search for: shorelinecontain

Hello everybody I am trying to connect my asterisk to a payment equipment trough PSTN. I have a TDM400P card with an fxs module an the equipment use modem to send data! I was thinking to implement a software data modem in asterisk, but I found out that there is just faxmodem for asterisk, Is anyone here know something about software data modem working with asterisk to help out? Thanks,

Not sure if Polycom is changing their policy or if this is an accident, but you can actually download SIP 3.1.1 right from their web site. Anyone looking for firmware should get it now before it disappears. SIP app and release notes can be found here: http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip450.html -Dave

Hello all, I have two machines I'm connecting with TDMOE (dahdi dynamic spans) and I have a question about timing parameters. By my understanding one machine should be the source of the timing and the other a slave of that timing. So on machine A I have the following in system.conf: dynamic=eth,eth0/00:0C:29:55:89:7E,24,0 On machine B I have this is system.conf:

Hello all, I'm setting up a couple of test boxes and I'm running into a problem. What I need help with is determining whether I'm going something wrong or if I need to post a bug report. I have two asterisk 13.0-beta 3 machines set up with extensions connected to each as such: 3700 ----> AST-A <------> AST-B <---- 3800 & 3801 When I place a call from 3800 to

Hey All, AT&T is installing a PRI in a couple weeks and while I've been doing homework on PRI's for the last few weeks there's something I'm still confused about. After being asked how many digits I wanted them to send us (10) was how many digits will you outpulse to us, 4, 7 or 10? I asked her what that meant and all I got was the question repeated. Do any of you have

...jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir ------------------------------ Message: 3 Date: Wed, 20 May 2009 17:12:04 -0400 From: Dave Fullerton <dfullertasterisk at shorelinecontainer.com> Subject: Re: [asterisk-users] Channels configuration with DAHDI To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Message-ID: <4A147224.6060302 at shorelinecontainer.com> Content-Type: text/plain; charset=UTF-8; format=flowed Da...

Since we've had discussion about DST on polycom I thought I'd pass along the rule I used to configure DST on my sipura units as well (This way the date and time passed in caller ID will be correct). Under the admin view go to the regional tab. At the bottom under miscellaneous enter this in "Daylight Saving Time Rule:" start=3/8/7/2:0:0;end=11/1/7/2:0:0;save=1 This is based

Hello all. I have Asterisk connected to an Adit 600 channel bank with a TE110P and the channel bank is connected to a PBX providing dialtone to the PBX with fxo_ks signalling. When a call between the PBX and Asterisk completes there is a momentary battery drop/reversal or something that signals the PBX that the other side has hung up and then the PBX hangs up. This all works fine. However,

Hello list, I wondered if those of you using Polycom phones could recommend a decent cord detangler. I've had quite a few handsets get the tabs broken off in the jack from cord detanglers due to the recessed nature of the jack. This seems like it would work but I wanted some opinions before I go buy some: http://www.voiplink.com/Extended_Handset_Cord_Detangler_p/detangler-e.htm I

Hello all, I'm running into an issue with Asterisk 12.4 and IMAP voicemail. I have asterisk set up to connect to my Dovecot IMAP server and I can leave and retrieve messages from my inbox and old messages. However, I am unable to move messages between folders. I get a message from asterisk stating "Sorry the users mailbox can't accept more messages". Here is my setup: In

Greetings. I have a scenario I would like some advice on. I have a 100,000 square foot building that we will be moving some work crews into. It has offices on each end of the building and a fiber line between them. I currently have an asterisk 1.2 system in place and about 30 phones. My problem is they want a few fax machines out in the warehouse area where I currently have no wiring for

Not sure how I should officially report this, but I'm getting a compile error with DAHDI-linux 2.7 when I define CONFIG_DAHDI_NET in include/dahdi/dahdi_config.h. I am able to compile successfully when I leave it undefined, but I need to be able to use the network support. <snipped> /oct6100_api/oct6100_tsst.o AR /tmp/dahdi-linux-2.7.0-net/drivers/dahdi/oct612x/lib.a

Hello All, I'm trying to connect Asterisk to an Executone phone system with an analog DID card and I'm hoping someone can help me figure out what I'm doing wrong. The Executone DID card provides battery to the telco, when the telco wishes to dial a DID it goes off-hook, waits for a wink from the Executone and then dials the last three digits on the number with pulse (as opposed

Greetings, I'm using asterisk to connect our three locations together with a sort of inter-company auto attendant connected like this: PBX (fxs) <-> Sipura 3k (fxo) <-> Asterisk <-IAX-> remote asterisk It works like this: Person picks up their phone and dials a number to get to the auto attendant (I don't have any FXO ports available on our PBX to do it the