search for: sc440

I have a Dell SC440 with Centos and Asterisk 1.4.21 and a card openvox D110PG, T1, when a person calling from the PTSN will listen to them but then begins to distort the voice I heard that name. I probe the card in another computer and it works perfectly. Anyone has any idea or help. I'm going crazy with this prob...

For anyone looking for a cheap home ZFS server... Dell is having a sale on their PowerEdge SC440 for $199 (regular $598) through 11/12/2008. http://www.dell.com/content/products/productdetails.aspx/pedge_sc440?c=us&cs=04&l=en&s=bsd Its got Dual Core Intel? Pentium?E2180, 2.0GHz, 1MB Cache, 800MHz FSB and you can upgrade the memory (ECC too) to 2gb for 19$ bucks. @$199, I just or...

Does anyone on list have experience with Digium hardware in the following servers: Dell poweredge SC440 IBM xSeries x226 Have just had major hassles getting TE205P ISDN cards going in these boxes. No joy so far. Anyone managed to do it yet? Thanks. Mark

What cpu/memmory configurations have people had good luck with for a small office asterisk server... (polycom's/poe linksys) Dell's got their $200 SC440 going again until the 12th... and I'm thinking it might be just the ticket...

Hi all. I have a Dell SC440 running Centos 4.4. It has two 500GB disks in a RAID1 array using linux software raid (md1 is / and md0 is /boot). Recently the root file system was remounted read-only for some reason. The logs don't show anything unusual, presumably the file system was read-only before anythng was logged. Run...

Hi all, We are using - a dell sc440(Single dual-core intel xeon 3040, 1.86GHz,1066MHz front size bus 2MB cache) as the asterisk server - dell 400sc(Intel P4) as a SER server - digium isdn card, TE120P at Asterisk server - Bandwidth: 2Mbps/512kbps All SIP Phones are registered to SER server, and SER will route all outgoing calls to A...

...ely. I installed a phone system for a friend a few weeks ago, and they're having a problem that I can't get rid of, actually 2 problems. Before I go into the problems, let me tell you about the setup. It's a pretty small setup with only 4 handsets, all Polycom 320s, the server is a Dell SC440 with Intel E2180 CPU (dual core, 2GHz) and 512MB Ram. Internet Connection is an ADSL2, with a not so reliable ISP in australia. For incoming calls, I had a Digium TDM410P with 4xFXO modules and HWEC. Because of these problems, i replaced the Digium card with a Sangoma A200D, but it didn't make...

Perhaps someone with more experience can help me solve this puzzle: Asterisk 1.4.18 on a Dell PowerEdge SC440, CentOS 5, 2.6.18-53.1.14.el5, Digium TDM400 with 3FXO(1-3) and 1FXS(4) Phone service is provided by XO Communications via their XOptionsFlex service (5 analog lines, 3 of which are used by Asterisk). For simplicity I refer to them as xx43, xx44, and xx45 - based on their phone numbers. They are c...

...a new installation of CentOS release 5.3 (Final) and have installed both <http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.1.1.tar.gz>Asterisk 1.6.1.1 and subsequently Asterisk 1.6.0.10 (thinking that I was maybe trying to be too cutting edge) on a Dell PowerEdge sc440 server (nothing complex - Pentium Dual core 2ghz - 1gb ram - 70gb sata hd). The setup at this point is real simple with one Cisco 7960 phone registering with Asterisk using Skinny. I'm finding that simple things as pressing any of the buttons on the phone is enough to cause Asterisk to ran...

...sed codecs? G729 will quadruple you call capacity. What sort of QoS and traffic shaping do you use? Note that these are separate matters, and you need both. Michael --Original Message Text--- From: jorain Date: Thu, 6 Dec 2007 17:47:18 +0800 Hi all, We are using - a dell sc440(Single dual-core intel xeon 3040, 1.86GHz,1066MHz front size bus 2MB cache) as the asterisk server - dell 400sc(Intel P4) as a SER server - digium isdn card, TE120P at Asterisk server - Bandwidth: 2Mbps/512kbps All SIP Phones are registered to SER server, and SER will route all outgoin...

...oc=bednv4k&s=bsd > > I wonder if anyone has any experience with this box and Digium or Sangoma > hardware? Any compatibility issues? If not, I might stock up on them. Wow - that *is* a great price. I don't have any of this particular box in production, but I do have 2 PowerEdge SC440s (one step up from the T105) running asterisk along with Sangoma PRI cards. They're working great. I really only have two issues with these low-end servers: 1. You can't order 'em with RAID support. I'm getting around this by using software RAID1 in linux, but I'd much prefer...