search for: server_a

hello all, i have two asterisk server for call transfer and one more asterisk server for agent login(server_X) where agent take the call. server_A and server_B server_A is connected with pri and configure with 60 channel for call transfer into server_X server_B is connected with pri and configure with 30 channel for call transfer into server_X my query is that some time two call originate same time from two different server_A and server_B a...

Hello, I have the following construction : Provider --> SipAgent (asterisk) --> Asterisk Server_A --> IP-phone (Snom 370) If a call comes in from the "Provider" to my SipAgent, then my SipAgent send the call to the correct Asterisk Server_A (dialplan logic based on number). The Asterisk Server_A takes the call and sends it to the IP-phone. My SipAgent has DirectMedia=yes so th...

Hello, hello Rowland, So the physical configuration is something like below : +-------------------------------+ server_a   Samba AD DC   Domain: mycompany.net   Subnet: 192.168.1.0/24   IP    : 192.168.1.2 +-------------------------------+ +-------------------------------+ pc_a_1   FQDN: pc_a_1.mycompany.net.   IP:   192.168.1.33 +-------------------------------+ +-------------------------------+ pc_a_2   FQ...

...s. Now I've configured the SBC to also act as a registration proxy, forwarding SIP registrations coming from the Internet to my asterisk servers. It all seems fine, but it doesn't work well, because by the time at least one phone registers through the SBC to some asterisk server (lets say, server_A), future incoming calls coming from my SIP telco trunks to my server_A got refused by the asterisk running on that server, with "401 Unauthorized" messages back to the SBC. Seems like that since the moment asterisk binds some contact to the IP of the SBC, because it registered through it,...

Hello, hello Rowland, So the physical configuration is something like below : +-------------------------------+ server_a Samba AD DC Domain: mycompany.net Subnet: 192.168.1.0/24 IP : 192.168.1.2 +-------------------------------+ +-------------------------------+ pc_a_1 FQDN: pc_a_1.mycompany.net. IP: 192.168.1.33 +-------------------------------+ +-------------------------------+ pc_a_2 FQDN: pc_...

...hosted at the same upsd. With only one upsmon per upsd, each upsmon is in "master" mode - there are no slaves yet. UPS A1 -> Server A-1 PSU 1 \ > driver -> upsd -> upsmon UPS A2 -> Server A-1 PSU 2 / In this case, upsmon would monitor UPS_A1 at Server_A-1 and UPS_A2 at Server_A-1. Let's say you add a Server A-2 to the group. If you don't mind ensuring that server A-1 is up all the time (e.g. if there are other critical processes already running on it), you could just make A-2 a slave to the upsd on A-1. (Trust me, my ASCII art skills are...

I've used nut for simple configurations before but now one has grown to a more complex setup and can't seem to find any info online. I would like to have single central nut master monitor a bank of UPSs for a whole rack of servers with redundant PSUs. So UPS A1 ---> Server group A PSU 1 UPS A2 ---> Server group A PSU 2 UPS B1 ---> Server group B PSU 1 UPS B2 ---> Server

Hi, I have two DSL line from the different provider connected to my Linux Router Firewall. Server_A is behind the Linux Router Firewall. DSL0 -- | ---- LINUX_ROUTER_FW -- SERVER_A DSL1 -- I have the following IPTABLES command to make incoming access to Server A''s web service throught port 82 as below: - $IPTABLES -t nat -A PREROUTING -i eth1 -p tcp --dport 82 -j DNAT --...

Hello, My post is about having two Samba 4 AD DC at two different geographical places and access resources bidirectionnaly through a VPN as summarized in the schema below. ------------------------- Geographical site 1 ------------------------- - AD DC: Samba 4.1.4 - LAN_1 IPs: 192.168.1.0/24 - Machines DNS names: <hostname>.company.lan - Some machines do not move from this site. - Some

Thank you for the reply. I have done the sync manually with "doveadm sync" command. But, I have not configured the replication yet. I am looking at the below webpage for the replication. https://wiki.dovecot.org/Replication I am using the dovecot version "2.2.36". I am confused with what needs to be done after reading that page. 1. They are talking about v2.3.1 and v2.2+.

...for user vmail (passwordless authentication) on both servers. > 2. Also, do I need to set the replication on both of my servers the same and as it is? On server A) you should configure mail_replica = remote:vmail at server_B and on server B) you should configure mail_replica = remote:vmail at server_A If you skip B) and new mail arrives on B) it is not immediately synced to A) In that case you would have to wait until a mail gets synced from A) (you remember sync is bidirectional) Best regards Gerald -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://do...

I have two server Server_A(outbound call) for agent login and agent make a outbound call from here and pass into server Server_B call extension.conf exten => _91XX.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _91XX.,n,Dial(SIP/${EXTEN}@192.168.53.197,,tToR) exten => _91XX.,n,hangup() Server_B[192.168.53.197] f...

...y one upsmon > per upsd, each upsmon is in "master" mode - there are no slaves yet. > > UPS A1 -> Server A-1 PSU 1 \ > > driver -> upsd -> upsmon > UPS A2 -> Server A-1 PSU 2 / > > In this case, upsmon would monitor UPS_A1 at Server_A-1 and > UPS_A2 at Server_A-1. > > Let's say you add a Server A-2 to the group. If you don't mind ensuring > that server A-1 is up all the time (e.g. if there are other critical > processes already running on it), you could just make A-2 a slave to the > upsd on A-1. (Trust...

...; authentication) on both servers. > > 2. Also, do I need to set the replication on both of my servers the same > and as it is? > > > On server A) you should configure mail_replica = remote:vmail at server_B and > on server B) you should configure mail_replica = remote:vmail at server_A > > If you skip B) and new mail arrives on B) it is not immediately synced to > A) > In that case you would have to wait until a mail gets synced from A) > (you remember sync is bidirectional) > > Best regards > Gerald > -------------- next part -------------- An HTML att...

Hi Abi Can you please share your current transfer speeds after you made the change? Thank you. On Mon, Sep 11, 2017 at 9:55 AM, Ben Turner <bturner at redhat.com> wrote: > ----- Original Message ----- > > From: "Abi Askushi" <rightkicktech at gmail.com> > > To: "Ben Turner" <bturner at redhat.com> > > Cc: "Krutika Dhananjay"

...e logs were > showing > > the below (even after rebooting the server): > > > > [2017-09-06 10:56:09.023777] E [rpcsvc.c:557:rpcsvc_check_and_reply_error] > > 0-rpcsvc: rpc actor failed to complete successfully > > [2017-09-06 10:56:09.024122] E [server-helpers.c:395:server_alloc_frame] > > (-->/lib64/libgfrpc.so.0(rpcsvc_handle_rpc_call+0x325) [0x7f2d0ec20905] > > -->/usr/lib64/glusterfs/3.10.5/xlator/protocol/server.so(+0x3006b) > > [0x7f2cfa4bf06b] > > -->/usr/lib64/glusterfs/3.10.5/xlator/protocol/server.so(+0xdb34) > > [0x7f2c...