search for: tandems

Hi, I get an error with 'make check' in version 0.9.1 Testing asynchronous tandeming (44100Hz, 1ch, 240 samples, 8 - 88 bytes). Error: Signal out of expected range. 44100 1 240 8 258.102814 FAIL: tandem-test Anyone else - or is it just me? til

Hi all, I am trying to setup a ZAP interface to do MF signaling for a handoff to a 911 tandem. The signaling I need to perform on the T1 is this: 9-1-1 Tandem: Wink CLEC end office: KP (Keypulse) NPA ST (Start) 9-1-1 Tandem: Wink CLEC end office: KP I (Info Digit) NXX XXXX ST As I'm not as familiar with the Zaptel configurabliity, I'm not really sure how to do this. Do I dial twice

Hello, I have a carrier that is supplying me with DID inbound over SIP to my asterisk server. Because the CID is different with every call that is coming in the only way I have to authenticate this carrier is IP based. In my sip.conf I want to define this user as "type=user", however this can't work because Asterisk only authenticates users by username, not IP. I can take

I have a strange problem with echo. My setup includes a Grandstream HT-488 which is both an FXO and a FXS. I noticed last evening that if I called the FXS through my asterisk box from my cell, the resulting connection was fine for me at the cell end, but produced dramatic and conversation ruining echo at the FXS of the HT-488. Today I realized that if I call out from the same FXS to my

Trixbox 2.2 Beta with freePBX 2.2.0rc1 I have a setup that looks something like this in ASCII art: Teliax IAX Trunk ------+ | V Embarq PRI ----> Tandem switch ----> Ottawa Office Server------+ +--------------> Lima Office Server -----+|

I'm looking to use * for a HQ/branch office topology with fairly few calls over the WAN. The questions I have all pertain to the following architectural pic: http://www.45891.com/misc/arch.jpg I'm looking at a distributed architecture so users are somewhat functional when the link to HQ is down, with a centralized voicemail server to allow for transfer of voicemail messages from user to

Hi! My mail server works in tandem: Dovecot (IMAP) + Postfix. How can I configure in Gmail: Outgoing email copied to the Sent folder using postfix without mail client? This question is for the mailing list for Postfix? Mail client itself copies outgoing messages in the folder Sent, but the messages are large, and the server is far away. And to transmit email twice for sending and copying is

Hello, I'm building packages for Slackware and I've just tried to upgrade Slackware 13.37's CELT package to version 0.11.3, which apparently was released last year, but I've omitted it because it was not announced on the site. Anyway, now that I try build with the following configuration in my SlackBuild script: CFLAGS=$SLKCFLAGS -O2 \ CXXFLAGS=$SLKCFLAGS -O2 \

On February 9, 2016 7:28 PM, Darren Tucker wrote: > To: Randall S. Becker <rsbecker at nexbridge.com> > Cc: OpenSSH Devel List <openssh-unix-dev at mindrot.org> > Subject: Re: Test Failure OpenSSH 7.1 P2 on HPE NSE for key-commands > > On Wed, Feb 10, 2016 at 10:35 AM, Randall S. Becker > <rsbecker at nexbridge.com> wrote: > > Thread split from my

Hi everybody, I have a large fasta file(15M) which contains a lot of DNA sequence in fasta format.And i want to get probabilities matrix for 2nd order markov china from this background.Here is a web tool, http://tandem.bu.edu/markov.html.But i can not upload a large file. I wonder if there is a R packages can do this ,Thanks in advance . Jiantao Shi **

I'm specing out a new box to act as a tandem switch. It will have a TE410P with 4 x PRI and support IAX connections to four other boxes using predominantly ilbc and/or gsm. It also has 3 IAX trunks to Teliax for call routing also using gsm. No extensions actually terminate on the tandem, they're all switched to other boxes (highly distributed). On the PRI card, one goes to Embarq, the

Hi, I'm currently testing libcelt (celt-0.9.1) on my Openwrt/Kamikaze RDC-3210 platform and although I'm able to Crosscompile on my Ubuntu 10.10 machine without errors, the resulting celtenc doesn't seem to work properly. Ran ./configure via the Openwrt makefile first (activating fixed-point) ; I first produce a S16_LE Raw PCM file (48Khz, stereo) : test.pcm Then I try to encode

Hi , We've downloaded the CELTV0.11.1 source code from celt-codec.org . But having trouble with mathops-test and tandem-test unit test that exercises internal components of CELT codec, please find attached document for each test case failure in details. Also could you please give some inputs on CELT Low complexity code and full version of the code, point me source code to CELT

Goodmorning everybody, I need to run an R program via SSH. Usually I open R, I run the program and I stay logged-in, waiting for the output. As a matter of fact, if I close the connection with SSH I loose the calculations and the output of my R program. What command I have to use in order to preseve the calculations and the output without staying logged-in a SSH connection? thanks in advance

For anyone using both and encountering trouble with stylesheets (specifically, the paths being incorrect in production mode)... Removing facebooker solves the issue. But I bet you don''t want to do that, eh? So, simply setting ActionController::Base.asset_host = '''' also works like butter. I''m not 100% clear on why asset_host has anything to do with

Hi everybody: Here is the latest issue of Ogg Traffic. The HTML version is at http://www.vorbis.com/ot/20030715.html. Enjoy! Carsten. <p>Ogg Traffic for Tuesday, July 15, 2003 Author: Carsten "Purple" Haese Contact: [1]carsten@xiph.org Date: July 15, 2003 Table of Contents 1 Status Updates 1.1 Stan Seibert 1.2 Ed Zaleski

Hello, This request was initally sent to the -dev list, but I was advised to try rather here, thanks Steve. Here is the story: I was asked by a call center company to find a solution of an affordable multichannel system for recording their agents calls. Their basic demand is to handle recording of up to 60 simultaneous telephone calls. There are many sophisticated recording systems available

Is it possible to mix (sum) two or more compressed audio streams with either CELT or Opus? If not, could you add this functionality? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/opus/attachments/20111128/72223804/attachment-0002.htm

Hi I have written a whole bunch of methods for objects of class "octonion". [ an octonion is a single column of an eight-row matrix. Octonions have their own multiplication rules and are a generalization of quaternions, which are columns of a four-row matrix. ] So far I've done about a dozen generic functions such as seq.octonion(), rep.octonion(), [<-.octonion(), and so on

Hello, would it be possible to update config.sub and config.guess to the latest versions (or at least version from automake-1.13.1) in order to support new architectures based on the ARM 64 bit CPU? Patch: http://plautrba.fedorapeople.org/openssh/openssh-latest-config.sub-config.guess.patch Related Fedora bug: https://bugzilla.redhat.com/show_bug.cgi?id=926284 Thanks, Petr