody) with Kernel 2.4.22. The Link is up but according to the DMS100, Channel_1 goes into RMB (Remote Manual Block) and Channel_2 goes into LO (Lock Out). I've been through all my Asterisk Configs with help from BKW_ in #Asterisk on IRC and...

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wan...

...No such file or directory grep: /lib/modules/2.6.16.13-4-default/build/include/linux/autoconf.h: No such file or directory make[1]: Entering directory `/usr/src/packages/SOURCES/Asterisk/zaptel-1.4.4' gcc gendigits.c -lm -o gendigits ./gendigits > tones.h gcc -o makefw makefw.c ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file ./makefw pciradio.rbt radfw > radfw.h Loaded 42096 bytes from file make -C /lib/modules/2.6.16.13-4-default/build SUBDIRS=/usr/src/packages/SOURCES/Asterisk/zaptel-1.4.4 modules make[2]: Entering directory `/usr/src/linux-2.6.16.13-4-obj/i386...

...on the non-working server: [ 1789.517727] Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xf6bff000/0xf6bfe800 irq 21 [ 1789.688024] Xilinx Chip successfully loaded, configured and started!! [ 1789.688185] Tormenta 2 Quad E1/PRA Card [ 1789.688463] Detected Card number: 255 [ 1789.688573] Registered Tormenta2 PCI This differs from the output on the working server. On the working server, you get the following: [ 133.359963] Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xd1000800/0xd1000000 irq 22 [ 133.512015] Xilinx Chip successfully loaded, configured and started!! [ 133.512113] Tormenta 2 Quad T1...

...tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7 Did not get DONE signal. Short file maybe?? Registered Tormenta2 PCI ZT_SPANCONFIG failed on span 1: No such device or address (6) /lib/modules/2.4.18/misc/tor2.o: post-install tor2 failed /lib/modules/2.4.18/misc/tor2.o: insmod tor2 failed asterix:~# The module is listed by lsmod: asterix:~# lsmod Module Size Used by Not tainted tor2...

...ng zaptel hardware modules: Running ztcfg: ZT_CHANCONFIG failed on channel 1: No such device or address (6) [FAILED] dmesg has this to say.. Zapata Telephony Interface Registered on major 196 Specify address with base=0xNNNNN Registered Tormenta2 PCI If I try with modprobe.. [root@dev02 root]# modprobe wcfxs /lib/modules/2.4.20-20.9/misc/wcfxs.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output...

...TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.co...

Hi All, I'm having a bit of a time getting my Tormenta 2 card to actually be seen by the system. Whenever I modprobe, the kernel spits out the following (in addition to the "insmod tor2 failed" messages): Invalid Xilinx 8 bit Base resource Registered Tormenta2 PCI Of course, the module says that its registered a Tormenta2 card, but it unloads the driver and frees related resources when it can't get a valid "Xilinx 8 bit Base resource". Heres the pertinent information: lspci -vvv 0000:05:03.0 Bridge: PLX Technology, Inc. PCI <-> IO...

...300864 0 tor2 98600 0 zaptel 207492 9 ztdummy,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2 crc_ccitt 6337 1 zaptel # dmesg ... Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.2.9.1 Echo Canceller: KB1 Registered Tormenta2 PCI usbcore: registered new driver wcusb Wildcard USB FXS Interface driver registered process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_rea chable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. ... # lspci -v ... 07:06.0 Communication controller: Motoro...

...d know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no alarm. Zapata Telephony Interface Registered on major 196 Registered Tormenta2 PCI Controller version: 24 FALC version: 00000000 TE110P: Setting up global serial parameters for E1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Freshmaker version: 71 Freshmake...

...TONEZONE -DSTANDALONE_ZAPATA - DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA - DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA - DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA - DZAPTEL_CONFIG=\"/etc/zaptel.co...

...s/net/wan -I /usr/src/linux/include -I/usr/src/linux/include/net -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DSTANDALONE_ZAPATA -c zaptel.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/linux/drivers/net/wan -I /usr/src/linux/include -I/usr/src/linux/include/net...

...the mailing lists suggest the Current card revision is H and the current FXO module revision is C. Does anyone know if the revision of card I'm using is more susceptible to echo problems? A dmesg also shows my card as a E/F REV. Zapata Telephony Interface Registered on major 196 Registered Tormenta2 PCI ACPI: PCI interrupt 0000:05:08.0[A] -> GSI 3 (level, low) -> IRQ 3 Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC m...

...e* rm -f tor2ee rm -f core US040814:/usr/src/zaptel # make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -o zonedata.lo zonedata.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_...

...TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.co...