search for: sm56

The SM56 MODEM manual says it does. But when used with zaptel 1.2.12, nothing shows up. Yuan Liu

Hi, I'm cutting my teeth setting up a home asterisk server, but having some trouble getting Zaptel to recognize a X100P clone PCI (Motorola SM56 which should work according to various wiki's). What struck me was that the "/proc/interrupts" do not include IRQ 11 as the "lpcpi -v" is reporting. Am I missing something fundamental here? Any hint is greatly appreciated. /Poul # ztcfg -v Zaptel Configuration =======...

Hardware is an SM56 card (X100P clone). When the line hangs up, ztmonitor displays full bar (or whatever maximum allowed by rxgain) in RX. It only drops zero when the line picks up (and remote was silent). Is this something of concern? The zap channel seems to work despite echo. Additionally, what's the ob...

Hi, Anybody lucky with this config inside an Asterisk server for dealing with FAX ? FXO_LINE ----> ASTERISK 1.4.2 ---> IAXMODEM ------> HYLAFAX TDM400P ZAPTEL 4.3.1 1 FXO port 1.41 ------------------------------------------------------------------------ I know Fax is not officially supported on TDM400P cards but I did not expect not being able of sending one

...ile is as listed in the extensions.conf. I know this system works, but what is the matter with GSM on ISA modems? Do I just have the wrong equipment? I know there are better pieces of equipment that are made for this, but what can I do for now with everyday voice modems? Should I try a motorola sm56 voice soft modem? What are the compliances I am not seeing that are necessary to play gsm over the voice modem? Thanks -- Jordan In a world without windows, who needs gates?

My SM56 (Motorola X100P clone) has echo as hight as 38%, according to fxotune -d. But when trying to take action, it fxotune simply says it can't. ./fxotune -i3 -vvvv Running with parameters: doset=0 docalibrate=1 dodump=0 startdev=1 stopdev=252 calib...

Hi everyone, I am running X-Plane under wine, but the joystick input is ignored. Is there anything special I need to do in the wine setup to have the joystick recognized. My joystick is a USB Logitech Wingman Extreme 3D, and it works normally under other Linux applications. Richard -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the 1057 Motorola Chip, and I installed it on my linux box. in my /proc/pci list it is recognized like 1057:3052 (Motorola) (rev 4)., IRQ 11,...

So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel 2.6.16.16. Everything has been fine up until now. I compile the 1.2.5 Zaptel drivers without a problem, get the udev configuration in, modprobe zaptel, and finally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel