search for: t400p

Hi, I've posted this question on OpenSS7 mailing list but I didn't get a clear answer. I have a system running asterisk using Digium T400P card. Can this same card be used with OpenSS7 project to carry SS7 links? Is there any difference between these two cards? -- Matteo D'Amato Network/Telecom Administrator Intelco Communication Inc

Anyone care to elaborate on the differences between the T400P and the TE405P? -Darren -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050908/e817f8bb/attachment.htm

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the Tormenta back in production, those wit...

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page (http://www.asterisk.org/index.php?menu=hardware). Are these cards any different from the TE4xxP cards?...

Can T400P be configured for nfas (one d-channel providing signaling for more than one span)? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030522/f2b637a9/attachment.htm

Hi, We are trying to validate Asterisk as a media gateway PRI <-> SIP with two T400P (8 T1s) per box. The first experience with BOX1 (Compaq, 2.53 GHz, 1 Gb RAM) and just one T400P was encouraging - on the load test with 3 T1s worth of calls we had on average 75% idle CPU. Not so with BOX2 (Dell, single 2.6 GHz Xeon, 1 Gb RAM, 2 T400P) and BOX3 (Dell, dual 2.6 GHz Xeon, 2 Gb RAM,...

Below you will find, what I believe to be a typical setup with a T100P card. My question is - 1. Is this correct? 2. What kind of phones would be needed here... (Would you have to use Digital phones) And if so what would you recommend. PRI/T1----- | | | ---------------- | | | Channel Bank | | |

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3068850018&category=3309...

...#39;ll have one big pipe on /dev/zap/1 accessible for you. > Unfortunatelly you cannot do clear=1-96 and have it all 4 spans > on /dev/zap/1. > > regards > Martin > > On Thu, 3 Apr 2003, Chris Albertson wrote: > > > > > Is there a block diagram or similar for the T400P? > > What about programming information? What documentation > > exists for it that a device driver writter might want? > > > > I need a T1 interface for a non-telephony application. > > All I need to do is get the raw bits into a computer > > > > The appli...

Hello Everyone, I have two never-used, still in the static-bag T400P Cards that I bought a long while back that I'd like to get rid of. Before I ever got a chance to use them, I bought Sangoma A400 Cards instead, and now I definately don't need them any longer. They have the Dallas DS21Q352 Chip on them (A4 Revision). I'll be happy to test them before...

Could anyone with any experience with * over a non-PRI T1 help this newbie? I have a fractional T1 that is working fine through a channel bank, but I can't get any response on * using a T400P. My analog line and the extensions work fine, but the T400P port 1 shows a red led (what exactly does that tell me?). I brought up zttool which shows a condition red also, but ztcfg shows nothing amiss. There is no change when I unplug the cable to the T1 or re-insert it. When I load * it gives n...

...speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank - modem In extensions.conf I have added the 'd'ata option. exten => 333,1, Dial(Zap/19,,d) In zapata.conf echo cancel has been turned off and I have experimented with different size jitterbuffers, none of whi...

Hi, is there anyone who have experience with more as one card in one machine ? Or, somebody from the Digium team who can make an assertion about this ? Regards, Thomas.

Another nibbage question: modprobe tor2 -v install /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg insmod /lib/modules/2.6.5-1.358smp/misc/tor2.ko ZT_SPANCONFIG failed on span 1: No such device or address (6) FATAL: Error running install command for tor2 dmesg states that the module is registered however. Am I doing something seriously wrong? I have my zaptel.conf configured as

I've been trying to get a Win 2000 RAS server working with my asterisk PBX for quite some time, to no avail. I've googled, I've tried loads of configurations, I've rewired phone lines, and still I am not winning the battle. Here's my config. PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS channels, On-Hook messaging disabled, the rest defaults for the channels. In zapata.conf I've tried with both busydetect=>yes and busydetect=>no.... busycou...

Hi, Is this card the same as the T410P, after all, it's made by Digium. There's one prior reference on the mailint list[1] but it didn't answer the question. There was also an SS7 status report[2] last June but it's doesn't seem to have lead anywhere either. There was post saying an SS7 release was immenent last September[3], but then silence. Any info anyone would like to

...e far end of the connection. As was pointed out in an earlier posting (and my tests confirm), digital cell phones don't generate an echo. System Diagram: +- PRI --> modem bank | LEC <-- PRI --> * with <--+ T400P <--+ | (pri) +- TDMoE --> * with <-- SIP --> sip phones LEC <------ analog line ---------------> X100P Gary Mart PS The modem connections have been working just fine afte...

Ok, if I missed something in the wiki please point me there with the correct search terms. Asterisk 1.0.7 (AAH really) 4 co lines from Bellsouth into a Diguim T400P. Polycom 501 x 4 on the desktops. My problem is on calls to or from the CO I hear a "pinging" (thing sonar ping in a submarine) every 12 seconds. You can set your watch to it. COuld this be a "call recording in progress" tone. I have not made any effort to turn on call r...

Hi, I have scanned through the archives of this list and found a number of question about hardware, but I just can not find the answer to my question. I am new to phone systems, I got "drafted" to come up with a new phone system for our company (I guess they figure since I know computers I know phone systems as well :O). We have 5 analog (I guess they are called PSTN lines) lines coming