search for: snapgear

I just installed Xandros 2.0 Desktop. I used apt-get to install iproute. I then downloaded wondershaper 1.1a from the website. I edited the script as the readme says. I went to console and started the wondershaper script...and i get the following error messages. RTNETLINK answers: Invalid Argument many times. Any ideas what is wrong? MArk _______________________________________________

Greetings, I''m new to LARTC and I''m trying to solve a problem with multiple clients accessing a game server. So I thought I''d give traffic control a shot. I''ve downloaded Wonder Shaper and have added this to the default script: tc filter add dev $DEV parent 1:0 protocol ip prio 12 u32 \ match ip protocol 0x6 0xff flowid 1:3 I''m now quite sure

Dear OpenSSH developers, I tried porting OpenSSH-4.3p2 to arm-linux (IXP425 Xscale platform) using openssl-0.9.8b and uClibc. This on the snapgear 3.2.0 distribution. It all compiles without problems, but when i run any openssh executable it will always show output similar to the following: # ssh sh: /usr/bin/ssh: No such file or directory # I checked for the libraries, they are all in /lib. To give you an ls: lrwxrwxrwx 1 0 0...

we have an external 2Mbit dsl connection and running on it are several gre vpn tunnels so far i''ve given priority to the vpn traffic (using htb) can i now put rules in for the tunnels to control traffic within each tunnel (that''s where our video conferencing etc runs)? or can i only control the real interface (eth1 in our setup)? if not can i somehow see the packets inside the

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

Hello, I connected the network 192.168.1.0 with 192.168.2.0 over the internet trough a GRE-Tunnel. I don''t know if I set up all things right: The client-pcs in both networks have a subnet mask of 255.255.255.0 and 192.168.2.x''s default gateway is the server wich has started the tunnel. The 192.168.1.x''s default gateway is 192.168.1.250 wich routes traffic destinated to

...Service (Samba 2.0.9) Server Comment --------- ------- IXDP425 Samba 2.0.9 MOBILE Workgroup Master --------- ------- HOME IXDP425 My server is an Intel Arm Xscale based on Snapgears uC-Linux with Glibc 2.2.5 I'm running the Intel Access Library Version 1.3 and Kernel Version 2.4.20 My smb.conf is as following simple >>snip [global] workgroup=OFFICE encrypt passwords=yes netbios name=ixdp425 preferred master = yes local master = yes domain master =...

I''m rate limiting and prioritizing traffic upstream of a slow wan link using htb, classic wonder shaper type stuff. I''m using the following command for traffic that does not match any of my defined filters: tc qdisc add dev eth0 root handle 1: htb default 50 It appears that local, non-routable traffic like arps and igmp are being snared by this and end-up queued in the lowest

Hi, i have one firewall/gateway server with two interfaces and a routing problem (?). eth0: external interface eth1: internal interface. Both ip address are valid. Services like DNS, HTTP is configured to run using eth1 ip address. The problem is when i try to connect from internet to firewall, i can´t see eth1 ip address... only eth0 ip address. So, when i try to connect to web

Hello again, I may have a common problem to solve but it seems it is harder than I thought... I have 2 internet providers (each one having a different gateway). Behind the router there are around 100 clients that are SNAT-ed. I want some clients to be SNAT-ed to the first provider, while the others to the second one. The following lines should work: iptables -t nat -A POSTROUTING -s

Hi all, Does anyone else use the SG560 firewall with Asterisk? I do, and it normally works great, except when it randomly reboots. Has anyone else experienced this annoyance? Did you fix it? - Mike

hello, i have 2 links to the ISP of 128kbit each, and i want to balance the trafic between them, but not staticly (local ip1-5 throw isp1, and the rest to isp2). I though at a ingress clasification, then routing by the mark, and at the exit nat (yes i must do nat :(((, but the clasification must be flow based, and i dont know how to do it. C _______________________________________________ LARTC

Hi all Does anyone know if i can use ethernet aliases like eth0:1 in advanced routing like multipath routing in order to avoid to have nxEthernet interfaces in my Linux box. Thansk in advanced -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi, I am new to this group. I use this script tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1:0 classid 1:1 htb rate 500kbit ceil 500kbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 300Kbit ceil 500kbit tc class add dev eth0 parent 1:1 classid 1:3 htb rate 200kbit ceil 500kbit I like to know: If two customers of the same class (for example 1:2) work

...t on ipsec0 + eth0 devices for shaping ? and lastly, any difference between the IMQ implementation on 2.4, and that on 2.6 ? Are they both still being developed ? thanks, -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Lin...

Hello all, Im new using tc, ive been reading the howto at least 2 or 3 times, but there''s a lot information to aquire all of it quickly. I''ve installed a linux box as firewall for a wireless Network in a hotel, this box is a radius for the access points and it uses iptables to redirect and permit/deny the customers to use the net. So it uses iptables to count the bytes to

Hi all, Given below ia the simple network diagram. I need to control uplink for the individual private network IPs as depicted in the diagram. Is this possible in a NATed environment using CBQ or HTB. I learnt that we can control only outgoing traffic. So if I control in the eth1 interface the source IP will be masqueraded, and it may not result in the desired behaviour. Is there a solution to

How can I advertise a free software that is associated to the linux qdiscs (more particularly htb). The soft does not seem to have impressed google, it is at http://www.rawsoft.org If you work on htb and are used to compiling modules, then you should try it. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc

Hi all! I just started to experiment with bandwidth management using tbf. I have the folowing problems with token understanding: 1) What unit is token? Is "1 token = 1 byte" ? If this is so, then with rate=0.5mbit and HZ=100 the bucket gets filled with 0,64kb (655 tokens) every 10ms? 2) How much tokens are used for one packet (1500)? 3) And token unrelated question. Does

Hi, I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense? thx cb _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/