search for: tincing

Hi, I have macosx 10.5.8 and Tunnelblick (openvpn) installed before. I have installed tinc using port and got version 1.0.11 (Jun 29 2010 15:10:51) now I have 2 problems: 1) the interface variable from the tinc.conf is not used, instead I have a tun0 interface (or tap0). 2) the tinc-up script seems to be fired too early as I get an error: ifconfig: interface /dev/tap0 does not exist when I run

ofcourse there is no freepbx, and there is no difference between the version of asterisk , ATM we are using asterisk 1.6.2.19 , i've also tried it on asterisk 1.10 , which resulted in the same way , does anyone have any ideas , why is it happening like this . thank you. On 9 January 2012 14:30, <tinc-request at tinc-vpn.org> wrote: > Send tinc mailing list submissions to >

Dear C?dric, If I am using windows version of tinc, how can I check the connection list? Regards, Eric -----Original Message----- From: tinc-bounces at tinc-vpn.org [mailto:tinc-bounces at tinc-vpn.org] On Behalf Of tinc-request at tinc-vpn.org Sent: Wednesday, April 18, 2012 6:00 PM To: tinc at tinc-vpn.org Subject: tinc Digest, Vol 90, Issue 17 Send tinc mailing list submissions to tinc at

I got the file that was sent to me the other day. Unfortunitly it did not solve my problems. After a lot of hacking I have been able to get release 1.0 to almost compile. I have finally gotten all of the dependancies worked out under OpenBSD 3.2. This next error has me stumped. I can tell that it is looking for a file but have no idea how to create the file. This is the output of the the

Oh, thanks, in my current case, I haven’t config “Address” parameter in A’s host config, is this will make A prohibited it listen on the tinc ports? Question: 1. if I config “Address” in A’s config, and even though A is in a private subnet, it might still possible for A to establish connection with X(X is public IP address)? 2. If there any parameter to disable the direct connection discovery,

actually at the moment the setup is like this , it has the same ip address , both lan and tinc , but iax doesn't work at all , moreover , i want to be able to make an IAX trunk to the rest of the machines from different networks together . what happens is that , asterisk says that the request is sent , but nothing will be received . if you want i can try to make a tcpdump tomorrow , and send

Hi everyone again. I run tinc with the following command: /usr/sbin/tincd -d1 --logfile=/var/log/tinc.log That creates the file "/var/log/tinc.log" correctly and reports into it. Well, because I want to have a log file by day, I have created a logrotate file (/etc/logrotate.d/tinc) that contains the following lines: ----------------------------------------- /var/log/tinc.log {

> - Indirectdata finally REALLY REALLY works now! > - More precise debug messages Hmmm ... I can't prove that using the CVS code I checked out this morning. Everything works like yesterday: I can ping the peer but I canot go beyond: *** SERVER *** Jun 27 09:04:56 lemon tinc.9[10186]: tincd 1.0pre3 (Jun 27 2000 08:53:56) startin g, debug level 4 Jun 27 09:04:56 lemon tinc.9[10186]:

I have 2 firewall in HA with keepalived. Can I use active the same tinc configuration on 2 firewalls ? using tun Interface with same ip on all 2 nodes is a problem ? tun device advertise itself on the network having an IP/MAC pairs (ARP) or the IP is only used by the system internally for routing so using the same configuration is right ? so one firewall be active, the other is passive. With this

Okey, this is new and better version. Now we handle wait up to hardcoded (for now) value. After wait (IP stack reconf or timeout) we launch 'tinc-up' script. To handle initial TAP device traffic, script is now launched in separate thread. This version works 100% for me under Win2003. ---------- Original message ---------- From: borg at uu3.net To: tinc-devel at tinc-vpn.org Subject: Re:

H, Narcissus Quick one for the below case, if node A have a direct connection to node B, and node B have a connection to node X, then I found node A will be able to talk to node X, but the communication path is go through node B, instead of build direct connection between A and X, is that right? I tested this in my environment. A >> B >> X > On 1 May 2017, at 3:07 PM, Narcissus

So, for remote manageability of Tinc, we don't have any SNMP or REST like programmatic ways? If it is going to be CLI only, it is definitely not secure to manage and also not very convenient to manage programmatically. On Sun, Mar 25, 2018 at 1:44 AM, Guus Sliepen <guus at tinc-vpn.org> wrote: > On Sat, Mar 24, 2018 at 02:16:20PM -0700, al so wrote: > > > > Is there

Hey Saverio, I'd really like the idea of a tinc-1.1-pre package for OpenWRT. I'm currently using tinc-1.1 with an Ed25519-only network, really like the new features and CLI and want to add some OpenWRT routers into the mix. How do you plan to handle things with OpenSSL? tinc-1.1 from git should be able to compile without it (but will then only support the built-in algorithms). Depending

Hi, Tinc experts Diagram as below, A is trying to access host X behind C: A >> B >> C — “host X" B is the tinc server for A, but also B is the tinc client to connect to C. My question is, if I only use one VPN (/etc/tinc/myvpn), then the host configuration for B will be tricky. As the tinc server to A, B’s host config (/etc/tinc/myvpn/hosts/B) needs have the Subnet = X/32,

On Tue, Jan 27, 2015, Sandy McArthur Jr wrote: > I use the Tinc 1.0 series since I don't want to support my > own packages. <snip> > I wrote most of http://wiki.openwrt.org/doc/howto/vpn.tinc and that is > what I still use. Since then . . . Ok. I think I'll start with the 1.0 series packages that are already out there and get them working. and on Tue, Jan 27, 2015,

Thanks for replying so quickly Guus. I will try increasing the re-keying time to 86400, and am now running the servers in debug 5 mode logging to a file, so will get all output. Its interesting what you say about UDP being given lower priority, the two end points of this VPN are actually within the same data center, but are being routed within the DC's core routers (because its going

Hi Maxim See below. root at OpenWrt:/etc/tinc/acmevpn# modprobe -v tun -ash: modprobe: not found root at OpenWrt:/etc/tinc/acmevpn# lsmod tun Module Size Used by Not tainted crc_ccitt 928 0 root at OpenWrt:/etc/tinc/acmevpn# uname -a Linux OpenWrt 2.6.31.10 #1 Tue Jul 23 14:34:17 CEST 2013 mips GNU/Linux root at OpenWrt:/etc/tinc/acmevpn# opkg info

Here is some examples of using templates for TINC configurations and settings: In your startup script, BEFORE starting TINC VPN, put a number of entries to configure your VPN: sh ./templatewriter.sh LAN LOSI101 8540 255.255.255.0 0.0.0.0 10.99.0.11 10.98.0.11 ConnectTo=LOSI102 ConnectTo= ConnectTo= **PUT MORE ENTRIES HERE FOR MORE COMPLEX VPN setups ######Templatewriter.sh #!/bin/bash