search for: singal

Hi, I'm working with custom slides(Cy5) and working in the normalization of the arrays. I have three arrays (technical replicates). I have sucesfully normalized the data using vsn, however i would like to normalize using spike in controls. My controls are annotated as CTL-1 to x and i would like to do etiher a normalization by block per array or the mean of all the controls per array. The gal

hi: our company want to use samba3+openldap with singal sign on. we have several branches.people would travel arround head quarter and branches with their notebooks. so we don't have roaming users, but we do have roaming computers. we want to use a single domain for every site, and we want every site keep working even when wan link is...

How I change my configuration to reduce this issue. I have this setting on my zapata.conf signalling=fxs_ks group=1 callgroup=1 pickupgroup=1 channel=1 signalling=fxs_ks group=2 callgroup=1 pickupgroup=1 channel=2; singalling=fxs_ks group=3 callgroup=1 pickupgroup=1 channel=3; singalling=fxs_ks group=4 callgroup=1 pickupgroup=1 channel=4 and for outbound calls I have this context on my extensions.conf [out-callb] exten => 44,1,Set(LANGUAGE()=es) exten => 44,n,ChanIsAvail(Zap/g1&Zap/g2&Zap/g3&Z...

Dear all I have asterisk 1.2 and now i want to install E1 card with support Q.SIG singaling so which E1 card is best for my setup i need single port E1/PRI card which support Q.SIG Regards Satish patel --------------------------------- Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. -------------- next part...

...n=3.0 callgroup=1 pickupgroup=1 immediate=no ;busydetect=yes ;busycount=4 callprogress=no ;busypattern=500,500 ;answeronpolarityswitch=yes ;hanguponpolarityswitch=yes ;callprogress=yes faxdetect=incoming faxdetect=outgoing signalling=fxs_ks group=1 channel=1 signalling=fxs_ks group=2 channel=2; singalling=fxs_ks group=3 channel=3; ;singalling=fxs_ks ;group=1 ;channel=4

...w to make voip more stable. MG3000-R could detect the voip quanlity, when voip line failed, it change to pstn line automaticly. 3. pstn caller number transfer. When pstn call in, the mg3000-R start voip call to the asterisk using pstn caller number instead of gateway number. 4. multy region pstn singal support. By using MindSpeed technology, it integrated many region's pstn singal. Why we choose a voip fxo gateway while not a asterisk card. 1. voice process is a realtime task. PC operate system is not a realtime one. Voip gateway use its own dsp to do voice process while as...

...as expected. because i don't want R to run in an own thread and my app should keep the control i want to use repldlldo1. within the readconsole as long as i copy commandlines containing valid R commands function to R's buffer all things are fine. but when i copy a non valid command, R singals segfault after passing the error message, that the given object is not valid. this happens in call to eval(R_CurrentExpr, rho) in repldlldo1. i tried to comapare both ways (mainloop vs. repldlldo+repldllinit) but actually cannot find a significant difference. can anyone please help me with thi...

...hat will allow folks to map a shared drive from their Windows 10 machines generally fine, but quite regularly throws a bunch of errors to the log.smbd file with stuff like the following: *** stack smashing detected ***; /usr/sbin/smbd terminated ../lib/util/fault.c:79(fault report) INTERNAL ERROR: singal 11 in pid ..... Please read the Trouble-Shooting section of the Samba HOWTO These error messages have not proven to be very helpful, and I regularly get called in off-hours because users suddenly lose the ability to map to said share. I've tried googling the heck out of the various cryptic er...

...en device? That's to say, with my current code for ploting on screen device, how to modify a few lines to send automatically the plots to the printer? If that's not doable in R, could it be possible to automatically generate a multi-page PDF file for all the plots, so that I can print one singal PDF file to the printer manually later? thanks a lot! [[alternative HTML version deleted]]

...the system complains with: /: recovering journal JFS DEBUG: (recovery.c, 254): journal_recover: JFS: recovery, exit status 0, recovered transactions 1 to 4 JFS DEBUG: (recovery.c, 256): journal_recover: JFS: Replayed 16 and revoked 0/0 blockes Warning... fsck.ext3 for device /dev/hda5 exited with singal 11. fsck.ext3: Bad magic number in super-block while trying to re-open / when booting up. This is followed by a slew of really ugly stuff, like programs not being found etc. So the question is, what to do? Grin and bear it for now or is there a solution that makes the first boot more elegant?...

Hi list! I have some strange problems with Asterisk 1.0.5-BRIstuffed-0.2.0-RC5. Very regularly asterisk seems to lose connectivity with the ISDN line. If you try to call in you get the information tone that the number is not in use. Outbound calls do stil work however. Unloading the modules and reloading them and start/stop asterisk will solve the problem. Another problem that occurs

...r to do its part and HUP/CONT its process groups. This part is not too clear because Uresh Vahalia mentions this very much in passing on page 108 of "Unix Internals." It is unclear whether closing a pty master causes the pty slave driver to take any action, whether sending singals to any processes or revoking any open file descriptors, when the session process is alive or dead at the time that the master is closed. This can be determined experimentally. Ideally closing the pty master after the pty slave's session leader has exited will cause the pty slave dr...

...shared drive from their > Windows 10 machines generally fine, but quite regularly throws a > bunch of errors to the log.smbd file with stuff like the following: > > *** stack smashing detected ***; /usr/sbin/smbd terminated > ../lib/util/fault.c:79(fault report) > INTERNAL ERROR: singal 11 in pid ..... > Please read the Trouble-Shooting section of the Samba HOWTO > > These error messages have not proven to be very helpful, and I > regularly get called in off-hours because users suddenly lose the > ability to map to said share. I've tried googling the heck out...

Hi, I have problems with Asterisk recognizing dtmf tones sent by Mediatrix 1104 FXS. I can not enter mailbox number (voicemail) or pin code (meet-me). Asterisk shows 'username not entered' when dialing in voicemail. Both asterisk and Mediatrix have set inband dtmf. Can anyone help me out ? Best regards, Dave

Hi, I'm recording wave files but I cant get Asterisk to play them, only if they are in 8000 Hz. What is the maximum sample rate Asterisk can handle? I have been using 16-bit 44.1, 22050 and finally 8000 kHz. Many thanks, Christian

...with mediant 2000 with avaya now i want to install E1/PRI card with asterisk and trunk with E1 with Avaya E1 port so i want to buy E1 card for asterisk so which card is best and cast effective for my setup i want 1 port E1 card so can you suggest me which card is best for my setup and i want QSIG singaling with avaya Regards satish patel --------------------------------- Got a little couch potato? Check out fun summer activities for kids. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/200707...

...h TDM808B FXO port with i call in asterisk and i promt IVR then user dial extention for user then my SIP phone rining but i disconnect or hangup my mobile phone but still SIP phone rining and stop rining after timeout is there any PSTN problme or FXO signalling problme i have configuraed singalling=fxs_ks ----PGP Signature-- Satish Patel mobile:- +91-9818875535 http://www.linuxbug.org --------------------------------- Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. -------------- next part -------------- An HTML attachment was scrubbed... URL...

...DAHDI/26-1* */var/log/asterisk/messages:[Mar 12 07:47:17] WARNING[26421] chan_dahdi.c: Unable to start PBX on CIC 26* Is a very simple PBX which receives the calls in SS7 and redirects them (via IAX2 trunk) to another Asterisk which is connected to an avaya PBX using the same hardware but with PRI singaling. -- Camilo A. Echeverry J. 301 7553789 --------------------------------- Y todo lo que hag?is, hacedlo de coraz?n, como para el Se?or y no para los hombres. Colonences 3:23 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/...

Hi, I am tryinig to work on the Mongrel examples. I am trying to modify the HttpResponse. def process(request, response) response.start do |head,out| if request.params["REQUEST_METHOD"] == OPTIONS" else end end One can detect that the request is OPTIONS like this, but how does one generate the custom response by using HttpResponse. Please help. Shubham

Hi, Running 1.4.26.1 here. I have installed TE420B card in my server, and followed the appropriate steps (as far as I know to configure it). This TE420B is connected to a CLEC (T1s), so I am using pri_cpe as singalling type. When I dial out, I get this message: Dec 4 11:37:31] WARNING[27983]: app_dial.c:1275 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) I am using Dial(DHDI/g63/5555555555|20) in my dialplan. Anyone who has a tip, I would appreciate. I...