Displaying 20 results from an estimated 20 matches for "tincvpn".
2015 Jul 21
1
Please help debug Windows setup
...dress of machine2.
Regular IPv4 address for both machines in 192.168.1.xxx range.
Router:
Forwarding port 655 to 101.102.103.1, UDP and TCP
Forwarding port 656 to 101.102.103.2, UDP and TCP
Tinc.conf on machine user1 just three lines:
Name = vpnuser1
ConnectTo = vpnuser2
Interface = TincVPN
TAP adapter (TAP-Windows Adapter V9) named TincVPN, and configured to 101.102.103.1 / 255.255.0.0
Tinc.conf on machine user2 just three lines:
Name = vpnuser2
ConnectTo = vpnuser1
Interface = TincVPN
TAP adapter (TAP-Windows Adapter V9) named TincVPN, and configured to 101.102.103.2 /...
2015 Jul 13
2
Please help debug Windows setup
...preciate thoughts on what I?m doing wrong?
Router:
Port 655 forwarded to 192.168.1.45, both TCP and UDP
Port 656 forwarded to 192.168.1.51, both TCP and UDP
Machine #1.
==========
Local IP address on LAN = 192.168.1.45
Windows Firewall allows all incoming TCP and UDP traffic for the Tinc.TincVPN service.
Tinc.conf:
Name = Adam
ConnectTo = Erika
Interface = TincVPN
BindToAddress = 192.168.1.45 655
Hosts/Adam:
Address = XYZ.ddns.org [WAN IP address, of router]
Port = 655
Subnet = 192.168.1.45
Hosts/Erika:
As below
Machine #2.
==========
Local IP address on LAN = 192.16...
2015 Jul 22
0
Please help debug Windows setup
...dress of machine2.
Regular IPv4 address for both machines in 192.168.1.xxx range.
Router:
Forwarding port 655 to 101.102.103.1, UDP and TCP
Forwarding port 656 to 101.102.103.2, UDP and TCP
Tinc.conf on machine user1 just three lines:
Name = vpnuser1
ConnectTo = vpnuser2
Interface = TincVPN
TAP adapter (TAP-Windows Adapter V9) named TincVPN, and configured to 101.102.103.1 / 255.255.0.0
Tinc.conf on machine user2 just three lines:
Name = vpnuser2
ConnectTo = vpnuser1
Interface = TincVPN
TAP adapter (TAP-Windows Adapter V9) named TincVPN, and configured to 101.102.103.2 /...
2012 Apr 24
2
tinc router mode on Windows 7
...uter mode and IP routing in Windows 7 PC (Network A
Server). The PC B is still unable to connect the Network A and PC A. But the
Network A and PC A is able to communicate each other via tinc. Please help
and advise me any incorrect of that.
Network A server
Real - LAN adapter IP: 192.168.1.1
tincVPN IP: 192.168.254.1
IP routing enabled = yes
Tinc.conf (Network A)
AddressFamily = ipv4
Name = NetworkA
Interface = tincVPN
Mode = Router
NetworkA
Subnet = 192.168.254.0/24
-----BEGIN RSA PUBLIC KEY-----
XXX
-----END RSA PUBLIC KEY-----
Tinc.conf (PC A)
AddressFamily = ipv4...
2014 Dec 20
1
New Protocol
...e New Protocol in 1.1Pre10?
Or should I just play it safe and run the old protocol for production?
How long do you think it will take for you to have confidence in the new
protocol?
When do you think you will gain that confidence?
You should be congratulated, I did NOT have to install OpenVPN - TincVPN
is WAY better.
Some learning curve, but still good.
What script is called when the link between nodes goes down?
What parameter is called and what environment variables are there for
determining which link went down? And came back up?
What is the logic you use inside TincVPN to determine a link...
2015 Jul 13
0
Please help debug Windows setup
...t 655 forwarded to 192.168.1.45, both TCP and UDP
>
> Port 656 forwarded to 192.168.1.51, both TCP and UDP
>
>
>
> Machine #1.
>
> ==========
>
> Local IP address on LAN = 192.168.1.45
>
> Windows Firewall allows all incoming TCP and UDP traffic for the
> Tinc.TincVPN service.
>
>
>
> Tinc.conf:
>
> Name = Adam
>
> ConnectTo = Erika
>
> Interface = TincVPN
>
> BindToAddress = 192.168.1.45 655
>
>
>
> Hosts/Adam:
>
> Address = XYZ.ddns.org [WAN IP address, of router]
>
> Port = 655
>
> Subnet = 19...
2013 May 10
1
Iptables rules and internet access problems
Hello,
I have faced some problems :
1. With iptables running i can't ping my tincvpn server but as i turn it
off i can. i have added all rules mentioned in examples but no success.
2. I want to get internet access on the client which is a win 7 computer
using tincVPN but i gained no success either (i can't use bridges because
server is a VPS using OpenVZ)
so any advice for so...
2018 Dec 05
2
Exposing extra subnet via Tinc
...; on the Windows machines, I don't see any routes
for that IP range.
Do I need to do any extra config on the Linux server, or do I need to
somehow configure additional routing rules on my Windows machines?
This is how I configured Tinc in /etc/networking/interfaces on the Linux
machine:
auto tincvpn
iface tincvpn inet static
address 10.123.1.1
netmask 255.255.255.0
tinc-net vpn
tinc-debug 1
tinc-mlock yes
tinc-user nobody
tinc-pidfile /run/tinc.pid
Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: &...
2014 Jan 07
1
Security: Best practices, apparmor, -L, -R, -U
...ESTABLISHED)
tincd 15136 root 11u IPv4 1315543 0t0 TCP
XX.XX.XX.XX:PP->XX.XX.XX.XX:PP (ESTABLISHED)
tincd 15136 root 12u IPv4 1315554 0t0 TCP
XX.XX.XX.XX:PP->XX.XX.XX.XX:PP (ESTABLISHED)
-U
Can I use user nobody or shall I better use an extra tincvpn user ?
Right now tinc is running as root
Apparmor ? Anybody got a profile ?
Or good ideas ?
BR
P.
2016 Feb 29
1
SystemD Trigger
...s" in
https://www.freedesktop.org/software/systemd/man/systemd.service.html.
I think using "After=" and "Recuires=" is more suitable.
On Mon, Feb 29, 2016 at 4:48 PM, md at rpzdesign.com <md at rpzdesign.com> wrote:
> Hello Tinc'ers:
>
> I want to use TIncVPN in a systemd Ubuntu environment.
>
> But I want other services to run AFTER tinc has started running and has
> its tun0 device initialized and ready.
>
> Does anybody have a suggestion on what I put into the service files so
> that they are ExecStart after Tinc has come up at boot...
2018 Dec 06
0
Exposing extra subnet via Tinc
...any routes
> for that IP range.
>
> Do I need to do any extra config on the Linux server, or do I need to
> somehow configure additional routing rules on my Windows machines?
>
> This is how I configured Tinc in /etc/networking/interfaces on the Linux
> machine:
>
> auto tincvpn
> iface tincvpn inet static
> address 10.123.1.1
> netmask 255.255.255.0
> tinc-net vpn
> tinc-debug 1
> tinc-mlock yes
> tinc-user nobody
> tinc-pidfile /run/tinc.pid
>
>
> Thanks!
>
>
-------------- nex...
2011 May 22
1
tinc vpn interface specific dns under Linux
....conf).
So adding DNS1=<ip of my DNS server available over tinc net> to
/etc/sysconfig/network-scripts/ifcfg-eth0
may get me somewhere to this goal.
But how can one add DNS1 to the tinc interface instance or at least
/dev/net/tun?
Can i just create a /etc/sysconfig/network-scripts/ifcfg-tincvpn file
and put the DNS entries in there?
Is there something i can do with tinc-up to set DNS for the tinc interface?
i am not going to add individual hosts to /etc/hosts.
man host.conf and man resolv.conf do not have the answer.
i thought for sure /etc/networks would be the solution, but 'man...
2016 Feb 29
4
need help on tinc route problem
yes, I have these in C host file:
Subnet=10.10.0.0/24
Subnet=0.0.0.0/1
Subnet=128.0.0.0/1 ## not metioned, because I think is maybe works in
same as 0.0.0.0/1
B host file doesn't have 0.0.0.0/1 and 128.0.0.0/1
I only added one route to 5.6.7.8 via B, not via C
On Mon, Feb 29, 2016 at 4:40 PM, Maxim Vorontsov <6012030 at gmail.com> wrote:
> hi.
>
> Are you add only
2018 Jan 06
3
Tinc at startup Debian 8 Jessie
Dear mailing list,
How do I make Tinc auto start on Debian 8 Jessie?
I’ve compiled and installed the latest stable release tinc-1.0.33 and I’ve tried this:
nano /usr/local/etc/tinc/nets.boot
Added the netname of my vpn
sudo service tinc start
Should work according to:
https://www.digitalocean.com/community/tutorials/how-to-install-tinc-and-set-up-a-basic-vpn-on-ubuntu-14-04
2016 Feb 29
0
SystemD Trigger
Hello Tinc'ers:
I want to use TIncVPN in a systemd Ubuntu environment.
But I want other services to run AFTER tinc has started running and has
its tun0 device initialized and ready.
Does anybody have a suggestion on what I put into the service files so
that they are ExecStart after Tinc has come up at boot time?
Thanks,
Marco
2014 Jan 09
1
tinc started from /etc/network/interfaces and not from /etc/tinc/nets.boot
...t jail plus converted
tinc-up and tinc-down scripts.
>From my /etc/network/interfaces:
auto VPN
iface VPN inet static
address 192.168.100.1
netmask 255.255.255.0
post-up /etc/tinc/VPN/vpn_tinc-up
post-down /etc/tinc/VPN/vpn_tinc-down
TINC_NET VPN
TINC_CHROOT yes
TINC_MLOCK yes
TINC_USER tincvpn
Question: If I have machines A,B and C in my tinc vpn and if I then add
machine D and only have the host file /etc/tinc/VPN/hosts/D on machine C
and /etc/tinc/VPN/hosts/C on machine D, will D be still able to talk to
machines A and B ? Is this what the host options StrictSubnets = yes and
TunnelSe...
2016 Feb 29
2
SystemD Trigger
On Mon, Feb 29, 2016 at 07:48:45AM -0600, md at rpzdesign.com wrote:
> I want to use TIncVPN in a systemd Ubuntu environment.
>
> But I want other services to run AFTER tinc has started running and has its
> tun0 device initialized and ready.
>
> Does anybody have a suggestion on what I put into the service files so that
> they are ExecStart after Tinc has come up at bo...
2014 Dec 08
2
Tricky VPN Configurations
...le server.
IS there someone who is more fluent on configuration files that might
share /tinc/serverX/tinc.up abd /tinc/serverX/tinc.conf files that would
address both of the included setups.
Thanks a bunch,
Marco
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TincVPN-Example.pdf
Type: application/pdf
Size: 29547 bytes
Desc: not available
URL: <http://www.tinc-vpn.org/pipermail/tinc-devel/attachments/20141208/e4799785/attachment-0001.pdf>
2014 Sep 25
1
Tinc1.1pre10 on Windows 8.1?
...tan
Error while decrypting: error:00000000:lib(0):func(0):reason(0)
Failed to decrypt record
Closing connection with titan
Could not set up a meta connection to titan
Trying to re-establish outgoing connection in 35 seconds..
Tinc.conf from adamthinkpad
Name=adamthinkpad
ConnectTo=titan
Interface=tincVPN
Mode=switch
relevant log file from titan: (sorry for only partial sanitization)
Connection from 199.212.67.46 port 58877
Sending ID to <unknown> (199.212.67.46 port 58877): 0 titan 17.3
Sending 13 bytes of metadata to <unknown> (199.212.67.46 port 58877)
Got ID from <unknown> (1...
2012 Dec 06
1
LAN discovery issue
...ing WLAN and
using an UMTS stick instead, so I connect from the outside).
Configuration:
tinc.conf on all three nodes (all running tinc 1.0.19 on Windows):
*******************
Name = [Name]
ConnectTo = Alpha (<-- commented out on Alpha of course)
Compression = 9
LocalDiscovery = yes
Interface = tincVPN
*******************
host files:
Alpha
*******************
Subnet = [single IP]/32
IndirectData = yes
Address = [DynDNS]
Port = [Port]
-----RSA Part-----
*******************
Beta
*******************
Subnet = [single IP]/32
IndirectData = yes
Address = [DynDNS]
Port = [Port]
-----RSA Part-----
*****...