search for: stipe

...1:/dataPool nebula2:/dataPool nebula3:/dataPool nebula4:/dataPool wrong brick type: replica, use<HOSTNAME>:<export-dir-abs-path> Usage: volume create<NEW-VOLNAME> [stripe<COUNT>] [replica<COUNT>] [transport<tcp|rdma|tcp,rdma>]<NEW-BRICK> ... I can create stiped or replicated only but can both in the same moment. tried with 3.2.5 and 3.2.4 stripe 2 replica 2 no luck. What might be a problem? thanks Wojciech

When I try to call from asttapi one number, I get message "No one is available to answer at this time (1:0/0/0)". Immediately after that I try to call the same number from SIP phone (the same one that is used with asttapi) and call goes true. What have I done wrong? This is how it looks on CLI. **** == Parsing '/etc/asterisk/manager.conf': Found == Manager 'tomo'

Hi list! When I'm doing transfer, to what context/priority does that call goes? Can it be changed? Is it the same for blind_tr/att_tr/and for transfer that appears when phone replies with - 302 "Moved Temporarily"? The thing is that I'm trying to transfer incoming call from E1 interface back to E1 interface. Transfers will occur when user is going out and sets up all call

...rvers. It is running FreeBSD 4-STABLE on dual CPU's with the embedded Dell Raid controller (amr driver). Attached are 3 disks of 145GB. On a RAID5 logical drive this gives me ~280GB storage. Up until the last reboot (35 days ago) the 'amrcontrol' status utility gave me: Logical drive 0 Stipes blah Size blah STATUS=OPTIMAL Now it gives: STATUS=UNKNOWN RAID0 No logical drives The only thing that happened in between was an update from 4.11-p-something to 4-STABLE. I failed to check the status and the check script failed to send out an SMS because of the UNKNOWN status. First I thought...

...e RAID5 with ext3 and created using mdadm, to store jpeg files on a rehdat 7.3 system. I need to write files to the RAID5 at the rate of 800 files per second, and each file is about 10-20 KB in size. I have tried using data-writeback and the noatime options while mounting, and I am also using a stipe-size of 4MB (since 4MB was the max that mdadm would allow me), and i have passed -R stride=1024, and -b 4096 to mkfs.ext3 while formatting the RAID5. Still, I keep getting "hiccups" every few seconds while writing the files.. mostly, these hiccups are at 5-second intervals, so it may su...

I'm having problem powering Cisco phone's (7940 and 7905) on Linksys SRW224P switch (with PoE functionality). I have tested three phone's, one is working (7905) and two aren't (7905 and 7940). I have plugged all three phones on same switch port with same cable! Do I need to change anything in phone configuration? Is there something wrong with Linksys switch? How can I troubleshoot

Hi list! I'm trying to setup Digium TE205P E1 card to work with my provider (and Ericsson BP 250 - this comes later). When I execute "pri show span 1" this is what I get. pbxzg1*CLI> zap show status Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 OK 0 0 0 T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0 pbxzg1*CLI> pri show span 1 Primary D-channel: 16 Status:

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

Where can I find documentation about manual configuration of Gluster peers/volumes? All documentation seems to be about the gluster CLI. I would prefer manual configuration to facilitate automation via scripts (e.g. Puppet/Chef). I also read in this list that it is possible to configure Raid10 via text files... I would also like to experiment with this setup. Any related documents on how to do

Hello, i have an 8 port sata-controller and i don''t want to spend the money for 8 x 750 GB Sata Disks right now. I''m thinking about an optimal way of building a growing raidz-pool without loosing any data. As far as i know there are two ways to achieve this: - Adding 750 GB Disks from time to time. But this would lead to multiple groups with multiple redundancy/parity disks. I