search for: telstra

Telstra (Australian Telco) has recently introduced a feature to allow the sending of SMS direct to fixed analogue lines, with an appropriate handset. As best as I can figure out, this appears to use CID type signalling, or at least on a line that otherwise has no CID on it, CID is sent, but with a standar...

Hi, now that these cards have approval in Australia, has anyone had any luck in connecting them to a Telstra Onramp 10 service? Are these configured as a PRI, bchan=1-10, dchan=16 in zaptel.conf and switchtype=euroisdn in zapata.conf? Better yet anyone have any of the above .conf files they could share? Is an onramp 10 what is referred to as a 'channel bank'? Craig

...VERBOSE[8464]: == Primary D-Channel on span 1 up None of the configs have changed and the only difference is that we used the gentoo ebuild rather than doing it from source manually. Asterisk is even the same version. We are using libpri-1.0.9 zaptel 1.0.9 and Asterisk 1.0.9 It seems like a Telstra fault as there are no alarms showing, but the D chan just keeps bouncing, Telstra of course will not beleive me it could possibly be at there end. Has any one here encountered anything like this before? Regards, Andrew Thrift

Do any of the Australian Telstra users have some working tx/rx gain settins for the Sangoma cards on Telstra that I can try, echo is acceptable but not perfect using 0/0. I will also post them onto the wiki. Regards, Andy

...hen logs out with the > error message "fatal: login_get_lastlog: Cannot find account for uid > 232135350" in the syslogs. > > Do you have any knowledge of this problem please? > > > Regards > Joseph Gigliotti > IT Domain Specialist > Identity Solutions, Telstra Operations > Tel: (03) 9634 2436 / 0407 862 934 > _http://www.in.telstra.com.au/ism/identitymanagementsolutioncentre/_ > This communication may contain CONFIDENTIAL or copyright information of > Telstra Corporation Limited (ABN 33 051 775 556). If you are not an > intended recipient,...

Hello, We have an Asterisk 1.0.9 machine with a Sangoma A101 card fitted, it is connected to a Telstra OnRamp E1 in Melbourne, Australia. The problem we are experiencing is extreme echo and clicking noises. These are only audible to the calling party, e.g. the person calling in from the PSTN to Asterisk via the E1, the person on the SIP handset cannot hear any echo or clicking, only the PSTN s...

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes ca...

...e call.. This should be possible with AMP (call groups, 200|201|0*0408xxxxxx), but it didn't work, so I have created a custom-incoming in extensions-custom.conf What is happening is, The extension rings for about 5 secs (as long as it takes the TDM400 to dial the mobile number), then just the telstra mobile rings.. >From asterisk -vvvvvvvvvvvr -- Goto (custom-incoming,s,1) -- Executing Dial("SIP/202-b424", "Zap/g0/0408xxxxxx&Sip/200|30|t") in new stack -- Called g0/0408xxxxxx -- Called 200 -- SIP/200-fece is ringing -- SIP/200-fece is ring...

Hi folks, just a quick update.... we managed to solve our problem by getting telstra to turn of the STD pips on outbound calls. We don't the effect yet on inbound (but we haven't had problems in the past) as most of our lines with x100p's are generally only used for outboung. Gary .

Hi does anyone have a definitive list of countries other than those listed on the wiki which are supporting app_SMS on landlines using ETSI ES 201 912 ?? Thanks Tim Robinson Basingstoke, UK

...an < 1) Intresult = .95 if (InternalMean >= 1 & InternalMean < 2) Intresult = .85 if (InternalMean >= 2 & InternalMean < 4) Intresult = .70 ... if (InternalMean >= 9) Intresult = .0 Thanks in advance Glen Jones Value Analyst Industry Framework Governance Telstra Corporation Limited > Tel: (03) 9634 7280 email: glen.jones@team.telstra.com > The information contained in this e-mail message may be confidential. > If you are not the intended recipient, any use of, interference with, > disclosure or copying of this material is unauthorised and proh...

We are not having any luck with the E100p card here in Australia, it will work with a crossover cable to another device but will not talk to our Telco Telstra who probably have a weird implementation of an E1. Any suggestions on a replacement? Regards Mark McKibbin DCS Internet 64 Queen St Warragul Victoria 3820 Australia www.dcsi.net.au mark@team.dcsi.net.au Ph. 1300 665575 Fx. 1300 556595 -----Original Message----- From: Simon J Mudd [mailto:sj...

Afternoon all, After doing some test on my asterisk box I can successfully receive calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network Dial out from a sip phone is also not an issue, all calls connect and terminate normally. If I call the Asterisk PBX say from PSTN in Zap1-1 and out through ZAP2-2 back to the PSTN (after entering the correct pin off course) the card does not appear to detect the hang-up, I then have...

Hi, I am currently trying to find a replacement for a dinosaur PBX and want to replace it with a VoIP solution. We have just moved our lines over to an Optus Multiline from a Telstra ISDN Onramp 30 service with 100 lines. My question for you good people is what sort of hardware do I need to interface Asterix into the Optus Multiline? The Optus service is terminated in my office to a SHDSL NTU from Adtran and has two RJ45 conenctors on the back of it. Has anybody tried this...

...aph="nsca") where mdist is the output matrix from my mst command, however this is not terribly map-like, so I'm looking for a better display that can be embedded in a document. Any assistance gratefully received! Fiona. > Fiona Wade > Project Manager > MARA > F&A > Telstra Corporation Limited > Tel: 03 9634 5674 > Fax: 03 9634 2874 > Email: fiona.m.wade at team.telstra.com > > The information contained in this e-mail message may be confidential. If you are not the intended recipient, any use of, interference with, disclosure or copying of this materia...

...laced two years ago and he is running a 7000 acre property by himself. So I decided to stay home for a while and offer a hand during the busy sheering season. Now, I was hoping to get some work on Ferret done at night but getting the internet connected turned out to be next to impossible thanks to Telstra. I should point out that my parents property is not that remote. We are less that 4 hours drive from Sydney and about 1 hour from Canberra (ur closest metropolitan area) but for some reason we get no mobile (cellphone) or wireless internet coverage and the phone lines are so bad that even dial up d...

Hi, Just wondering if there are any people out there using the Zaptel Wildcard E1 interfaces on Telstra PRI?s in Australia. If so, is anyone happy to share their config? Thanks, Phil --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.510 / Virus Database: 307 - Release Date: 14/08/2003

I'm planning a system, just need to know if it works with Telstra's network. Cheers, Clint Sydney, Australia

Hello, I'm researching the possibility of using VOIP (SIP) with an existing PABX system. Ideally, the setup would be to dial an outside line through the PABX (that would actually link to the the VOIP gateway). At this point I would prefer not to purchase a hardware-based VOIP gateway. I would prefer to use a software-based gateway for research & testing purposes. Could anyone please

...t I currently pay my telco, and would like to extract my CDR's and add an additional field displaying the actual price paid for the call. I would like to do this based on destination phone number, and outgoing channel. However, I have a few difficulties: 1) I pay a different rate for calls to Telstra mobiles as I do to any other mobile, yet *all* mobile numbers are 04xx xxx xxx and there is no way (that I know of) to decide which carrier the number belongs to just from the number?? 2) I pay a different rate for national (std) calls depending on the distance to the destination, as well as wheth...