search for: timer_register_expires

...rgency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "10.6.0.223" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "10.6.0.223" outbound_proxy_port: "5060" proxy_register: 1 timer_register_expires : 120 # NAT/Firewall Traversal nat_enable: "1" nat_address: "" voip_control_port: "5060" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "1" # Phone Label (Text desired to be displayed in upper right corner) ph...

Hello, When I restart asterisk the cisco 7960/7940 phones (sip fw 7.5) fail to re-register themselves with asterisk, even though I put "timer_register_expires: 60" in SIPDefault.cnf Is there a way to have these phones register themselves every 60 seconds? Alternatively, can asterisk be made to "remember" its dynamic sip hosts' registration after a restart? Thanks,

...r '64.169.xx.yyy' - Username/auth name mismatch What's the right way to do this. Shown below are my configuration files: </edg> -----SIPDefault and SIPMacAddr ----- image_version: P0S3-07-4-00 tftp_cfg_dir: "" ; Example: ./sip_phone/ proxy_register: 1 timer_register_expires: 3600 dial_template: dialplan messages_uri: 3688 telnet_level: 2 phone_label: "Nat One" line1_name: 3115552368 line1_shortname: 3115552368 line1_authname: 3115552368 line1_password: 3115552368 line1_displayname: "Nat One" logo_url: "http://192.168.1.45/pts.bmp" nat_add...

Hello all, I've got a Cisco 7960 running version 7.4 firmware (heard there were problems with 7.5) and I can't get it to register with Asterisk. I've stripped down my configs on the phone to a bare minimum, and posted them below. Basically, the Cisco phone sends absolutely no packets to the proxy when it gets booted. If I make an outgoing call I see traffic getting to Asterisk, but

I cannot get incoming calls to sip phones behind a PIX to work, outgoing is fine. Asterisk (Public IP) --> Internet --> PIX (NAT) --> Sip Phones I have tried no fixup protocol sip, I have punched a hole in the Pix allowing anything from the Asterisk box into the network, still no incoming. I have done all the Wiki suggests in regarding to NAT. Is their a trick getting the

...; voip_control_port: "5061" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "0" # Proxy Registration (0-disable (default), 1-enable) proxy_register: "1" # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: "3600" # Codec for media stream (g711ulaw (default), g711alaw, g729) preferred_codec: "none" # TOS bits in media stream [0-5] (Default - 5) tos_media: "5" # Enable VAD (0-disable (default), 1-enable) enable_vad: "0" # Allow for the bridge on a 3way c...

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

...ency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "192.168.2.1" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "192.168.2.1" outbound_proxy_port: "5060" proxy_register: 1 timer_register_expires : 120 # NAT/Firewall Traversal nat_enable: "1" nat_address: "" voip_control_port: "5060" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "1" # Phone Label (Text desired to be displayed in upper right corner) ph...

...t; voip_control_port: "5061" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "0" # Proxy Registration (0-disable (default), 1-enable) proxy_register: "1" # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: "120" # Codec for media stream (g711ulaw (default), g711alaw, g729) preferred_codec: "none" # TOS bits in media stream [0-5] (Default - 5) tos_media: "5" # Enable VAD (0-disable (default), 1-enable) enable_vad: "0" # Allow for the bridge on a 3way cal...

...sipdefault.cnf # Image Version image_version: P0S3-06-3-00 # Proxy Server proxy1_address: ipaddress of A30P ; Can be dotted IP or FQDN proxy1_port: 5060 # Proxy Registration (0-disable (default), 1-enable) proxy_register: 0 # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 3600 # Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: g711ulaw # TOS bits in media stream [0-5] (Default - 5) tos_media: 5 # Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: 1 # Out of band DTMF Settings (none-disable, avt-avt enable (default...

...tted IP or FQDN # Proxy Server Port (default - 5060) proxy1_port: 5060 proxy2_port: 5060 proxy3_port: 5060 proxy4_port: 5060 proxy5_port: 5060 proxy6_port: 5060 # Proxy Registration (0-disable (default), 1-enable) proxy_register: 1 # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 3600 # Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: none # TOS bits in media stream [0-5] (Default - 5) tos_media: 5 # Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: 1 # Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_...

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47