search for: setting_up_samba_as_a_print_server

...drivers. ( see wiki ) Are you using spoolss or spoolssd ? > Yes, I know WHERE it happens but not WHY... I need to know why so I can > do something about it. Then provide the asked information, then i can help, without i can not. And i hoop you did read : https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Åke Holmlund via > samba > Verzonden: woensdag 22 maart 2017 13:4...

...e >> samba wiki, here is my problem. I want to setup a print server for >> windows client with a cups backend where for now one printer run. >> > >> So.. what do I miss ???? > > Possibly this page on the the Samba wiki: > > https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server I’ve read it, applied it… does not work for me…. f.g. — Frédéric Goudal, Ingénieur Système Bordeaux-INP frederic.goudal at bordeaux-inp.fr +33 5 56 84 23 11

...g = CUPS The other parameters in your [printers] section are either not necessary or default. I don't see any problem in your smb.conf. However, just for testing purposes: Can you disable automatic printer sharing and manually share one of the printers? See: https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server#Disabling_the_Automatic_Printer_Sharing https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server#Manual_Sharing_of_Printers Regards, Marc

...I have seen on Wiki that samba 4.7 print server is package-aware: https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients To use package-aware drivers: - Run Samba 4.7 and later - Enable the spoolssd service Also in https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server Support package-aware Windows drivers. I upgraded my samba print server from 4.6.5 -> 4.7.4 (spoolssd was already enabled) and I uploaded new driver but printmanagement.msc is always showing packaged: false) Also, in 4.7.x changelog, there is no mention about print changes. Is package-aw...

...le = yes    writable = yes    guest ok = no   [printers]    comment = All Printers    path = /home/samba/printing/spool    acl_xattr:ignore system acl = yes    browseable = yes    printable = yes    printing = CUPS   after setting this, go here : check https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server#Granting_the_SePrintOperatorPrivilege_Privilege then  https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients   goto : Setting up the [print$] Share Using Windows ACLs: Apply that part.   Try again.   Or give more info, without it, its imposs...

https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server#Supported_Print_Server_Back_Ends Did you: # net rpc rights grant "SAMDOM\Domain Admins" SePrintOperatorPrivilege -U "SAMDOM\administrator" Greetings Daniel -----Urspr?ngliche Nachricht----- Von: Rowland penny via samba [mailto:samba at lists.samba.org] Gesendet: Donnerstag...

Hello, After digging for hours in different web site, read several times the samba wiki, here is my problem. I want to setup a print server for windows client with a cups backend where for now one printer run. I have setup my linux host as a member of my domain. I can use smbclient with both a user login/password or the Admin one and logon is accepted. But… I can’t see my printers in share… when

Hi Marc. > It sounds like the problem that came up last summer, after MS updated the Windows print spooler. > For details and how to fix it in a Samba AD, see: > > https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Client > s#Creating_a_GPO_for_Trusting_the_Print_Server I have seen that but I guess it does not apppy in my situation

...d on the server). > > Your situation sounds really like it is caused by this MS update. However, if you tested this > with a fresh install without installing any updates, it's unlikely. > > > Can you please go through the following guides: > https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server > https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients > and make sure that everything matches your environment? Especially that you use an account that > has the SePrintOperatorPrivilege privilege granted and is able to write to the print$ sha...

Hi list, I have an NT4-style domain controller running on Samba 4.2.14-debian (Debian Jessie) that is acting as a file server. I am reading through the documentation, and attempting to use it as a print server as well. I have added the share declarations that I believed I needed, and CUPS is working properly with a test printer. Below is my smb.conf file (some sections redacted): [global]

Hi, I have problems setting up the printer drivers using samba. I use a fresh setup of Samba Version 4.11.4-SerNet-Debian-6.buster and followed * https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member * https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server * .../Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients Cups is the default debian setup with only one printer added via lpd. The printer model is KONICA MINOLTA C364e and the driver is KONICA MINOLTA C364SeriesPCL version 5.3.0.500; Type 3 - User mode. At the end of Setting_up_S...

...etup a print server > >> for windows client with a cups backend where for now one printer > >> run. > >> > > > >> So.. what do I miss ???? > > > > Possibly this page on the the Samba wiki: > > > > https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server > > I’ve read it, applied it… does not work for me…. > Why doesn't it work for you ? Do you get any error messages ? Just saying it 'does not work for me' doesn't help anybody. Rowland

Is there a recommendation or restriction where to place CUPS printing? On a DC or not, on the DM or not? customer wants printer server, and I have to choose which server to install that on. found: https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server but it doesn't mention any specific server to use afaik

...(as long as it is not updated on the server). Your situation sounds really like it is caused by this MS update. However, if you tested this with a fresh install without installing any updates, it's unlikely. Can you please go through the following guides: https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients and make sure that everything matches your environment? Especially that you use an account that has the SePrintOperatorPrivilege privilege granted and is able to write to the print$ share. I rewrote...

Hello, currently I am trying to setup a Samba environment (Samba AD DC, Samba Fileserver, Samba Printserver) using Samba version 4.5.8-Debian and CUPS version 2.2.1-8 on Debian 9 "Stretch". I am trying to setup "Point'n'Print" atm. While my Active Directory domain and the fileserver work well with my Windows 7 clients, I am having some issues with the printserver.

...0.0 and 6.2.1 and 6.5.0 drivers. Off these i know they should work. Only thing here is i cant really the exact setup, its years old already and i changed to kyocera printers. One major thing here, i configured this all from a win7 x64 pc, not win10. Based on : https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server The part : Adding a printer to the Print Server Back End I only use : AppSocket/HP JetDirect Why? Because i noticed it always workes, i let the computer make the print job then send it. Same for my Kyocera printers, all use : socket://x.x.x.x:9100 And you could increase the debuglevel of cups...

So after Rowland's adviced changes. I use this part for printing. https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server I added this to the smb.conf for my print server (note, i use a member server). I use cups - raw so my clients generate the print job. ##### PRINT SERVER PART ####### #enable asu support = yes ## Enabling spoolssd rpc_server:spoolss = external rpc_daemon:spoolssd = fork # M...

Hi, Running Samba 4.4.10 as a NT-domain controller. Does anybody know what the error message "access DENIED for non-printserver bits" (log level 3) means when trying to add a new printer driver? Regards, Åke

Is there any way, other than installing CUPS on windows, to get the damn Win laptop to print to my C 6 box, which has CUPS running and a USB laserjet? mark

...ervice to resolve user and group information from Windows NT servers And run pam-auth-update The smb.conf is almost the same as my other member servers. Except the below part, thats only for a dedicated printserver. ##### PRINT SERVER PART ####### # Source : https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server ## Enabling spoolssd rpc_server:spoolss = external rpc_daemon:spoolssd = fork spoolss:architecture = Windows x64 spoolssd:prefork_min_children = 5 # Minimum number of child processes spoolssd:prefork_max_children = 25 # Maximum number of child processes...