search for: semprons

Agreed: Should have read "socket A" semprons, since these are the most common currently although rapidly disappearing... >*1* type of Sempron is an Athlon XP processor, the Socket-462 >versions. With the Socket-754, it is an Athlon 64, although >most have their 64-bit functions disabled. Only the lastest, >specifically brand...

I have a desktop unit with a sempron 2500+ to play with. doing "more /proc/cpuinfo" indicates cpu Mhz as1044 not the 2500 I am familiar with cpuspeed. doing ps ax | grep cpuspeed resulting in nothing. I did service cpuspeed start. No errors reported. ps ax | grep cpuspeed resulted in nothing. I was going to do "killall -SIGUSR1 cpuspeed" to attempt to get 2500+ cpu speed. I

Hi all, Is it ok to use the i686 kernel in an AMD Sempron or should I be using another? regards tom

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi I''m currently using xen-3.0.2-testing on several servers. But when xen 3.0.3 was announced I wanted to try it, of course it should have several iprovements and bugfixes, etc. I did the same steps I was previously done in order to compile xen-3.0.2, and in fact xen compiled and installed very cleanly. I created my initrd image and then I

Guys, I''m in the market for a reliable, trustworthy dedicated server solution. I''ve been running my own servers internally on a Speakeasy Static IP DSL connection, but recent problems with my local loop has caused me to reconsider this solution. completelydedicated.com offers a value Sempron for $59/monthly...a bit higher than I wish to go but I have no choice. Can

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

I have a quick question. The board and CPU that I'm using in one of my machines was given to me. I didn't take the time to look up the info on the board or anything. I was busy, so I just put the board in a pc case, hooked everything up, and loaded the os on the machine. I didn't know it at the time, but there's a chance it may be a 64bit board and cpu. I don't

Hi, The following 4 patches enable direct device assignment (PCI passthru) for HVM guest on AMD IOMMU platforms. Please apply them against C/S 16491 as the named order. To enable AMD IOMMU, please add "enable_amd_iommu" as xen boot parameter. 1-cleanup.patch: code cleanup, bug fix, minor enhancements to existing amd-iommu codes. 2-passthru-amd.patch: passthru support, modifications to

http://bugs.freedesktop.org/show_bug.cgi?id=23822 Summary: Blank Screen during nouveau/xen boot Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy:

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

Hi all, I need to setup call using particular timeslot on one of E1's. I've looked into http://www.voip-info.org/wiki/index.php?page=Asterisk+Zap+channels and it says that: exten => TestTrakt,1,Dial(ZAP/1-2/517255333) exten => TestTrakt,2,hangup should work and force call setup via span 1 (port 1) but when I try setup call rasterisk says: -- Executing [TestTrakt at

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

I am currently running Asterisk 1.2.8, on an AMD Sempron 3100+ (ASUS K8N Nforce based board). I am using a Digium wctdm24xxp to terminate 8 (2x quad) FXO lines. Using ztmonitor (From zapata) I cannot see that there is any registerable incoming volume from these lines. I've been running them at rxgain = 25 (zapata.conf) to make the audio audible, however this creates poor call quality issues

Hi All, Need some information on getting the right storage array to buy for my cluster configuration can anyone help me with this my Setup so far 2 Athlon 2800 Sempron System 1 Wti Network power switch 1 24 Port 10/100 Cat5 switch 2 Adaptec 39160 scsi host adapter pci cards installed in the systems. I need to know what is the best storage solution with this configuration Thanks

Hello, i have a Pc AMD Sempron 2.6 and I downloaded Centos v4.1 to install as a Server. When I install the version 4.1 i386 the linux installation says "abnormally exited, you must safe reboot your machine". There aren't no compatibility between Centos 4.1 and AMD Sempron Processor? How can I install sempron in this machine? Version? Thanks, Juan Fracisco <mailto:juanarribillaga

All, I have a new box. Gigabyte motherboard AM2 sempron 3200+. CentOS installed fine, I rebooted after the install. It booted fine again. I ran yum -y update and now after that on boot it says Initializing hardware Storage network audio done Disabling IRQ #193 and then nothing. just sets there.... Any ideas on that??? Jerry

Hi, I''ve recently installed xen-3.2.1 on my AMD Sempron(tm) machine. It runs gentoo 2.6.21 as dom0 and cpu frequency scaling works in dom0. But inside a domU, cpu frequency scaling is not working. By checking the boot log in domU I found that domU is unable to load the powernow driver: "powernow-k8: BIOS error - no PSB or ACPI _PSS objects" I wonder if it is possible to have

I've heard that it's possible to run Orange Box on WINE. I've tried several tutorials but can't get it to work - I got it all to install, and Steam pops up no problem, but the games crash at the loading screen and bring me back to my desktop. I even tried the original Half-Life - does the same thing. I tried using the command line to see if there would be any error or debug

Full_Name: marco zamboni Version: no R version OS: ubuntu gusty Submission from: (NULL) (87.9.174.188) I have just finish to install gusty ubuntu on my AMD sempron. I would like to: $ sudo apt-get install r-base but ... I seguenti pacchetti hanno dipendenze non soddisfatte: r-base: Dipende: r-base-core (>= 2.6.1-1gutsy0) ma 2.5.1-1 sta per essere installato Dipende:

Full_Name: marco zamboni Version: no R version OS: ubuntu gusty Submission from: (NULL) (87.9.174.188) I have just finish to install gusty ubuntu on my AMD sempron. I would like to: $ sudo apt-get install r-base but ... I seguenti pacchetti hanno dipendenze non soddisfatte: r-base: Dipende: r-base-core (>= 2.6.1-1gutsy0) ma 2.5.1-1 sta per essere installato Dipende: