search for: smy

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

George, since you asked on Friday, I though about the situation some more over the weekend. On PV, the requirement to trap all INs and OUTs is a result from us needing the enforce two levels of restrictions - Xen''s and the guest kernel''s. I.e. we can''t make use of the hardware''s access control mechanisms, as we can''t put two I/O bit maps in place, and

Dear All, I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address Server 2 : 192.168.13.179 IP Address Floating : 192.168.13.83 IP Address (Assumed by currently active server) I want all snmp packets going out through the active server to be stamped with floating IP So i have added a iptables rules as "iptables -t nat -A POSTROUTING -p udp -s

Update nouveau to only use the mmu interval notifiers. Signed-off-by: Ralph Campbell <rcampbell at nvidia.com> --- drivers/gpu/drm/nouveau/nouveau_svm.c | 313 +++++++++++++++++--------- 1 file changed, 201 insertions(+), 112 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c index df9bf1fd1bc0..0343e48d41d7 100644 ---

R 2.2.0 windows XP I am beginning to explore the mitools package contributed by Thomas Lumley (thank you Thomas) and I have a few questions: (1) In the examples given in the mitools documentation, the only family argument used is family=binomial. Does the package support family=gaussian and other link functions? I ran the with function with family=gaussian and I obtained results, but I am not

I have been testing the performance of zfs vs. ufs using filebench. The setup is a v240, 4GB RAM, 2 at 1503MHz, 1 320GB _SAN_ attached LUN, and using a ZFS mirrored root disk. Our SAN is a top notch NVRAM based SAN. There are lots of discussions using ZFS with SAN based storage.. and it seems ZFS is designed to perform best with dumb disk (JBODs). The test I ran support this observation.. and

Hello, I have the same error, server is auto rebooted during every boot with kernel XEN, HS20 with Debian Wheezy and XEN hang on and AMM managment show same errors described in previous mails. With Debian wheezy wit non-xen kernel boots correcte, it seems that problems is with xen kernel Same Server HS20 with Debian Lenny+ XEN 3.2 or Debian Squeeze+XEN 4.0 working perfect Upgraded to Debian

All, my apologies in advance for the wide distribution - it was recommended that I contact these aliases but if there is a more appropriate one, please let me know... I have received the following EFI disk-related questions from the EMC PowerPath team who would like to provide more complete support for EFI disks on Sun platforms... I would appreciate help in answering these questions...

Hi List! I am using the latest version of prototype.js from the SVN, including the wonderful $$ operator to loop through a number of elements with a certain classname. In Firefox everything works fine, no JS error, but in IE I get an error in the .each function saying that an Object was expected. What I do is function initializePlugins() { $$(".plugin").each(function(plugin) {

clear_IO_APIC_pin() ignores entries that are set to delivery mode SMI. While this seems reasonable if the entry was unmasked, I consider it dubious for masked entries. In Linux, such behavior is benign since when the entry later is being used for some normal interrupt, the old setting is simply overwritten. In Xen, however, ioapic_guest_write() uses the vector field to determine the previous

For Solaris 10 5/09... There are supposed to be performance improvements if you create a zpool on a full disk, such as one with an EFI label. Does the same apply if the full disk is used with an SMI label, which is required to boot? I am trying to determine the trade-off, if any, of having a single rpool on cXtYd0s2, if I can even do that, and improved performance compared to having two

Use smp_call_on_cpu() to raise SMI on cpu 0. Make call secure by adding get_online_cpus() to avoid e.g. suspend resume cycles in between. Signed-off-by: Juergen Gross <jgross at suse.com> --- V4: add call to get_online_cpus() --- drivers/firmware/dcdbas.c | 51 ++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 25 deletions(-) diff --git

I''m not sure if this alias is only to discuss the Solaris ZFS implementation or others. I''m writing my own ZFS code from scratch in Java. I''ll skip the reasons why I''m doing this in Java, lets just assume I have some. Is there any good documentation on the disk label structures? Right now my code is just reading the ZFS labels and the nvlist data but when

Dear R friends, I know that this topic has been mulled over before, and that there is a substantial difference between the convergence criteria for JMP and those for R. I apologize that this is somwehat raking cold coals. Summary: A model/data combination achieves convergence in JMP, and survives a reasonably rigorous examination (sensible parameter estimates, well-behaved surface,

Dear ZFS experts, I have 2 SATA 500 GB Hard Drive on my Dual Core PC I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore Now, using all the guidelines I got here at Indiana Discussion, I can''t attach my second drive to rpool to make them mirror Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally

I need some help with the following: My system hangs while booting from a CD using?SysLinux?(2.08).? I think that the?driver?hooks into the INT13 and INT15 handlers, writing their new handler hook into the Extended BIOS Data Area (EBDA) used by Phoenix BIOS for BIOS data information.? This area is?used and modified during legacy USB SMI's. I think that the hang happens because the new handler

Hi folks, I have five imputed data sets and would like to apply the same recoding routines to each. I could do this sort of thing pretty easily in Stata using MIM, but I've decided to go cold turkey on other stats packages as a incentive for learning more about R. Most of the recoding is for nominal variables, like race, religion, urbanicity, and the like. So, for example, to recode race

Hello, Experts. I''ve got a problem. I''m trying to expand my main zpool (rpool), but don''t know how to do that. (i''m 100% newbie in non-windows world) I use Osol under Vmware on Windows. I had a pretty small vhdd -> only 12gb. Yesterday i decided to expand my virtual drive to 20gb. (After several tries to upgrade the OS to a newest dev-releases and

Couple of little things I noticed with a new RELENG_7 AMD64 box (as of yesterday) ifstat from the ports cannot seem to find interfaces for some reason ? It works fine on i386 [ns8]# ifstat -b ifstat: no interfaces to monitor! [ns8]# [ns8]# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500