search for: sdram

...tream, it represent about 150 Kbyte of each buffer, so I will need about 500 Kbytes of memory. It is too much to use FPGA internal memory. So I'm planning use a external SRAM of 500Kbytes. SRAM data sheet: http://www.olimex.com/dev/pdf/71V416_DS_74666.pdf Another alternative is to use a PC100 SDRAM of 16 Mb: http://download.micron.com/pdf/datasheets/dram/sdram/128MbSDRAMx32.pdf http://www.altera.com/literature/ds/ds_sdram_ctrl.pdf My Altera Stratix Dev. Kit has this SRAM and SDRAM. See: http://www.altera.com/literature/manual/mnl_nios2_board_stratixII_2s60.pdf Please, comments and sugest...

...WD800BB 80G/UDMA 100/2M/7200rpm/IDE/3.5" 430 WD1000BB 100G/UDMA 100/2M/7200rpm/IDE/3.5´ç 750 WD1000 100G/UDMA 100/8M/7200rpm/IDE/3.5" 900 WD1200BB 120G/UDMA 100/2M/7200rpm/IDE/3.5" 700 WD1200 120G/UDMA 100/8M/7200rpm/IDE/3.5" 750 Îå¡¢Hy ÄÚ´æ 64M 7ns/168PIN SDRAM/PC-133 28 128M 7ns/168PIN SDRAM/PC133 50 256M 7ns/168PIN SDRAM/PC133 95 128M DDR 184PIN DDR RAM/Ô­³§ÄÚ´æ 53 256M DDR 184PIN DDR RAM/Ô­³§ÄÚ´æ 100 Kingmax 128M 7ns/168PIN SDRAM/PC-150 60 256M 7ns/168PIN SDRAM/PC150 130 128M DDR333 168PIN DDR RAM 70 256M DDR333 1...

...---- -------------------------- Dual Core AMD Opteron(tm) Processor 270 CPU 1 Dual Core AMD Opteron(tm) Processor 270 CPU 2 ==== Memory Device Sockets ================================ Type Status Set Device Locator Bank Locator ------- ------ --- ------------------- -------------------- SDRAM in use 0 DIMM0 BANK0 SDRAM in use 0 DIMM1 BANK1 SDRAM in use 0 DIMM2 BANK2 SDRAM in use 0 DIMM3 BANK3 SDRAM in use 0 DIMM4 BANK4 SDRAM in use 0 DIMM5 BANK5 SDRAM in use 0 DIMM6...

...e level of TI's website seems to incorrectly indicate only 64K of L2. I turned off MANUAL_ALLOC and have it allocating internal memory using calloc(). I did change the L2 cache to 2 way (32K) and adjusted the heap size to 12K to get it to fit. I put a wavefile and the .cinit, .const up in the SDRAM. name origin length used attr fill ---------------------- -------- --------- -------- ---- -------- IRAMB 00000000 00000400 00000000 RWIX IRAMP 00000400 00028c00 00028218 RWIX...

...cessor and after to do a integration with the Hardware modules. For this, we will need to choose the processor. Stratix II (FPGA Altera) have a good support to NIOS. The alternative of a nonproprietary processor could be the LEON, but I think it maybe demand pretty much work to do run. 2 - To do a SDRAM controller. http://www.students.ic.unicamp.br/~ra031198/sdram_controller.JPG I think it is most important of all the tasks, because the current theora hardware can just have a maximum resolution of 280x210. I don't how much hard it will be to do this. Tomorrow I will have a chat with a professo...

...¤11800 F.¸»Ê¿Í¨ FUJITSU C6651 PIII1.13G/256M/20G/8XDVD/14.1"TFT/56K/100M/TV-OUT/Ö§³ÖÀ¶ÑÀ/3K£¤6800 P1030 Cruse700/128M/20G/8.9"tft/56K/100M/0.88Kg£¤4500 C7631 PIII1.13G/256M/30G/8XDVD/15.1"TFT/56K/100M/TV-OUT/Ö§³ÖÀ¶ÑÀ/3K£¤7200 ¶þ.µçÄÔÅä¼þ(RMB.Ôª): A:Ö÷°å: ΢ÐÇ 845Pro2-LE(Socket,i845,SDRAM,AC97Éù¿¨)---530 845Pro (Socket,i845,SDRAM,AC97Éù¿¨)--580 850Pro5 (Socket,i850,8738Éù¿¨)----740 645UITRA (Socket478,SiS645оƬ 3DDR AC97)--480 K7T266Pro (SocketA,KT266,3DDR,AC97)--460 K7T266Pro2-LE(SocketA,AC97,ATA100)---410 K7t266Pro2(SocketA,Ö§³ÖXP,3DDR,AC97)---460 815EPT Pro-NL(Socket370,i815EP,Ö...

...x96fba000 - 0x96fd9fff com.apple.vecLib 3.1.1 (vecLib 3.1.1) /System/ Library/Frameworks/vecLib.framework/Versions/A/vecLib Model: PowerMac7,2, BootROM 5.0.7f0, 2 processors, PowerPC 970 (2.2), 2 GHz, 8 GB Graphics: ATI Radeon 9600 Pro, ATY,RV350, AGP, 64 MB Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM4/J41, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM5/J42, 1 GB, DDR SDRAM, PC3200U-30330...

...­Óª¹æÄ£,ÒâÔÚ¹óµØ Ñ°ÕÒÁôÒ×´°¿Ú,Ìؽ«´Ë¼Ûͬ±í³Ê¹óµ¥Î»²Î¿¼.ÎÒ˾ÌṩһÁ÷Æ·ÖÊ,Ò»Á÷·þÎñ,ËÍ»õÉÏÃÅ, »õµ½¸¶¿î, ÅúÁí¾ù¿É.»¶Ó­¸÷½çÅóÓÑÀ´µç´¹Ñ¯¼°Ö§³Ö.¶àл!!! ̨ÍåÕýÈÙ¹ú¼ÊóÒ×¹«Ë¾ ÖйúITóÒײ¿ :Áø½ðÃú ÇëÎðÖ±½Ó»Ø¸´£¬ÓÐÒâÕßÇëÀ´µç ------0138-50738839 Ò».µçÄÔÅä¼þ(RMB.Ôª): A:Ö÷°å: ΢ÐÇ 845Pro2-LE(Socket,i845,SDRAM,AC97Éù¿¨)---530 845Pro (Socket,i845,SDRAM,AC97Éù¿¨)--580 850Pro5 (Socket,i850,8738Éù¿¨)----740 645UITRA (Socket478,SiS645оƬ 3DDR AC97)--480 K7T266Pro (SocketA,KT266,3DDR,AC97)--460 K7T266Pro2-LE(SocketA,AC97,ATA100)---410 K7t266Pro2(SocketA,Ö§³ÖXP,3DDR,AC97)---460 815EPT Pro-NL(Socket370,i815EP,Ö...

...x96fba000 - 0x96fd9fff com.apple.vecLib 3.1.1 (vecLib 3.1.1) /System/ Library/Frameworks/vecLib.framework/Versions/A/vecLib Model: PowerMac7,2, BootROM 5.0.7f0, 2 processors, PowerPC 970 (2.2), 2 GHz, 8 GB Graphics: ATI Radeon 9600 Pro, ATY,RV350, AGP, 64 MB Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM4/J41, 1 GB, DDR SDRAM, PC3200U-30330 Memory Module: DIMM5/J42, 1 GB, DDR SDRAM, PC3200U-30330...

...a rebadged Mustek). Everything worked fine and last week, when pressed by RENEL :-) I ran a battery test which showed the system to have 17min of back-up power (yes, still haven't figured out how to use upssched...) The system used for testing was an old PIII/500MHz/512KB cache, 256MB RAM (3 x SDRAM 100MHz) 1 x 8GB hdd IDE and a 250W PS. For various reasons I've switched to a new system consisting of one Duron 900MHz, 1 piece of 512MB RAM DDR1 and a 12GB IDE (same family as the previous 8GB). After reinstall, an upgrade to "nut-2.2.0-6.1.fc8", copying of the same nut config files...

I am planning to build a server based on the SuperMicro X7DBE+-O motherboard. This server will have two dual-core Xeon processors and a 3ware 9550SX raid card. Has anyone built a server based on this motherboard? Are there any issues with the smp/dual-core support in CentOS4 that might cause problems? I appreciate any input. I'm just looking to find out about any possible problems before

...- 16 Kbyte Data Cache - Linux?, Microsoft? Windows? CE enabled MMU - 100 MHz System Bus - MaverickKey? IDs - 32-bit unique ID can be used for DRM compliance 128-bit random ID - Integrated Peripheral Interfaces - 16-bit SDRAM Interface up to 4 banks - 16-bit SRAM/FLASH/ROM - Serial EEPROM Interface - 1/10/100 Ethernet MAC - Two UARTs - Two-port USB2.0 Full Speed Host (OHCI) (12 Mbits per second) - IrDa Interface - Analog to Digita...

Andrey Fillipov posted the following update at his sourceforge website on 11/16/04. "Coded and simulated the DC predictor module - hope the Theora description I used matches the actual codec :-) Also modified the modules released earlier to support non-coded blocks. For the DCT/IDCT I tried to reduce the power consuption by minimizing switching of the registers and counters when the

...sonalmailbox1 at mail.com Hardware: x86 (IA32) Status: NEW Version: unspecified Component: Driver/nouveau Product: xorg Hi, I will report that when I use BFG Technologies GeForce 7300 GT AGP graphics card (NVIDIA GeForce 7300 GT AGP 512 MB DDR2 SDRAM) on FIC VA-503+ mainboard (VIA Technologies Apollo MVP3 chipset), it will not display text characters when AGP aperture setting is set to 64 MB, 128 MB, or 256 MB settings. If the AGP aperture size is set to 32 MB or less (i.e., 4 MB, 8 MB, 16 MB, and 32 MB), the text characters will get displayed...

I am going to improve theora codec with dynamically changing way. In this case we want to change compression parameters like video_q, sharpness when a keyframe is generated. When i set video quality parameter using cpi-> pb.info.quality in CommpressKeyFrame in encoder_toplevel it will not change dynamically. Can you please help me to do this. Wich function should i cange to achieve my

I started my project using the CodeComposerStudio speex_C64_test.pjt in speex 1.1.11.1. To build using floating point, I created a new project with the same files and modified ti\config.h to #undef FIXED_POINT. Is there a better way to configure a floating point processor? I have a few TI specific optimizations that could go into the next release. What's the procedure for submitting code?

...t: Thursday, August 12, 2004 10:46 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] How Many Calls On This Config I've seen a couple posts about SMP, and I'm wondering if anyone has an idea what I can handle with this box: Dual P2 Xeon 450 MHZ with 2MB L2 Cache 1 GB PC100 SDRAM RAID 5 Running SuSE 9.1 2.6 SMP Kernel... Currently I have 16 users, 10 CISCO 7912G Using ULAW 3 Sipura 1000's Using GSM or g726 2 Motorola MTA VT1005's Using ULAW 1 Iaxy Using ULAW and g726 So far I've had 7 concurrent calls with mixed codecs and no issues on call quality. I'...

hi all what about this... I just put together a box on a web shop (komplett.no) that will cost me NOK ~1850 (? 216) plus a small ?50 drive and cables, so say ?300. This consists of a cheap MB with a duron 1400, 256MB SDRAM and two HFC-PCI cards (if capijod will finish off the zaptel-driver soon). This is all in a cheap PC case. What do you think? Should this be doable? as a product? With only IP phones and potentially a fax solution? any ideas? thanks roy

...ps 24.) -- Nuno J. Silva (aka NJSG) Lisbon, Portugal Homepage: <http://njsg.no.sapo.pt/> Registered Linux User #402207 - http://counter.li.org Using Mozilla Thunderbird 1.0.7 Gentoo Linux -- Linux 2.6.15-gentoo-r1 i686 Mobile Pentium II Intel Pentium II (80686) Deschutes - 334Mhz -- 256 Mbs SDRAM Intel Mobile Pentium II (80686) - 300 Mhz -- 64 Mbs SDRAM Intel Pentium (80586) - 166 Mhz -- 32 Mbs RAM -=-=- ``If you're not my friend, you're my enemy.'' -- Anakin Skywalker, Star Wars III - The Revenge of the Sith -------------- next part -------------- A non-text attachment...

I've recently installed the latest Debian Linux for powerpc onto and old iMac (version A) the original iMac with a 233Mhz G3 processor and 160MB of sdram. The debian install went smooth and so the the apt-get install of Asterisk 1.4.21 It appears to have no functioning zaptel or ztdummy module. Is because of hardware? or is it because whoever built the package didn't include a full working zaptel with ztdummy? In other words is zaptel &...