search for: sb600

...sdev,ip_tables bridge 60060 1 xt_physdev lspci lspci 00:00.0 Host bridge: ATI Technologies Inc Unknown device 7910 00:01.0 PCI bridge: ATI Technologies Inc Unknown device 7912 00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7917 00:12.0 IDE interface: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Tec...

...ormation that I haven't found on it is how to create a custome install DVD with added kernel modules -- e.g. when the standard install DVD does not support the motherboard chipset (SATA drives & network cards not recognized, for example) and network card. I have an AMD ATI motherboard with SB600 chipset. When I tried to install the RH5.2 trial, I could not get Internet connectivity either with the onboard network chip (the network chip was recognized, but not the SB600 chipset interface) or with an Intel server net- work card (seems that the Intel driver in 5.2 does not support that networ...

...n => s,10,Wait(1) exten => s,11,SIPAddHeader(Alert-Info: info=bellcore-r4) exten => s,12,Dial(SIP/600&SIP/602&SIP/603,60,tm) exten => s,13,Set(_ALERT_INFO=) exten => s,14,Dial(SIP/604,60,tm) exten => s,15,Voicemail(su600) exten => s,16,Hangup exten => s,115,Voicemail(sb600) exten => s,116,Hangup As you can see, #13 is deprecated, so extension 604 does not ring. Extension 600, 602 and 603 are all hooked up to Sipura ATAs and need the bellcore-r4 ringtone to differentiate from other incoming lines. Any ideas? Thanks Nikhil Jogia

hello, yet another powerd SOS : on an ASUS M3A78-EM MB with Phenom 9750 and 8 gig memory, starting powerd freezes the box after slowing down a bit cpu frequency. [IMHO] usefull bit of info : FreeBSD m34.scito.local 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Thu Dec 11 14:24:39 CET 2008 root@m34.scito.local:/usr/obj/raid1/bsd/src7/sys/M3A78-EM amd64 CPU: AMD Phenom(tm) 9750 Quad-Core

...erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SB600_PATA: IDE controller at PCI slot 0000:00:14.1 GSI 16 sharing vector 0xC1 and IRQ 16 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193 SB600_PATA: chipset revision 0 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hd...

...O multiplexer device installed. rtc_cmos 00:03: setting system clock to 2010-05-11 19:21:32 UTC (1273605692) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1: softreset failed (device not ready) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata3: softreset failed (device not ready) ata3: applying SB600 PMP SRST workaround and retrying ata1: applying SB600 PMP SRST workaround and retrying ata4: softreset failed (device not ready) ata4: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 3...

...latter speed", as advertised, wow) I used disks with 250GB-platter (Samsung HD753LJ; they have even higher density 640GB and 1TB models with 334GB/platter but they are respectively impossible to find or too expensive). I put 4 disks on the motherboard''s integrated AHCI controller (SB600 chipset), 2 disks on a 2-port $20 PCI-E 1x SiI3132 controller, and the 7th disk on a $65 4-port PCI-X SiI3124 controller that I scavenged from another server (it''s in a PCI slot, what a waste for a PCI-X card...). The rest is also dirty cheap: $65 Asus M2A-VM motherboard, $60 dual-core...

...erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SB600_PATA: IDE controller at PCI slot 0000:00:14.1 GSI 16 sharing vector 0xC1 and IRQ 16 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193 SB600_PATA: chipset revision 0 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hd...

...1 : pstate 1 (1800 MHz) powernow-k8: 2 : pstate 2 (1300 MHz) powernow-k8: 3 : pstate 3 (800 MHz) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Prot...

...0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] And a few lines from pciconf: atapci0@pci0:0:18:0: class=0x01018f card=0x73271462 chip=0x43801002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 Serial ATA Controller' class = mass storage subclass = ATA ...so - this is where I'm at. Interrupt storm raises through the roof in just 3 days, and continues to raise. Just for kicks I tried disabling AHCI with nextboot, but that made the box not boot. Also - I'm 1000 KM. away fr...

Hello, I am building a home file server and am looking for an ATX mother board that will be supported well with OpenSolaris (onboard SATA controller, network, graphics if any, audio, etc). I decided to go for Intel based boards (socket LGA 775) since it seems like power management is better supported with Intel processors and power efficiency is an important factor. After reading several

This is my first post here, and i hope it is ok that i posted in this thread. I have been doing a bit of reading on the solaris platforms, and seem to be inclined to try out the open solaris os or solaris 10. My only worry is that my lack of knowledge with the command line may make this difficult regarding trouble shooting. It seems fairly straighforward creating zpools etc, but maybe nexenta is

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the

...er> mem 0xfe9fa000-0xfe9fafff irq 18 at device 19.4 on pci0 usbus4 on ohci4 usbus4: bpf attached ohci4: usbpf: Attached ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9ff000-0xfe9ff0ff irq 19 at device 19.5 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56 ehci0: AMD SB600/700 quirk applied ehci0: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5 on ehci0 usbus5: bpf attached ehci0: usbpf: Attached pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0...

I''m a fan of ZFS since I''ve read about it last year. Now I''m on the way to build a home fileserver and I''m thinking to go with Opensolaris and eventually ZFS!! Apart from the other components, the main problem is to choose the motherboard. The offer is incredibly high and I''m lost. Minimum requisites should be: - working well with Open Solaris ;-) -