search for: semiconductor

...el Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] (rev a1) 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0a:0a.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) 0a:0a.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) 0a:0c.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) 0a:0c.1 Bridge: Oxford Semiconductor Ltd OX16PCI954...

...it Network Connection fslinic 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 1, Tx Queue count = 1 fslinic 0000:01:00.1: Freescale (R) 10 Gigabit Network Connection # insmod fslinicvf.ko Freescale 10 Gigabit PCI Express Network Driver # lspci -mk 00:00.0 "PCI bridge" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 01:00.0 "Power PC" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 01:00.1 "Power PC" "Freescale Semiconductor Inc" "Device 0440" -r20 ""...

...exit status=1) / //My "/usr/local/ups/etc/ups.conf" contain: user = root [mustek] driver = blazer_ser port = auto UPS is connected over USB and log from "message" show next on connect: hiddev97: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1a.0-1 Can i get some help please? :) thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20120102/f206e506/attachment.html>

...arent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial' (string) info.product = 'USB to Serial' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_665_5161_noserial' (string) info.vendor = 'Cypress Semiconductor' (string) usb_device.bus_number = 0 (0x0) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 2 (0x2) (int) usb_de...

Hello I have two completely different UPS that turn out to use the same driver. Both work with blazer_usb my LSUSB says: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial my lsusb -vd 0665: says: pi at elektra:~ $ lsusb -vd 0665: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor: bLength 18 bDescriptorType 1 b...

greetings one and all. installing centos 7 32 bit i386 to laptop; specs: toshiba satellite l455d-s5976 amd sempron si-42 2 GB ddr2 250 GB hdd ]$ lspci|grep Realtek 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. \ RTL8187SE Wireless LAN Controller (rev 22) 14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. \ RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02) ]$ lspci|grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] \...

...rying to do PCIe passthrough on HVM domu. I have window XP as a HVM domu and xen-4.0. dom0 and domU (without device assign) works fine. I have more than one NIC card. I want to passthrough 03:00.0 to domu here are the list of my nic cards: lspci | grep -i eth 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) 06:01.0 Ethernet controller: Realtek Semiconducto...

...d. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet re0@pci0:2:4:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8169/8110 Family Giga...

Dear all, In the SASmixed package there is an example of an analysis of a split-plot experiment. The model is fm1Semi <- lme( resistance ~ ET * position, data = Semiconductor, random = ~ 1 | Grp) where Grp in the Semiconductor dataset is defined as ET*Wafer. Is it possible to specify the grouping directly some way, e.g. like fm1Semi <- lme( resistance ~ ET * position, data = Semiconductor, random = ~ 1 | ET*Wafer) (this does not work, I know, but somehow I woul...

...se options (man 8 megatec_usb). Please report your results to the NUT user's mailing list <nut-upsuser at lists.alioth.debian.org>. My device is connected in the bus 001, device 004, and when i do a lsusb -s 001:004 -vvv the result is as follows: Bus 001 Device 004: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x...

...se options (man 8 megatec_usb). Please report your results to the NUT user's mailing list <nut-upsuser at lists.alioth.debian.org>. My device is connected in the bus 001, device 004, and when i do a lsusb -s 001:004 -vvv the result is as follows: Bus 001 Device 004: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x...

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR or Eindhoven, Netherlands. Back-End LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR. Senior LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming models for new cores and

Greetings, Please review the job descriptions below and if you or any of your associates are interested please submit your resume. This is a full-time position in San Jose, CA or Portland, OR or Eindhoven, Netherlands. LLVM Compiler Engineer Responsibilities: - Develop specific code generation and optimizations in the LLVM-based compiler back-end - Implement new programming models

...ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ...

...s:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 046: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 002 Device 085: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 002 Device 098: ID 0665:5161 Cypress Semiconductor USB to Serial The problem is that all UPSes are connected to the same bus and I cannot change this, because ESXi gives you only one virtual USB controller. Unl...

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet re1@pci0:2:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-...

...as follows. OS: Ubuntu Server 12.04 Nut: 2.6.3 (I believe - from Ubuntu repos) ups.conf: > [apollo] > driver = genericups > upstype = 4 > port = /dev/ttyUSB0 Problem is that there is no ttyUSB0 device. UPS attaches to machine via USB cable, and lsusb indicates that it is a Cypress Semiconductor USB to Serial cable. > $ lsusb > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 r...

Hello I just read an article on the tiny Ben NanoNote: http://en.qi-hardware.com/wiki/Ben_NanoNote As CPU, it uses a "JZ4720 366 MHz MIPS compatible processor from Ingenic Semiconductor Co", and it runs Linux. Does someone know if Asterisk has been ported to that platform? Thank you.

...ller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) 03:00.0 SCSI storage controller: Red Hat, Inc. Virtio block device (rev 01) 04:00.0 Ethernet c...