Hi All I have just upgraded from Asterisk 1.2 to 1.4 and am having trouble with with one of my ATAs not ringing. Basically, when I execute the Dial command, an error occurs: "Got SIP response 400 "In alert-info header: Empty value expected" Now in 1.2, I just issued the following command to overcome this problem: Set(_ALERT_INFO=). Now in 1.4, _ALERT_INFO is deprecated, so I have to use SIPAddHeader, but I don't know how, or if there is a way to remove the alert-info header. Here is my dialplan snippet: exten => s,9,Playback(my-greeting) exten => s,10,Wait(1) exten => s,11,SIPAddHeader(Alert-Info: info=bellcore-r4) exten => s,12,Dial(SIP/600&SIP/602&SIP/603,60,tm) exten => s,13,Set(_ALERT_INFO=) exten => s,14,Dial(SIP/604,60,tm) exten => s,15,Voicemail(su600) exten => s,16,Hangup exten => s,115,Voicemail(sb600) exten => s,116,Hangup As you can see, #13 is deprecated, so extension 604 does not ring. Extension 600, 602 and 603 are all hooked up to Sipura ATAs and need the bellcore-r4 ringtone to differentiate from other incoming lines. Any ideas? Thanks Nikhil Jogia
Does SIPAddHeader(Alert-Info:) not do it? On 3/12/07, Nikhil Jogia <nikhil@nikhiljogia.com> wrote:> Hi All > > I have just upgraded from Asterisk 1.2 to 1.4 and am having trouble with > with one of my ATAs not ringing. > > Basically, when I execute the Dial command, an error occurs: "Got SIP > response 400 "In alert-info header: Empty value expected" > > Now in 1.2, I just issued the following command to overcome this > problem: Set(_ALERT_INFO=). > > Now in 1.4, _ALERT_INFO is deprecated, so I have to use SIPAddHeader, > but I don't know how, or if there is a way to remove the alert-info header. > > Here is my dialplan snippet: > > exten => s,9,Playback(my-greeting) > exten => s,10,Wait(1) > exten => s,11,SIPAddHeader(Alert-Info: info=bellcore-r4) > exten => s,12,Dial(SIP/600&SIP/602&SIP/603,60,tm) > exten => s,13,Set(_ALERT_INFO=) > exten => s,14,Dial(SIP/604,60,tm) > exten => s,15,Voicemail(su600) > exten => s,16,Hangup > exten => s,115,Voicemail(sb600) > exten => s,116,Hangup > > As you can see, #13 is deprecated, so extension 604 does not ring. > Extension 600, 602 and 603 are all hooked up to Sipura ATAs and need the > bellcore-r4 ringtone to differentiate from other incoming lines. > > Any ideas? > > Thanks > > Nikhil Jogia > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Bruce Nortex Networks
Bruce Reeves wrote:> Does SIPAddHeader(Alert-Info:) not do it? > >No, but from another thread, setting the _SIPADDHEADER variable works.
12 mar 2007 kl. 23.33 skrev Nikhil Jogia:> Bruce Reeves wrote: >> Does SIPAddHeader(Alert-Info:) not do it? >> >> > No, but from another thread, setting the _SIPADDHEADER variable works.You misunderstand. The prefered way is to use SIPAddHeader(Alert- Info: slakfj aslkfjaklsdf) But in the situation of the manager call setup used in the other mail, that was not possible. /O