search for: rudolfl

Hi, all Here is a something I found on the web: http://www.voipbuster.com And it works OK too. Now, I want to use it via asterisk, so I ccan use my normal phones instead of PC application. Did anyone try to connect astersisk and VoipBuster? Thanks, Rudolf

Hi, all Where can I get "Asterisk Developer's PCI Kit" in Australia? It is a TDM400P with 1FXS and 1 FXO module. I amight need an extra FXS module as well. Thanks, Rudolf

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

Hi, all I am still battling to connect * and voipbuster. What protocol does it use? Ethereal capture shows UDP traffic, but no SIP or IAX traffic when using their client. VoipBuster client connects to connectionserver.voipbuster.com on port 11112 for authentication. Call itself is placed on different server. I have tried to connect using SIP and IAX and it seems that no authentication is

...em sending voice through them. Certainly, modem will be cheaper option then dedicated cards. Am I missing something? /*******************************************************/ Rudolf Ladyzhenskii Senior Design Engineer Open Networks Pty. Ltd. Level 26, 35 Collins Street, Melbourne VIC 3000 e-mail: rudolfl.ladyzhenskii@opennw.com phone: +61 3 9656 5107 fax: +61 3 9656 5122 web: www.opennw.com /*******************************************************/

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4325 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030403/f8281e8a/attachment.gif

I have a number of Polycom phones to setup with my * server. For my initial few phones I hand wrote configs. Does anyone here who uses Polycom phones have some form of management utility for automating their setup? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc.

Hi all, We are in the process of selection IP Phones to work with our *new* Asterisk PBX. We want to buy 4 for something less than 1000$ but with a nice set of features to work with our mail box, lines, good sound quality, full duplex (and maybe speaker phone). Any suggestions for something with good voice quality and not much troubles to setup with Asterisk? Voici quality is the most

> Still trying to get NAT working. Try adding a canreinvite=no. Nabeel

...ose companies, but I have no idea on how good/bad those phones are. I really need some advise here. Thanks, Rudolf /*******************************************************/ Rudolf Ladyzhenskii Senior Design Engineer Open Networks Pty. Ltd. Level 26, 35 Collins Street, Melbourne VIC 3000 e-mail: rudolfl.ladyzhenskii@opennw.com phone: +61 3 9656 5107 fax: +61 3 9656 5122 web: www.opennw.com /*******************************************************/

Hi I seem to have installed the G729 codec properly but can't seem to get it to work .. in the Asterisk startup I see .. [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) == Detected 1 licensed G.729 transcoders WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator

Hi, all I am trying to set up voicemail. I've done it to the point where I can leave messages. How do I retrieve them? Actually I have few questions: 1. I want voice mail to be available at certain extension, say 100. How do I set it up so all users can call this number and get to their respective mailboxes. 2. How do I let users to create their own voicemail passwords from the phone? 3.

Hi, all, I got my * to work with voipbuster service. And it works quite well when I am calling USA or Europe. However, for local calls, I am experiencing long delays (About 1s). As far as I know, voipbuster application does not have this problem. I am using IAX and gsm codec. Any ideas on how to combat this? Thanks, Rudolf

Hi, all I have couple of SIP phones and they are in [from-sip] context. I also have an IAX2 phone. I have put this one in [iax-user] context. I want to make calls between SIP and IAX2 phones. If I put them all in same context all is fine, however when they are in different contexts they will not call each other and I will get message (in * CLI) that particular extension does not exist in a

Hi, all I am setting up Asterisk for the first time and have some problems. Setup is very simple -- Astersik box and two Polycom SP300 phones. I will add bells and whistles as I go, at the moment things are very simple. No TFTP servers, so phones run with their default configuration. I set up IP addresses, netmask and gateway IPs manually on the phones. Now, I have read of problems with

Hi, all I want voicemails to be delivered to recepients by e-mail. I have set up voicenail, and I can see asterisk is using sendmail to send messages out. Using Ethereal, I can see that messages are leaving my network, but receipeint mail server never replies back. As a result, mail delivery is timed out. I got a book on sendmail and it looks quite complex. It will take quite a bit of time

Hi, all I have installed TDM400 card. I can see it is there (lspci). But Asterisk does not find it. phonebox2*CLI> zap show status No Zaptel interface found. I assume that driver is not loaded, but I am sure I have installed it (I compiled zaptel and then re-build asterisk and did make install for both zaptel and asterisk). When asterisk is started I get: Jan 2 06:28:08 WARNING[3473]:

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf