search for: thermaltak

I noticed on the wiki that some of the production hardware (compaq) doesnt have a power connector to my knowledge. I have a compaq c6400 that I would like to use for Asterisk. However all the drives are hot swap and the dual redundant power supply bay are not something i really feel like soldering wiring to. How are people getting around this? Is there a magic 'fan card' that has a

...ulting disc" anymore, but ZFS still seems to be locking up after several minutes of usage. Thanks in advance for any suggestions how to best approach these problems. Server HW: Mobo: MSI K9N Diamond CPU: Athlon 64 X2 5200+ Mem: Corsair TWIN2x4096-6400C4DHX PSU: Corsair HX620W Case: ThermalTake Armor+ GFX: MSI N9600GT-T2D1G-OC HDDs: Spinpoint F1 HD103UJ (1TB, 32MB, 7200rpm, SATA2) All HDDs are the same model. The machine is not overclocked. This message posted from opensolaris.org

I'm looking to install a basic asterisk system for my church with: 8 inbound sip channels 8 sip handsets basic voicemail room to grow (maybe doubling each of the above) What would be a recomended system as to needed processor and memory? Thanks, Eric

Hi all, I took my decision to use Asterisk server for handling my VOIP calls...My next step is to choose the best hardware that I should use i order to have the best performance...Here I faced 2 choices for my hardware (CPU)... 1- Using Intel CPU or AMD 2- Use 32 or 64 bits Can you help me please to choose between the above choices and what is the advantage and disadvantage of each of choices

...ing power supplies for about 9 years now, > really high quality PSUs(last one I bought was about 4 years ago, can't > speak for their quality now). So for a top quality power supply for a mission critical desktop machine, which brand(s) would you reccomend? One of the towers I have is a Thermaltake Xaser 3 with lots of room, and I just bought a new Antec Sonata III tower with a 500 watt PS. > So BBU is certainly a nice thing to have but at least in my > experience isn't absolutely critical. Then for a Mission critical desktop machine, if you had to make a choice, would you go wi...

[192.168.0.0/24 Lan] v [Shorewall box ''Curtain'', 192.168.0.254, DHCP to ISP, and a OpenVPN tunnel 10.4.0.2] v [Internet] v [Shorewall box ''statler'' 130.241.25.165, and an OpenVPN tunnel 10.4.0.1] Now, i have set a rule on statler ACCEPT vpn $FW tcp smtp and i have as below. root@statler:/etc/shorewall# cat zones | grep -v ^# net Net Internet

...---------------------------------------------------------------------- VGA Brand : Nvidia Model : GPU 4 CPU Brand : AMD Model : 2300+ Speed : 1800 I guess Operation System : Linux SP : Memory Brand : Kingston Type : DDR Memory Size : 1024 Speed : 400 Power Supply : 480 Thermaltake W 2 SATA HD-DRIVES 4ATAPI-DRIVES FLOPPY UNIT, TV CAPTURE CARD, EXTRA NETWORK CARD, 2 EXTRA USB CARD, and a lot of peripherals trow firewire & usb. -- Gustavo Guillermo P?rez Compunauta uLinux www.compunauta.com

This is my first post here, and i hope it is ok that i posted in this thread. I have been doing a bit of reading on the solaris platforms, and seem to be inclined to try out the open solaris os or solaris 10. My only worry is that my lack of knowledge with the command line may make this difficult regarding trouble shooting. It seems fairly straighforward creating zpools etc, but maybe nexenta is

...ing power supplies for about 9 years now, > really high quality PSUs(last one I bought was about 4 years ago, can't > speak for their quality now). So for a top quality power supply for a mission critical desktop machine, which brand(s) would you reccomend? One of the towers I have is a Thermaltake Xaser 3 with lots of room, and I just bought a new Antec Sonata III tower with a 500 watt PS. > So BBU is certainly a nice thing to have but at least in my > experience isn't absolutely critical. Then for a Mission critical desktop machine, if you had to make a choice, would you go wi...