search for: sdc6

...2 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 2 8 54 2 active sync /dev/sdd6 3 8 38 3 active sync /dev/sdc6 As far as I know raid10 is ~ "a raid0 built on top of two raid1" ( http://en.wikipedia.org/wiki/Nested_RAID_levels#RAID_1.2B0 - raid10). So I think that by default in my case: /dev/sda6 and /dev/sdb6 form the first "raid1" /dev/sdd6 and /dev/sdc6 form the second "raid1&qu...

Which disk is it? /dev/sda6 or /dev/sdb8 or /dev/sdc6? >From my log: Jun 10 21:25:39 postamt1 kernel: attempt to access beyond end of device Jun 10 21:25:39 postamt1 kernel: 08:06: rw=0, want=1680353324, limit=59954548 Jun 10 21:25:39 postamt1 kernel: EXT3-fs error (device sd(8,6)): ext3_readdir: directory #3473659 contains a hole at offset 18523...

I've taken my RH7.1 system, rebuild kernel (2.4.9 with ext3 patches) and followed the ext3 instructions to install. Everything seems to work OK but - df -k doesn't list the ext3 partition (my root partition). Is this a known problem ? If not, how best can I gather diagnostics to identify the source of the problem ? Thanks -- Philip Nelson (teamdba@bojnice.com)

Hi, I recompiled my kernel today, and when the btrfs-0.13 option is enabled (CONFIG_BTR_FS=y) I cannot boot on my reiserfs-3.6 partition any more. The kernel says that is cannot mount /dev/sdc6. I can boot the kernel when I recompile it with the same options and CONFIG_BTR_FS=n, and with the same boot options as well. Everything is amd64 on my system (kernel + programs). Here is a screenshot of the error: http://temp.dupoux.com/btrfs/btrfs-0.13-bug-reiserfs.png Here are my kernel option...

...8:32 0 931.5G 0 disk ??sdc1 8:33 0 1000M 0 part /boot ??sdc2 8:34 0 31.3G 0 part / ??sdc3 8:35 0 31.3G 0 part [SWAP] ??sdc4 8:36 0 1K 0 part ??sdc5 8:37 0 184.5G 0 part /home ??sdc6 8:38 0 683.6G 0 part /data01 sde 8:64 0 931.5G 0 disk ??sde1 8:65 0 931.5G 0 part ??mpathj (dm-1) 253:1 0 931.5G 0 mpath ??mpathjp1 (dm-8) 253:8 0 931.5G 0 part /data02 sdf 8:80 0 931.5G 0 disk ??sdf1...

Hello, I can''t load the network in unprivileged domain with xen-unstable (Changset 8612). Xen boots fine and domain0 is OK. When I start a new domain I have the following report when booting: ----------------B<----------------------------- * Not running depmod because /lib/modules/2.6.12.6-xenU/ is not writeable. Loading modules... All modules loaded. FATAL: Could not load

Hi. Which is the preferable method for booting multiple logical partions via syslinux ? 1. Create seperate logical (fat 32) partitons for 'each' Live CD, extracted and prepared identically via syslinux/syslinux.cfg (sdc5, sdc6,sdc7 etc.) 2. Use Grub2 to attempt to boot seperate logical partitions with the same extracted Live CD plan as above. 3. Use the chain.c32 module that comes with the latest syslinux to boot logical partitions... i.e. label Hardy kernel chain.c32 append hd0 4 label CentOS kernel chai...

Hi, Duncan Elliot wrote: > As far as I can see, this essentially trims off the first 3 bytes of the > custom isohybrid MBR image before applying it to the ISO. You probably mean this line: memcpy(mbr, &isohdpfx[hd0 + 3 * partok], MBRSIZE); The indize do not apply to bytes but to byte arrays of size MBRSIZE. extern unsigned char isohdpfx[][MBRSIZE]; (hd0 + 3 * partok)

...rs Size Id Type /dev/sdc1 2048 616447 614400 300M 83 Linux /dev/sdc2 616448 1230847 614400 300M 83 Linux /dev/sdc3 1230848 1845247 614400 300M 83 Linux /dev/sdc4 1845248 7827455 5982208 2.9G 5 Extended /dev/sdc5 1847296 2461695 614400 300M 83 Linux /dev/sdc6 2463744 3078143 614400 300M 83 Linux I 'dd' the ISO to partitions 2, 3, 5 and 6. The ISO will boot successfully (when chainloaded from grub) on 2 and 3, but not on 5 and 6. Thanks, Duncan On 29 December 2016 at 19:35, Thomas Schmitt <scdbackup at gmx.net> wrote: > Hi,...

We''ve been keeping around the inode sequence number in hopes that somebody would use it, but nobody uses it and people actually use i_version which serves the same purpose, so use i_version where we used the incore inode''s sequence number and that way the sequence is updated properly across the board, and not just in file write. Thanks, Signed-off-by: Josef Bacik

..., 2.20, 2.99 This is our main mailbox server. We're running ext3: # cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext3 rw 0 0 /proc /proc proc rw 0 0 /dev/sdb5 /boot ext3 rw 0 0 /dev/sda6 /home ext3 rw,noatime,nosuid 0 0 /dev/sdb8 /tmp ext3 rw 0 0 /dev/sdb7 /var ext3 rw,noatime 0 0 /dev/sdc6 /copymail ext3 rw,noatime,nosuid 0 0 /dev/sdb9 /extra ext3 rw,noatime 0 0 /dev/hda6 /mnt/hda ext3 rw,noatime 0 0 none /dev/pts devpts rw 0 0 All over a sudden I spotted that the pop3d (Courier) wasn't running anymore. I checked and restarted it. /var/log/message showed the authpam (piece belon...

...d via SAMBA (2.2.7) from 200-300 Windows-XX workstations Partition with ext3 looks like this: oceanic:~# mount |grep ext3 /dev/sdb5 on /home1 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdb6 on /home2 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdc5 on /home3 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdc6 on /home4 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdc7 on /home5 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdc8 on /home6 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdb7 on /home7 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdb8 on /home8 type ext3 (rw,nosuid,nodev,usrquota) /dev/sdd5 on /home9 type...

On Sun, Nov 07 2010 at 6:05pm -0500, Andi Kleen <andi@firstfloor.org> wrote: > On Sun, Nov 07, 2010 at 10:39:23PM +0100, Milan Broz wrote: > > On 11/07/2010 08:45 PM, Andi Kleen wrote: > > >> I read about barrier-problems and data getting to the partition when > > >> using dm-crypt and several layers so I don''t know if that could be > >