search for: semiconductors

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi Laine, Sorry to disturb you. It seemed this issue had been fixed in libvirt-1.2.2/libnl-3.2.22/linux-3.12. But we still got the error on PowerPC platform. I'll appreciate if you could give any suggestion. We are not sure if any netlink implementation in kernel space is missed. The scenario is a little complicated. We installed internal PF and VF kernel modules and want to use

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

My UPS has a usb interface with USB-to-Serial chip. But ucycom driver doesn't recognize it. uhid driver does, but it doesn't help me, I need a virtual com port. (output below is without uhid loaded) What can I do to get it working? udi = '/org/freedesktop/Hal/devices/usb_device_665_5161_noserial' freebsd.device_file = '/dev/ugen1' (string) freebsd.driver =

Hello I have two completely different UPS that turn out to use the same driver. Both work with blazer_usb my LSUSB says: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial my lsusb -vd 0665: says: pi at elektra:~ $ lsusb -vd 0665: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial

greetings one and all. installing centos 7 32 bit i386 to laptop; specs: toshiba satellite l455d-s5976 amd sempron si-42 2 GB ddr2 250 GB hdd ]$ lspci|grep Realtek 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. \ RTL8187SE Wireless LAN Controller (rev 22) 14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. \ RTL8101/2/6E PCI Express Fast/Gigabit Ethernet

Hi : I am trying to do PCIe passthrough on HVM domu. I have window XP as a HVM domu and xen-4.0. dom0 and domU (without device assign) works fine. I have more than one NIC card. I want to passthrough 03:00.0 to domu here are the list of my nic cards: lspci | grep -i eth 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

Dear all, In the SASmixed package there is an example of an analysis of a split-plot experiment. The model is fm1Semi <- lme( resistance ~ ET * position, data = Semiconductor, random = ~ 1 | Grp) where Grp in the Semiconductor dataset is defined as ET*Wafer. Is it possible to specify the grouping directly some way, e.g. like fm1Semi <- lme( resistance ~ ET * position, data =

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR or Eindhoven, Netherlands. Back-End LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR. Senior LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming models for new cores and

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR or Eindhoven, Netherlands. LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming models

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi everyone, I installed latest version of Nut on Debian Wheezy 64bit. This is a virtual server hosted by VMware ESXi. It's a Nagios monitoring server. I configured one Sweex UPS in ups.conf and everything is working. ups.conf: [sweex1] driver = blazer_usb port = auto runtimecal = 1100,100,2200,50 Now I want to connect two more identical UPSes to the same server, total of 3

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

Hi Having followed this guide: http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/and seeing support for Apollo UPSes mentioned on the compatibility list (genericups, type=4) I tried to set up Nut as follows. OS: Ubuntu Server 12.04 Nut: 2.6.3 (I believe - from Ubuntu repos) ups.conf: > [apollo] > driver = genericups > upstype = 4 > port = /dev/ttyUSB0

Hello I just read an article on the tiny Ben NanoNote: http://en.qi-hardware.com/wiki/Ben_NanoNote As CPU, it uses a "JZ4720 366 MHz MIPS compatible processor from Ingenic Semiconductor Co", and it runs Linux. Does someone know if Asterisk has been ported to that platform? Thank you.

Greetings, I'm trying to add a virtual nic to an existing and active vm and I'm getting this error: error: internal error: No more available PCI slots the cmd I'm trying to run is: virsh -c qemu:///system attach-interface --domain router --type bridge --source virbr0 --model virtio --config --live the lspci output within the vm is this: # lspci 00:00.0 Host bridge: Intel Corporation