search for: standard_schmandard

...2 22:20:17 fairfax kernel: hub 1-1.1.1:1.0: Cannot enable port 4. > Maybe the USB cable is bad? > Oct 2 22:20:17 fairfax kernel: hub 1-1.1.1:1.0: unable to enumerate USB > device on port 4 > > I was able to get it to run unattended with this hack: > https://gathman.org/2016/07/30/Standard_Schmandard/ > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http...

On Fri, 5 Aug 2016, Marco Walther wrote: > On 08/03/2016 05:25 AM, Stuart Gathman wrote: >> I've made some progress getting this Tripplite to work: >> http://gathman.org/2016/07/30/Standard_Schmandard/ >> >> Basically, plug it into a USB hub that actually implements USB2.0, then >> power cycle the port when it hangs. It does seem to be a hardware >> problem with the USB controller. > Finally an idea;-) I had the same problem for a couple of years but since I >...

I've made some progress getting this Tripplite to work: http://gathman.org/2016/07/30/Standard_Schmandard/ Basically, plug it into a USB hub that actually implements USB2.0, then power cycle the port when it hangs. It does seem to be a hardware problem with the USB controller. On 05/24/2016 09:06 AM, Charles Lepple wrote: > On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: >> I have a tic...

...: > On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: >> On Fri, 5 Aug 2016, Marco Walther wrote: >> >>> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>>> I've made some progress getting this Tripplite to work: >>>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>>> >>>> Basically, plug it into a USB hub that actually implements USB2.0, >>>> then >>>> power cycle the port when it hangs. It does seem to be a hardware >>>> problem with the USB controller. >>> Finally an idea;-) I had...

?? Ubuntu Server 16.04.1 LTS NUT 2.7.2-4ubuntu1 NUT installed from apt CP1500AVRLCDa Complete problem description, with any relevant traces, like system log excerpts, and driver debug output. You can obtain the latter using the following command, as root and after having stopped NUT: Problem Description: Ubuntu is able to communicate fine with the ups for several hours. However, the UPS is

On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: > On Fri, 5 Aug 2016, Marco Walther wrote: > >> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>> I've made some progress getting this Tripplite to work: >>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>> >>> Basically, plug it into a USB hub that actually implements USB2.0, >>> then >>> power cycle the port when it hangs. It does seem to be a hardware >>> problem with the USB controller. >> Finally an idea;-) I had the same problem for a...

...the USB cable is bad? Oct 2 22:20:17 fairfax kernel: hub 1-1.1.1:1.0: Cannot enable port 4. Maybe the USB cable is bad? Oct 2 22:20:17 fairfax kernel: hub 1-1.1.1:1.0: unable to enumerate USB device on port 4 I was able to get it to run unattended with this hack: https://gathman.org/2016/07/30/Standard_Schmandard/ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161006/5c538ef1/attachment-0001.html>

...have a valid certificate. Could you send the correct link please? > >I tried from Texas, Miami, Virginia, and New York VPSes. Works fine. >Maybe try again, or check your local DNS? > >> I was able to get it to run unattended with this hack: >> https://gathman.org/2016/07/30/Standard_Schmandard/ > >-- > Stuart D. Gathman <stuart at gathman.org> >"Confutatis maledictis, flamis acribus addictis" - background song for >a Microsoft sponsored "Where do you want to go from here?" commercial. -------------- next part -------------- An HTML attachm...

...doesn't seem > to have a valid certificate. Could you send the correct link please? I tried from Texas, Miami, Virginia, and New York VPSes. Works fine. Maybe try again, or check your local DNS? > I was able to get it to run unattended with this hack: > https://gathman.org/2016/07/30/Standard_Schmandard/ -- Stuart D. Gathman <stuart at gathman.org> "Confutatis maledictis, flamis acribus addictis" - background song for a Microsoft sponsored "Where do you want to go from here?" commercial.

...ave a valid certificate. Could you send the correct link please? > > I tried from Texas, Miami, Virginia, and New York VPSes. Works fine. > Maybe try again, or check your local DNS? > >> I was able to get it to run unattended with this hack: >> https://gathman.org/2016/07/30/Standard_Schmandard/ > Stuart, The issue is the certificate presented by your server (gathman.org) is not signed by a well-known CA. Also, it looks like the certificate is valid only for fairfax.gathman.org, while the URL you provided is to gathman.org. Because of this, normal browsers will complain about the ce...

Hello fellow victim of Tripplite braindead USB! There is a solution! My blog on diagnosing the problem: https://gathman.org/2016/07/30/Standard_Schmandard/ My blog on packaging the solution: https://gathman.org/2016/11/09/Packaging/ Solution on github: https://github.com/sdgathman/trippfix Sadly, you will have to buy a USB standard conforming powered hub to make the Tripplite work. These are suprisingly hard to find, but the solution includes a l...

On 08/03/2016 05:25 AM, Stuart Gathman wrote: > I've made some progress getting this Tripplite to work: > http://gathman.org/2016/07/30/Standard_Schmandard/ > > Basically, plug it into a USB hub that actually implements USB2.0, then > power cycle the port when it hangs. It does seem to be a hardware > problem with the USB controller. Finally an idea;-) I had the same problem for a couple of years but since I use a [1st gen] appleTV as th...

OS: Debian 3.16.36 Nut version: 2.7.4 from the ?stretch? distribution (this was to solve another problem ? which it did) Install method: apt-get Device: TRIPPLITE SMART1300LCDT using usbhid-ups driver Problem: I keep getting the message UPS tripplite at localhost is unavailable If I do? service nut-server stop service nut-server start Then everything is fine again for a while.

Hi, - The device never re-connects to the system, i have to physically remove the USB plug and insert it again for the device to come back. - This does not happen when running the driver from the supplier. (java process) - When i poll every 60s it works for about 3 days, anything lower or higher causes it to disconnect faster - The big log i sent is not the output of the driver? if not how can i

I bought this UPS to use with NUT. I've used Belkin, APC, CyberPower, Best, Powerware upses with NUT on dozens of servers beginning with RHEL3. http://www.amazon.com/Tripp-Lite-Display-Protection-SMART1500LCDT/dp/B009TZTGWK Since this was advertised as USB HID, I didn't expect any problems. Bad idea (should have gotten the Cyberware with somewhat less runtime). Initially, it seems to