search for: softdtmf

I have been using chan_capi and a Fritz AVM (passive) card for a little while now.. So far so good.. There are still a couple of things I am not totally sure about.. First.. What is the difference between "softdtmf=0" and "softdtmf=1"?? Which is the preffered/recommended option?? Second.. What is Early B3 all about?? Should I be using it in my dial string?? Which is the preffered/recommended option "b" or "B"?? Thanks.. -- ______________________________________________ h...

...ions) eg: BAAAAAA00 BAAAAAA20 etc Requirement: - To be able send Indial numbers as Caller ID when dialing out. Configration: capi.conf --------- [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=BAAAAAA incomingmsn=* controller=1 softdtmf=1 accountcode= context=main-menu usecallerid=yes callerid=asreceived ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 pickupgroup=1 devices=2 mode=immediate isdnmode=ptp msn=BAAAAAA incomingmsn=* controller=2 softdtmf=1 accountcode= context=main-menu usecallerid=yes callerid=asreceived call...

...i.conf is edited. I have tested both separate and cards are working well. But they are not working together. It seems that when i set up settings for the other card: ;capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=50 incomingmsn=* controller=1 softdtmf=0 context=demo devices=2 msn=50 incomingmsn=* controller=2 softdtmf=0 context=demo devices=2 only controller 1 is working. capiinfo shows me both cards properly. when i tried this capi.conf configuration: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=5...

...ISDN-phone (Extens: 251). At the moment only the 3 BRI lines were connected. Do you know how to do that? Maybe like this: /etc/asterisk/capi.conf ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [ISDN2] isdnmode=ptp msn=51 incomingmsn=251 controller=4 softdtmf=1 accountcode= context=Amt callgroup=2 devices=2 [ISDN1] isdnmode=ptp msn=3899231 incomingmsn=* controller=1,2,3 softdtmf=1 accountcode= context=Intern-ISDN callgroup=1 devices=6 /etc/capi.conf #SuSEconfig.isdn generated # card file proto io irq mem cardnr options c4 c4.b...

...MSN's on the same ISDN/Fritz! card under seperate contexts. ------------------------------------------------------------------ [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.4 echocancel=yes ; [interfaces] context=work_incoming msn=123456 incomingmsn=123456 controller=1 softdtmf=1 accountcode= devices=2 ; context=pers_incoming msn=654321 incomingmsn=654321 controller=1 softdtmf=1 accountcode= devices=2 ------------------------------------------------------------------------ ------------ No matter how hard I try using the new syntax, I can't get outgoing calls to use...

...CLID at all. Any ideas? ; use 0703241432 as outgoing msn exten => _070.,1,Dial(CAPI/@0703241432:${EXTEN}|30|r) in capi.conf I have: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 ;rxgain=0.0 ;txgain=0.0 [interfaces] msn=0703241432 incomingmsn=703241432 controller=1,2 softdtmf=1 accountcode= context=default ;echosquelch=1 echocancel=yes echotail=64 ;deflect=12345678 devices=2 msn=0703241434 incomingmsn=703241434 controller=1,2 softdtmf=1 accountcode= context=default ;echosquelch=1 echocancel=yes echotail=64 ;deflect=12345678 devices=2 Thanks, Patrick

...SN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppres...

...ISCONNECT_IND ID=002 #0x0a68 LEN=0014 Controller/PLCI/NCCI = 0x101 Reason = 0x3400 Now I do have a capi_conf file that in my opinion should send inbound calls to a different context: [interfaces] msn=0221591030 incomingmsn=221591030 controller=1 devices=2 softdtmf=1 callgroup=1 context=from-chan_capi Can anybody help me understanding if the incoming call gets answered and if so why it is sent to a default context? What is an invalid handler? Thanks in adavance Aldo

...=> _9.,4,Congestion /etc/capi.conf contains : c2 c2.bin DSS1 - - - - P2P c2 c2.bin DSS1 - - - - P2P /etc/asterisk/capi.conf contains : [general] nationalprefix=0 internationalprefix=00 rxgain=0.9 txgain=0.3 ; interface sections ... [ISDN1] isdnmode=DID incomingmsn=* controller=1 group=1 softdtmf=on relaxdtmf=on accountcode= context=capi-in holdtype=hold echocancel=yes echotail=64 bridge=yes callgroup=1 devices=2 [ISDN2] isdnmode=DID incomingmsn=* controller=2 group=1 softdtmf=on relaxdtmf=on accountcode= context=capi-in holdtype=hold echocancel=yes echotail=64 bridge=yes callgroup=1 devi...

Has anyone a working /etc/asterisk/capi.conf example for Germany or Switzerland using the AVM C4 - ISDN Card. I try to connect asterisk to 3 wires BRI-ISDN (Swisscom). I appreciate your help and it would save me a lot of time, figuring it out by myself. regards, Claudio

...ut. > > Configration: > capi.conf > --------- > > [general] > nationalprefix=0 > internationalprefix=00 > rxgain=0.8 > txgain=0.8 > > [interfaces] > mode=immediate > isdnmode=ptp > msn=BAAAAAA > incomingmsn=* > controller=1 > softdtmf=1 > accountcode= > context=main-menu > usecallerid=yes > callerid=asreceived > ;echosquelch=1 > ;echocancel=yes > ;echotail=64 > callgroup=1 > pickupgroup=1 > devices=2 > > mode=immediate > isdnmode=ptp > msn=BAAAAAA > incomingmsn=* >...

...gain=0.8 ;ulaw=yes ;set this, if you live in u-law world instead of a-law [123456] ; Master number for line - i.e. number for line before MSNs were allocated ; and which still works and still accepts incoming calls. isdnmode=msn msn=01234123456 ;incomingmsn=* incomingmsn=123456 controller=1 softdtmf=1 accountcode= context=isdn-in echosquelch=1 echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 [123457] ;first MSN msn=01234123457 ;incomingmsn=* incomingmsn=123457 isdnmode=msn controller=1 softdtmf=1 accountcode= context=isdn-in echosquelch=1 echocancel=yes ;echotail=64 ;callg...

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP client is SJPhone (G711) on Windows connected to * via a 100Mbit switched LAN. PSTN connection is using latest ch...

Hi List, I'm having a problem with detecting incoming dtmf tones with chan_capi, using an AVM Fritz card. I have set up softdtmf and relaxdtmf, both to 0, expecting that the capi module will detect the tones, but it did not. I also set both to 1, expecting that the asterisk dsp functions will detect them but it did not either. Can anyone provide any ideas how to overcome this issue? Esteban ____________________________...

I have 10 msns on my isdn bri incoming (AVM Fritz, chan_capi 3.5) When i set in capi.conf [interfaces] msn=1,2,3,4,5,6,7,8,9,10 incomingmsn=* controller=1 softdtmf=1 accountcode= context=tcom-in echocancel=yes devices=2 Only msn 1,2,3 are working. What can i do? Thanks Jens

...s, so two HFC cards should be all I need. Any help, pointers and tips are greatly appreciated. Thanks for your time. rgds pos PS: Current CAPI.CONF settings: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=123456 echosquelsh=1 incomingmsn=* controller=1 softdtmf=0 context=default ;echocancel=yes ;echotail=64 ;deflect=12345678 devices=2 callgroup=1

...SN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppress...

...s name 'ISDN1' and may be any isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number of this interface/port group=1 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or accountcode= ;PBX accountcode to use in CDRs...

...d to an PTMP ISDN Line I can't find good documentation about how to configure capi.conf. Here is my actual config (capi.conf) [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] isdnmode=ptmp msn=073266xxxx controller=1,2 context=demo devices=2 incommingmsn=* softdtmf=0 here the output from the chan_capi initialization [chan_capi.so] => (Common ISDN API for Asterisk) May 27 16:47:00 ERROR[1024]: chan_capi.c:2664 load_module: Unknown isdnmode parameter "ptmp" -- ignoring May 27 16:47:00 NOTICE[1024]: chan_capi.c:2338 mkif: ast_capi_pvt(0732663288,...

...0.3.5-11 - Debian Sarge on Linux 2.6.15.1 - FritzCard module built from the latest sources available by AVM My capi.conf looks like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=3413 incomingmsn=3413 outgoingmsn=3413 controller=1 softdtmf=1 accountcode= context=isdn_incoming If you need any more information on my * configuration, please feel free to ask. Thanks in advance!! Regards, Christian Schmidt