Displaying 20 results from an estimated 49 matches for "t2xxp".
2009 Feb 09
1
Noisy Ring Back Tone with TE205P card
...Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
[channels]
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
language=es
context=default
switchtype=euroisdn
pridialplan=unknown
prilocaldialpla=national
signalling=pri_cpe
resetinterval=never
group=1
channel => 1-15,17-31
; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=2
channel => 32-46,48-62
##zaptel.conf###...
2009 May 19
2
Unable to make outbound calls
I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
I've got a 2 port T2XXP card attached with on T1 currently plugged in.
Inbound calls work fine, but outbound fail with the rather cryptic:
[May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 0 - Unknown)
There are similar threads I've found on the...
2013 Oct 31
2
issue with dahdi_channels.conf
Hello list
i have an issue with my dahdi_channels.conf
in span 1 when i use it like below i can do my outband calls without issue
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 17-31
context = default
group = 63
but when i add in channel 1-15 like: channel => 1-15,17-31
i receive all the time this message
chan_dahdi.c:9438 pri_fixup_principle: C...
2008 Nov 15
1
PBX -> PRI -> * -> Telco not working
...w this at least works.
And I can also send a call into the NEC system fine.
Does anyone know how to debug this? How can I see what data the NEC box is
sending over the signaling channel in * ?
dahdi/system.conf looks like:
------------------------------------------------
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
# To NEC System
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
# To E1
span=2,1,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Global data
loadzone = au...
2010 Jul 08
1
not sure what to change to point the timing to the at&t circuits?
...-23
# Span 2
span=2,2,0,esf,b8zs
bchan=25-47
dchan=48
echocanceller=mg2,25-47
# Span 3
span=3,3,0,esf,b8zs
bchan=49-71
dchan=72
echocanceller=mg2,49-71
# Span 4
span=4,4,0,esf,b8zs
bchan=73-95
dchan=96
echocanceller=mg2,73-95
# Global
loadzone = us
defaultzone = us
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource
1 TE2/0/1/1 Clear (In use) (SWEC: MG2) (EC: VPM450M)
2 TE2/0/1/2 Clear (In use) (SWEC: MG2) (EC: VPM450M)
3 TE2/0/1/3 Clear (In use) (SWEC: MG2)
4 TE2/0/1/4 Clear (In use) (SWEC: MG2)
5 TE2/0/...
2009 Apr 02
2
Dahdi, TE220 Device, and Asterisk Problem
Hello!
I am trying to configure my digium TE220 dual-span pci express card
with Dahdi. I seemed to have managed to set up the card with the
Dahdi kernel, as demonstrated by executing dahdi_scan:
[1]
active=yes
alarms=RED
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE220 (4th Gen)
location=Board ID Switch 0
basechan=1
totchans=31
irq=16
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[2]
active=yes
alarms=RED
desc...
2011 Aug 16
1
PRI Problem
...10] NOTICE[8002]: chan_dahdi.c:3043
my_handle_dchan_exception: PRI got event: HDLC Abort (6) on D-channel
of span 1
I am also showing CRC4 errors on span as well.
# asterisk -rx "dahdi show status"
Description Alarms IRQ bpviol CRC4
Fra Codi Options LBO
T2XXP (PCI) Card 0 Span 1 OK 1 0 2938622
ESF B8ZS 0 db (CSU)/0-133 feet (DSX-1)
I am leaning towards a misconfiguration on the span on the switch side
but here is my setup. Can anyone point me in the right direction?
# dahdi_hardware
pci:0000:06:08.0 wct4xxp+...
2011 Feb 05
11
Callback through extensions.conf?
Hello
I'd like to configure Asterisk so that...
1. I ring it from my cellphone with CID number displayed, just to
notify Asterisk that I wish to make a call
2. Asterisk waits until I hang up, calls me back, and prompts me for
the number I wish to call
3. Asterisk puts me on hold through Flash(), which is apparently the
equivalent of hitting the R key on European handsets
4. Asterisk calls the
2010 Apr 22
0
DAHDI User-User information "Message longer than it should be??"
Hi.
My configuration is Elastix 1.5.2-2 (asterisk 1.4.24, libpri-1.4.3-5,
dahdi-2.1.0.4-7 ) and OpenVox d210e connected to telco provider (Euro ISDN).
Here is my /etc/dahdi/system.conf:
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=oslec,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller...
2007 Jul 12
0
No subject
...ll the correct number it seems..
The telco side has the following in extensions.conf:
[from-pstn]
exten => _555573XX,1,Dial(DAHDI/g1/${ARG1},,T)
[from-nec]
exten => s,1,Dial(DAHDI/g1/${ARG1},,T)
The dahdi_channels.conf has:
; SPAN 1 connects to the NEC PBX system
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-nec
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
group = 63
; SPAN 2 connects to Telstra on 02 5555 7300 - 30 channel E1
; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=0,12
context=from-pstn
switchtype...
2010 May 31
0
Dahdi PRI T1 Setup for TE210P
...y help. I have sent 2 days on this and this is what I did:
1. I installed the card.
2. libpri-1.4.11 - dahdi-linux-complete-2.3.0+2.3.0 - dahdi-tools-2.3.0
3. dahdi_hardware: pci:0000:01:06.0 wct4xxp+ d161:0210 Wildcard
TE210P
4. cat /proc/dahdi/1 :cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF BLUE RED
1 TE2/0/1/1 Clear RED
2 TE2/0/1/2 Clear RED
3 TE2/0/1/3 Clear RED
4 TE2/0/1/4 Clear RED
5 TE2/0/1/5 Clear RED
6 TE2/0/1/6 Clear RED
7 TE2/0/1/7 Clear RED
8 TE2/0/1/8 Clear RED
9 TE2/0/1/9 Cle...
2013 Mar 21
2
Need help about round-robin
...32-46,48-62
dchan=47
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
# span=3,3,0,ccs,hdb3
# termtype: te
# bchan=63-77,79-93
# dchan=78
# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
# span=4,4,0,ccs,hdb3
# termtype: te
# bchan=94-108,110-124
# dchan=109
# Span 5: TE2/1/1 "T2XXP (PCI) Card 1 Span 1"
#span=5,5,0,ccs,hdb3
# termtype: te
#bchan=125-139,141-155
#dchan=140
# Span 6: TE2/1/2 "T2XXP (PCI) Card 1 Span 2"
span=6,6,0,ccs,hdb3
# termtype: te
bchan=156-170,172-186
dchan=171
# Global data
loadzone = us
defaultzone = us
thank you so much
-------------...
2006 May 23
1
Status: Provisioned, Down, Active - Long
Hi list!
I'm trying to setup Digium TE205P E1 card to work with my provider (and Ericsson BP 250 - this comes later). When I execute "pri show span 1" this is what I get.
pbxzg1*CLI> zap show status
Description Alarms IRQ bpviol CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0
pbxzg1*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000...
2009 Apr 02
4
meetme dahdi and zaptel
...for conference, user
introduction disabled
I've added...
dahdichanname=no
to /etc/asterisk/asterisk.conf
My thought was that would allow Asterisk to use Dahdi just as if it was ZAP.
asterisk*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0
0
T2XXP (PCI) Card 0 Span 2 RED 0 0 0
Span 2 is expected to be down as we don't have it connected to anything.
asterisk*CLI> zap show channels
Chan Extension Context Language MO...
2009 Jan 28
1
E1 conection to a Cisco2600
...channel of span 1
/etc/zaptel.conf
-------------------
# Autogenerated by /usr/src/zaptel/kernel/xpp/utils/genzaptelconf -- do not
hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
# Global data
loadzone = us
defaultzone = us
zapata.conf
-----------...
2009 Jan 16
0
No subject
...again along with show status.
>>>> Note that there is only 1 PRI currently attached.
>>>>
>>>> geriatrix*CLI> dahdi show status
>>>> Description Alarms IRQ bpviol
>>>> CRC4
>>>> T2XXP (PCI) Card 0 Span 1 OK 0 0
>>> 0
>>>> T2XXP (PCI) Card 0 Span 2 RED 0 0
>>> 0
>>>>
>>>> geriatrix*CLI> dahdi show channels
>>>> Chan Extension Context...
2015 Jul 07
2
DTMF issue
...Asterik uses both SIP in and out from an upstream provider
(Gradwell.com).
Is it still possible to set this when using SIP trunks only and not physical
hardware? The box does have a Digium ISDN card but the ISDN is no longer
used.
My dahdi-channels.conf file looks stock:
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel =...
2006 May 01
6
Problems with zaptel and TE210P
Hello,
I'm just starting out with asterisk and I'm playing around with the
system. Currently I have a Digium TE210P connected to a PRI on the
Asterisk server. I have a SIP soft phone on my laptop for testing that
is working fine. When I try to place a call from my soft phone I get
this from Asterisk:
May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to
create
2005 Aug 16
0
Solved: Unable to load module for TE406P
It works out that name "Unified t4xxp/t2xxp driver" is not accepted
anymore by 2.6.13 kernel.
Need to remove "/" for it to load properly
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of Boris Bakchiev
> Sent: Monday, 15...
2006 Mar 14
0
help required configuring card
...cat zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: ZTDUMMY/1 "ZTDUMMY/1 1"
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"span=1,1,0,esf,b8zs
e&m=1-24
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"span=1,1,0,esf,b8zs
e&m=1-24
loadzone = us
defaultzone = us
** Is this configuration is ok??
3.. Log in to asterisk through Web based console. Click on the maintanace...