search for: shined

Hi Guys, 2012/7/20 juantello <juantello1234 at gmail.com>: > > Hello. > > Icecast client for android > http://droidtools.sourceforge.net/content/icecast-client-android > http://droidtools.sourceforge.net/content/libogglibvorbis-and-libshout-libraries-android I just finished compiling an android version of our reshaped shine encoder [1] there:

While keeping up-to-date the nouveau mesa driver (either classic or gallium), or doing regression testing, the big majority of my rebuilds resulted in segfaults. I am not talking about autogen or configure detection. I believe this also works automatically in other projects and doesn't with mesa, but forgetting to do this usually causes a build failure. Then autogen/configure can be run and

Is it possible to use sync to vblank / swap control with mesa/gallium (and nouveau) ? I googled it but did not find any clear answers about how it is supposed to be enabled. I also tried to read the code, and I am getting lost. So I didn't find any answers to any of these questions : 1) how are we supposed to enable it ? is there an env var , or ~/.drirc ? is drirc/driconf still valid with

12:08 < curro_> shining: hmm, it seems, darktama didn't quite finish the additional reloc checking he started to code 12:11 < curro_> shining: that would have solved your problem, poke him when he's back from vacations :) 12:16 < shining> curro_: hmm I really dont get it, it looks like domain can have both set, and flags can also have both set 12:16 < shining> I

7.8 branch (533b7663) : 209/246 master branch (c882c31) : 216/241 In short : 8 fail/warn -> pass 5 fail -> skip 1 pass -> fail So the only regression is glean/clipFlat Output: ---------------------------------------------------------------------- Test clipping with flat shading (provoking vertex). clipFlat: Failure for glBegin/End(GL_QUADS), glFrontFace(GL_CCW) GL_EXT_provoking_vertex

I want to set value for a vectortype. It is a global variable, it contains several basic type, like float. If can set value element by element, it is better. -- Shining(史宁) Changchun, Jilin, China -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20130806/706a13b1/attachment.html>

Hi all, 2012/8/21 Romain Beauxis <toots at rastageeks.org>: > Hi Guys, > > 2012/7/20 juantello <juantello1234 at gmail.com>: >> >> Hello. >> >> Icecast client for android >> http://droidtools.sourceforge.net/content/icecast-client-android >> http://droidtools.sourceforge.net/content/libogglibvorbis-and-libshout-libraries-android > > I

Hi just saw this today :a real icecast client on android ! Seems to have been published on november 2012 : https://play.google.com/store/apps/details?id=sa.broadcastmyself <-----------------------------------------------------------------------------------------------------------> web perso : http://memeteau.org <xmpp%3Afreechelmi at jabber.fr> 2012/8/24 Romain Beauxis

Hi everybody. Any development on this? Andrea Thomas.Rucker wrote: > > He's asking for a SOURCE client, not a _listener_ client. > > I don't think such a thing exists at the moment. > > > TBR > > -- View this message in context: http://old.nabble.com/Any-android-source-client-for-icecast---tp30375352p33700728.html Sent from the Icecast - General

Dear R-experts, I'm looking for an easy possibility for pattern search. I have got a string and a special pattern. I would like to know if the pattern appears in the string, if yes where does it appear (position) and the number of appearance. Example: Text = c("If the sun shines, no clouds should be seen in the sky!") SearchPattern = c("the") NumberOfAppearance = 0

Hi. I have installed B410P in Europe and the cards works more or less ok. My question is what color should the LED's on the back of the card be when connected to the PSTN NT box? Is there anywhere some information on the expected LED color in any given state (idle, call active, cord unplugged etc.)? On my card the lights are shining Red(orange-ish) but flashing to green every now and

in nv10_exa.c : check_texture does : if (w > 2046 || h > 2046) NOUVEAU_FALLBACK("picture too large, %dx%d\n", w, h); check_render_target does : if (w > 4096 || h > 4096) return FALSE; So we have different size limits for the source and the destination ? Another thing is that nv20 uses nv10_exa.c code, and the limit in

While I have concentrated on support for 2.6 native IPSEC in release 2.2.0, I am still of the opinion that unless you absolutely need IPSEC compatibility that OpenVPN is a much easier (and in the case of roadwarriors, a much better) solution. Having already generated all of the required X.509 certificates, it took me less than 1/2 hr to replace my IPSEC testbed with an OpenVPN one using the new

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

I need decide on if our site will go with Java or Ruby on Rails. The major factor is that does Farret support Lucene''s ChineseAnalyzer or CJKAnalyzer or not. Can anyboby shine some lights on Farret''s Chinese search support? Really appreciate. -- Posted via http://www.ruby-forum.com/.

Hi everyone, I'm currently running Centos 4 server with apache and mysql. My HP 4250dtn is connected to this server via JetDirect card. IP for HP printer is 192.168.1.100 IP for Centos 4 is 192.168.1.200 My question is how to enable the printer so that user can connect & print via http like http://192.168.1.100/printer I don't know if this is possible, but i'm sure somebody

Hello all, After a prolonged labour with a few re-issues of the tag and many pushes during the day, NUT v2.8.2 was found in a strange egg by a bunny hopping away from the April fools. All that - blessed under the shine of Polar lights in the middle of the icy North Ocean. A python module was released but slipped away with an earlier commit. Other artifacts should follow shortly. Jim Klimov

Hello all, After a prolonged labour with a few re-issues of the tag and many pushes during the day, NUT v2.8.2 was found in a strange egg by a bunny hopping away from the April fools. All that - blessed under the shine of Polar lights in the middle of the icy North Ocean. A python module was released but slipped away with an earlier commit. Other artifacts should follow shortly. Jim Klimov

Hello everybody, I am doing a plot and I would like to know which parameter I have to use in order to get an equal scale for the axes x and y: Means, if the intervals in the x-axis is 0,5,10,15.... I would like to have the same scale for the y-axis. Thank you so much for your help. Halima from Leiden where the sun is shining. Holland

Vorbis, using the AoTuV beta4.51 encoder, come first in a "Public, Multiformat Listening Test @ 128 kbps" organized on Hydrogenaudio forum. Hydrogenaudio thread: http://www.hydrogenaudio.org/forums/index.php?showtopic=40607 Presentation: http://www.maresweb.de/listening-tests/mf-128-1/ Results: http://www.maresweb.de/listening-tests/mf-128-1/results.htm