search for: sccp

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3 [lines] id = 101 pin = 1234 label = User1 descripti...

Hi, I'm struggling with a feature in my home phone setup. I have several phones using both SIP and SCCP. What I try to do is to create a dynamic feature that works similar to the blindxfer feature built into Asterisk. What I want is the possibility for the called part to push a number sequence (for example *#) to redirect the callee to a fixed extension or (for example *123#) to redirect the callee t...

Chris Lattner wrote: > On Tue, 9 May 2006, Nick Lewycky wrote: > >> For an analysis pass, I'm interested in reading the lattice values >> calculated by SCCP. Should I split the current SCCP optimization into an >> analysis piece and the optimization that depends on it, so that I can >> use its analysis results? > > SCCP is already split into an SCCPSolver class that is used by the SCCP > and IPSCCP classes. You should just be abl...

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial=...

On Tue, 9 May 2006, Nick Lewycky wrote: >>> For an analysis pass, I'm interested in reading the lattice values >>> calculated by SCCP. Should I split the current SCCP optimization into an >>> analysis piece and the optimization that depends on it, so that I can >>> use its analysis results? >> >> SCCP is already split into an SCCPSolver class that is used by the SCCP >> and IPSCCP classes. You...

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregis...

Chris Lattner wrote: > On Tue, 9 May 2006, Nick Lewycky wrote: > >>>> For an analysis pass, I'm interested in reading the lattice values >>>> calculated by SCCP. Should I split the current SCCP optimization >>>> into an >>>> analysis piece and the optimization that depends on it, so that I can >>>> use its analysis results? >>> >>> >>> SCCP is already split into an SCCPSolver class that is used...

...n theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what including SCCP packets ... I have a lot of alredy information about SIP,H323 and others, but about SCCP nothing:-( Thanks _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar –...

Chris Lattner wrote: > On Tue, 9 May 2006, Nick Lewycky wrote: > >>> You could do that, but SCCPSolver isn't really useful to mainline LLVM >>> for anything other than SCCP and IPSCCP, so we don't need it in a public >>> header. Out of curiosity, what are you looking to use the latice values >>> for? Why not just run SCCP and then look at the transformed co...

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial from SCCP -> SIP phone with no problem...

> > No, this is not the case currently with any of the Cisco SIP software > loads that I am aware of. If you find this to be incorrect, please > let the list know. Cisco has not deployed much of the featureset in > their SCCP phones (such as paging/intercom) into the SIP phones due > to lack of standards/interest/political capital. > > JT Ok, after further research in the 7960 administrators guide for SIP 5.1 (current is 5.3 and probably not changed much), they do state that support is not provided for Cisc...

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and lo...

For an analysis pass, I'm interested in reading the lattice values calculated by SCCP. Should I split the current SCCP optimization into an analysis piece and the optimization that depends on it, so that I can use its analysis results? Nick Lewycky

On Wed, 10 May 2006, Nick Lewycky wrote: >> Then just run the SCCP pass, and check to see if any operands satisfy >> the predicate "isa<UndefValue>(V)". LLVM explicitly represents >> undefined values. > > I have a case where it doesn't, but perhaps the SCCP pass isn't to blame: > > extern void write_char(int); >...

Anyone have any idea what's causing this or how to debug it? I'm pretty sure the root cause is with chan_sccp.so, but not sure how to prove it. I recently upgraded from CVS-head to 1.2.1 and the chan_sccp from 12-17-2005. Now, once or twice a week, I get this on the console: Jan 31 10:39:08 WARNING[10586]: channel.c:784 channel_find_locked: Avoided deadlock for '0xbf1013e0', 10 retries! Once...

I am trying to register cisco 7920 to asterisk using sccp since to sip firmware upgrade to it ,but its ends with failed registration.Can you please send me a sample for sccp.conf configuring cisco 7902. Thanks -- SCCP: Accepted connection from 192.168.5.163 -- SCCP: Using ip 192.168.5.228 -- SCCP: Accepted connection from 192.168.5.16...

On Tue, 9 May 2006, Nick Lewycky wrote: > For an analysis pass, I'm interested in reading the lattice values > calculated by SCCP. Should I split the current SCCP optimization into an > analysis piece and the optimization that depends on it, so that I can > use its analysis results? SCCP is already split into an SCCPSolver class that is used by the SCCP and IPSCCP classes. You should just be able to use SCCPSolver....

On Tue, 9 May 2006, Nick Lewycky wrote: >> You could do that, but SCCPSolver isn't really useful to mainline LLVM >> for anything other than SCCP and IPSCCP, so we don't need it in a public >> header. Out of curiosity, what are you looking to use the latice values >> for? Why not just run SCCP and then look at the transformed code? > &gt...

Chris Lattner wrote: > On Wed, 10 May 2006, Nick Lewycky wrote: > >>> Then just run the SCCP pass, and check to see if any operands satisfy >>> the predicate "isa<UndefValue>(V)". LLVM explicitly represents >>> undefined values. >> >> >> I have a case where it doesn't, but perhaps the SCCP pass isn't to blame: >> >>...

...nd can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk SVN-trunk-r7498 chan_sccp-20060207 [general] servername = asterisk keepalive = 60 debug = 10 context = from-sccp-internal dateFormat = M/D/YA port = 2000 disallow=all allow=alaw allow=ulaw allow=g723 firstdigittimeout = 60 digittimeout = 8 autoanswer_ring_time = 0 autoanswer_tone = 0x32 remotehangup_tone = 0x32 transfer_t...