search for: spa3102

Hy all, Recently a have a little problem with a Cisco device, SPA3102. I use this device with asterisk to dial out with outbound trunk. (SPA3102 has 1 FXO port) It working ok , but the device SPA3102 do this : when a call is placed for outgoing in asterisk and send to SPA3102 , this device "answer and dial the number in the same time" , in my CLI I see t...

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP --> SPA3102 Phone Port <-- analog --> Analog phone When a cal...

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I did the SPA3000 and the Linksys PAP2T. For example, in all three cases this is...

Ok, I downgraded spa3102 to 3.3.6. Now when I make a call from pstn and call is established asterisk seems to drop the call. However I still hearing ringback on pstn side, call is established again, and asterisk drops the call again, like a loop. -- Executing [preat_admin at nodo:1] Playback("SIP/PSTN-08214948&qu...

Hi All, In our small office calls to the PSTN are currently sent via Asterisk and a Linksys SPA3102 (1 x FXO and 1 x FXS): SIP Phone --> Asterisk --> Linksys SPA3102 --> PSTN If the PSTN is in use on SPA3102 I need a way to get the call to then route out over IAX termination. SIP Phone --> Asterisk--> Linksys SPA3102 --> PSTN (In Use) --> U...

I have a big headache. I have an Asterisk server connected to an Avaya PBX. Everything is working between those two. The problem is that I have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the Internet to the Asterisk server through a Fortinet firewall. When calling from a PAP2T I get one way audio, the remote site can hear me but I cannot hear them. If I do an "rtp debug" I can see rtp going out but none coming in. The even stranger part is tha...

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

Hi, I've read in this mailinglist archives some notes related to Linksys SPA3102 provisioning but I couldn't find there the answer I'm looking for. Is it possible with this box (mine is unlocked) to store its config file(s) in a TFTP server, and have this(these) file(s) reloaded at boot time, for instance ? In embedded web server, there is a Provisioning tab full of se...

Hello, i have a SPA3102 and asterisk v. 1.2.18. I also hev a mysql database with cdr. Well all I want is to receive incoming calls from pstn on specified sip account (suppose 8000), and to initiate outgoing calls from all my asterisk sip accounts through SPA3102 device. Someone can explain me what may i set on SPA and ast...

Somebody has 5.1.7 firmware for SPA3102? I'm having issues with inbound/outbound calls using asterisk through SPA3102 with firmware 5.1.10. I've read it has a codec bug, since it doesn't care about what you set up in Preferred Codec. Any help will be appreciated. Sebastian -------------- next part -------------- An HTML att...

...Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC channel suggested the Cisco SPA3102 and a cordless phone? This devices appears to be able to register to an Asterisk server (there are many related forum and BLOG posts). Does anyone have an opinion for or against this device? Alternatives. It is important that the device, or handset, be wireless/cordless. The WiFi hub in the ve...

I am looking for a simple way to send occasional faxes via the FXO port on my SPA3102 -- without having to connect a fax modem to an ATA. In an ideal world, this would be some sort of "softfax" that runs on my Linux desktop and talks (via Asterisk) to the SPA3102 with T.38. This is one of those things that I thought would be relatively straightforward, but a couple of ho...

Hi - I got a SPA3102. I've set it up without to many problems. If the unit looses power, calls to the PSTN are bridged which is nice. However, if the Asterisk server is unavailable (I turned it off to test), calls out are not bridged to the PSTN. I've rebooted the SPA3102 with the asterisk server of...

Hi. I have a SPA3102 updated with with Software Version: 5.1.7(GW). I have this settings on Voice/Regional: Interdigit Long Timer: 10 Interdigit Short Timer: 3 Anyway, when hooking up (without dialing anything), the timeout starts after 3 seconds. It's like the Long Timer is unused. After dialing, the Short Tim...

I'm faxing from stand alone fax machine via linksys SPA3102 but most of the time only half or quarter page goes through. Did anybody have any experience like this? -- #Joseph

Hi I am trying to setup asterisk at home, I have 1 in bound VSP (I have a register cmd setup for that in asterisk). At home I have a cordless phone with 2 line capability - I currently have 2 spa3102's in place to handle the 2 lines ( I am in the process of buying tdm410 to handle to handle this and the backup pstn line). I also have 2 laptops setup with soft sip phones. What I would like to see happen is when an inbound call comes, I would like to ring 1 line on the cordless phones - bec...

Hello all. I am just getting back into Asterisk and I am setting up my Linksys SPA3102. I have incoming calls working fine, as is the phone plugged into the unit. My problem is I cannot get the SPA3102 to dial a phone number automatically. I can call the extention of the PSTN and I get a second dialtone, and I can then manually dial. I'd like to be able to have Asterisk p...

I'm missing something simple I think: I have an spa3102 for which I want asterisk to use the incoming pstn callerid when it sends the call to a local extension (207). callerid works fine for the internal phones (between each other) The spa3102 is picking up the PSTN callerid and displays it in its own status pages Asterisk however, doesnt see the call...

...tart. http://www.viagenie.ca/publications/2007-03-apricot-asterisk-primer-blanchet.pdf * Fedora 9 (my desktop and the same at home). IP: 192.168.1.141. IPTables disabled. * installed asterisk as a fedora root user: # yum install asterisk asterisk-sounds asterisk-voicemail I bought: * 1 Linksys SPA3102 (1 FXS, 1 FXO) * 1 Linksys PAP2 (2 FXS) * 3 old panasonic analog telephones * 1 telephone line (also called POTS, PSTN) from my city provider. * Connected between them (easier as connecting your microwave oven). Phones go to the FXS/PHONE ports. POTS/PSTN go to the WALL/LINE/FXO port. Ethernet por...

I need another Sipura 3K and the replacement I think is Linksys SPA3102. Any input on how reliable is it? -- #Joseph GPG KeyID: ED0E1FB7