search for: sls

Hello, I have queues.conf setup with a group like so: [Sales](StandardQueue) announce = first member => SIP/FF4C119EEBF8-SLS member => SIP/FF9EF375CCFC-SLS member => SIP/13145555555 at callcentric ;Eric's cell member => SIP/FF1565AABB2D-SLS ;Eric's Yealink So, my idea here that it should ring all 4 phones at the same time. And it does work but randomly.I did trace a call and this is what I see. Only 2 ph...

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server. This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link l5, schannel 1, sls 1, INSERVICE, rx: 5, tx: 3/3, sentseq/lastack: 95/95, total 4030833616, 4028245568 ^[[A[root at localhost ~]# asterisk -rx "ss7 link status" linkset siuc, link l1,...

Sorry for the frantic nature of this message, but we need to allow pings on our firewall so our ISP can test things. I''ve done this, and it still doesn''t work: (I am now at v.2.0.10) rules: AllowPing net fw AllowPing sls fw show indicates some matches, so where are they? Chain AllowPing (4 references) pkts bytes target prot opt in out source destination 1144 70108 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 Clearly I am missing something...

....10 config files. Most things seem to work fine, except for our masq entries. I''ve examined the default 2.0.10 files compared with our 1.4 files, and can''t spot the problem. What am I missing? Here''s the revelant info (I think): zones: net Net Internet sls sls SLS network interfaces: sls eth0 detect routefilter net eth1 detect routefilter,tcpflags shorewall.conf: ADD_IP_ALIASES=Yes ADD_SNAT_ALIASES=No masq: eth1 10.2.200.0/24 - eth1 139.142.66.4/32 139.142.65.146 eth1 10.2.250.0/24 139.142.65.146 eth1 10.2.2...

...but Samba won't show it. Clearly I'm missing a vital piece somewhere, but I'm not sure where. This is the first machine with 2.6 kernel (stock kernel so far)... could that be the issue? -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server with Digium E1 cards ( 4 port cards). This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link l5, schannel 1, sls 1, INSERVICE, rx: 5, tx: 3/3, sentseq/lastack: 95/95, total 4030833616, 4028245568 ^[[A[root at localhost ~]# asterisk -rx "ss7 link status" linkset siuc, link l1,...

...on you said you were running. If I wanted to add a LOCAL channel to my queue I'd do it as member => LOCAL/7124 at kiniston-intern,0,John,hint:7124 at kiniston-intern On Thu, Nov 15, 2018 at 2:38 PM Ivan Demkovitch <idemkovitch at yahoo.com> wrote: > John, > > FF1565AABB2D-SLS is probably invalid because it's not registered/lost > registration. This client is connected via VPN to our network, it usually > works when it's "warm". Not concerned about it too much. > > 15555555555 at callcentric OTOH is an actual cell phone that should be > d...

Dear R-helpers, Lists in R are stumbling block for me. I kindly ask you to help me able to write a data-frame. I have a list of lists. > sls[1:2] $Andromeda_maya1 x y [1,] 369 103 [2,] 382 265 [3,] 317 471 [4,] 169 465 [5,] 577 333 $Andromeda_maya2 x y [1,] 173 507 [2,] 540 395 [3,] 268 143 [4,] 346 175 [5,] 489 91 I want to be able to write a data.frame like the following: X Y Name 369 103 Andromeda_m...

...this before. Are there any known issues with SMP hardware and the 2.4.22-10 kernel? That seems to be one common link between the two systems suffering lockup. Thanks for any assistance you can provide. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...one... how do I make the printers share go away? I have no printers, and no [printers] section. I tried adding one, and making it browseable=no, but it still appears. This is on v 3.0.11 and 3.0.14a -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...link or faster, please let me know, on or off list. I just hate not knowing what is causing our problems, and having them occur on a new, fast firewall would probably push me over the edge.... Thanks. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...if the dns lookup fails? Just wondering if someone has a creative solution to the problem. Otherwise, I''ll probably just convert the names to IPs by hand, then list the names in a comment. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...since our peak ip_conntrack value is around 2000. Speed of the hardware shouldn''t be an issue either, as neither machine sees a load avg much over 0.01. Thanks for any insight you can offer. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, I.T. Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...copy /d to refresh any modified files. In this case we will use a tape backup/restore to handle the modified files, but it would be nice to know if xcopy can be made to work with samba in this way? -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Shawn Wright, Systems Manager Shawnigan Lake School http://www.sls.bc.ca swright@sls.bc.ca

...ese sending NTP requests to the firewall, which is running ntpd. It didn''t complain about these before, so I''m not sure why it does now. Is there something about the use of the "zero" subnets it doesn''t like? I have this rule to allow UDP port 123: ACCEPT sls fw udp 123 - A portion of my shorewall show status is below (the full output is in a previous message re: AllowPing). There are no hits for UDP 123 coming from 10.0.0.x, probably because they are seen as martians. Chain sls2fw (1 references) pkts bytes target prot opt in...

If you can see the server, but not shares, you most likely have not published any directories. What version of the BE agent are you using? I've noticed 4.6 works well (the install actually works well and will walk you through the setup to publish the directories to be backed up). It's often easier to just publish root (but exclude /proc /tmp). Also, I've found out that in the hosts

...mes, level = 0, ...) { polygon <- sapply(fileNames, loadChangePrefix, level) polyMap <- do.call("rbind", polygon) polyMap } spdf <- getCountries(c("ITA","CHE","FRA", "DEU","BEL", "LUX")) AP <- c("SLS","SLS", "NWS", "NSLS", "NSLS", "NWS") spdf$AP <- as.factor(AP) png("many-countries.png") ## print(spplot(spdf, "NAME_ENGLI")) print(spplot(spdf, "AP")) ## plot(spdf) dev.off()

Hello, I am stumped on a problem I am having with Shorewall 2.0.1 on Mandrake 10. My setup is as follows. I have a /28 and have assiigned all ip addresses to my firewall using aliases. I am able to setup rules to allow specific traffic to specfic ip addresses on the firewall like so: ACCEPT net:w.x.y.z $FW:w.x.y.z tcp 22 This works great for TCP and UDP traffic. I can

Hi to all. I would to ask if there''s way in shorewall that I can be able to check my bandwidth, if im really getting what I paid for. Second, Is there a fast and effective way to implement traffic shaping with shorewall. Many thanks Jan --------------------------------- Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now

A colleague just wrote and said he's had a problem with Samba using a Cascade ("SLS") PDC. This is odd, as Jeremy tested that rather recently! The symptom reported was, with security = domain and password server = <the SLS server>: > . When I try to validate > a login on the samba box against the SLS SAM, I receive...