search for: router's

Hi all, Does any one know if this is normal operating of ARP. Or where to start looking. I am seeing a lot of ARP requests for my router IP from the same IP within seconds. 21:04:41.112929 arp who-has IP tell MY ROUTERS IP 21:04:41.186354 arp who-has IP tell MY ROUTERS IP 21:04:41.372972 arp who-has IP tell MY ROUTERS IP 21:04:41.546921 arp who-has IP tell MY ROUTERS IP 21:04:41.640253 arp who-has IP tell MY ROUTERS IP...

I am running tinc v. 1.1pre (truly as I read somewhere, ?one of the internet?s best kept secrets?) on some consumer home routers flashed with tomato firmware. I have a whole network of these, but for the purposes of this question I will focus on just three Router A (subnet 192.168.5.0/24) is connected via a standard tinc ?router? mode network with Router B (subnet 192.168.15.0/24). Router B, in addition to its connection...

Hello. I'm running RH 7.1, with Samba 2.2.2. VERY often I get a SIGHUP to smbd and it'll dump the workgroups. I also get a "Discarding datagram from IP 216.202.200.103. Source name ROUTER<00> is one of our names" all the time also. This line FILLS my logs. I don't understand this one, because I have the interfaces line specified in smb.conf to use only the local interface. The 216 one is a public interface. Here's a snipet from my logs, and I'll post my smb.c...

> On Jun 4, 2015, at 5:52 PM, Etienne Dechamps <etienne at edechamps.fr> wrote: > > Are you sure B is correctly configured to forward packets at the layer > 3 level between the interface of the "router" tinc and the interface > of the "switch" tinc? (iptables, etc.) > No, I am not sure about this and I think this is what I don?t understand properly (and where I am missing something in my config). For me conceptually, I expect the link with Router C (switch) to be the same t...

Are you sure B is correctly configured to forward packets at the layer 3 level between the interface of the "router" tinc and the interface of the "switch" tinc? (iptables, etc.) On router B, are you sure the node file for B on the "router" tinc is configured to announce the entire 192.168.15.0/24 subnet (i.e. Subnet = 192.168.15.0/24)? Otherwise B won't get the packets destined for...

I have a rather unusual setup within which I'd like to run samba. At this point I have: a) 3 networks (all private IP's) b) net1, net2 are interconnected by a router. net1 has a host that also acts as a WINS server and is local master, domain master, preferred master for it's group. (linux slack7.0, samba 2.0.5) router between net1, net2 has an IP in each network and samba configured on both interfaces. local master for it's own group, and configured...

I am setting up 2 Vyatta routers that will serve as redundant failover core routers out to the backbone of our ISP. They will be serving for routing between other branches and the ISP and bandwidth management. I am trying to differentiate between the plethora of information about having redundant, automatic failover routers and...

I'm running a Linksys WRT54GL router from my CentOS-7 home server. Every now and then (maybe once every 2 days) the router's WiFi cuts out, and I've found no way to solve this except to disconnect the power from the router, wait 10 seconds and then re-connect. This always works. The router is running under dd-wrt. My question...

Hi, Does anybody else have problems like this. I'm in the UK with a 1mb ADSL service from Eclipse. I have a Draytek Vigour 2600 ADSL router. My * box is configured with a public IP address which is presented on one of the switch ports on the rear of the router. When there is some SIP activity, incoming mainly, towards my * box, the router will lockup after a short period?! I've tried upgrading firmware in the router but it still l...

...via his IP:Port mechanism, but problem is that the audio data is not reaching to dialed user. here is the scenario. caller and callee both are registered at asterisk server. asterisk server is on public ip so no port forwarding and natting necessary there. however caller and callee both are behind router and there is port forwarding enabled and nat=yes, qualify=yes in sip.conf for both users. callee user name: adf callee local ip/port: 192.168.0.10:5678 callee router ip: 116.79.x.x when we simply dial callee as Dial(SIP/adf) RTP stream reaches perfectly fine to 192.168.0.10...

Hi all, I have a Linux box with two connections to the internet over two routers and a private internal network. The linux box does masquerading. internet +----------+ 172.16.0.1 +-------------------+ <---- | Router 1 |-------------------| | +----------+ | 172.16.0.2 | |...

Hi, We are having an issue here. It seems that whenever we initialize Asterisk on our network, the router that the Asterisk server is connected to (Cisco 7200) crashes and loses it configuration. This has happended five times and each time we have tested it, it is always when Asterisk starts up. Has anyone else seen this problem? It is very odd because this is a very good router and we had the Aste...

I found the response below today online to a question I had. For some reason I never got the mail. I am not quite clear on what "DHCP + DFG + 2DNS entries" means when calculating the IP to set for the router: Thanks Re: [CentOS] Yum/WGET/HTTP sourceforge etc. new April 12, 2010 08:10AM On Sun, 2010-04-11 at 22:57 +0000, tony.chamberlain at lemko.com wrote: > Here is what I tried. When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. > Same with Com...

Hi all, I am using a redhat 8.x linux box configured with zebra routing software which is also configured with ospfd I have 2 backbone routers running ospf connected to different isp''s I have 3 local routers also running ospf within themselfs and also with the 2 backbone routers (all are linux boxes) router A - backbone router 1 router B - backbone router 2 router C - local router 1 (has 3 subnets routed via it) router D -...

Hello, I am trying to figure out a problem I'm having using CentOS on a machine as a router. The short story is: any traffic routed through the router seems to get disconnected at random occasionally. The hardware setup is: I have two switches, the router sits between them, the webserver on the LAN switch. The machine I'm using for the router is a Dell 860 1U rackmount with two NI...

...e here a larger vpn (about 30 subnets) at time with OpenVPN. OpenVPN only supports PointToPoint connections so the setup is complex. Many transport Networks, many routes. The examples from your Webpage are nice, but i think a nicer way to use the strengh of tinc is: We define a Subnet where all routers are, for example: 172.120.121.0/24 With tinc its now easy to configure this on every router, so all routers are fully connected. Router A gets, 172.120.121.1 Router B gets, 172.120.121.2 Router C gets, 172.120.121.3 . . so we only have to add to every router these Adresse in its Subnet List,...

The situation is this: INTERNET -- ROUTER -- ETHERNET+WIFI -- PC's The conection between INTERNET and ROUTER is done with 2 LINKs with static IP's. The conection between ROUTER and PC's is done via ETHERNET lan with many bridges and ACCESSPOINTS. The PC's are in a IP subnet, the BRIDGES in another IP subnet, the AP's...

Hi folks, I need to develop asyncronous connection just like in DVB Satellite One Way Service, in my network. Incoming traffic and Outgoing traffic flowing through different link and interface. Here i describe you more, Existing system: [ Router A ] eth0 : 192.168.0.1 | | | | eth0 : 192.168.0.2 [ Router B ] Router A and Router B on the same network 192.168.0.0/30 Router A set route to network 192.168.1.0/24 goes to 192.168.0.2 And my plan is to split the system like this, Split system:...

On Tue, 06 Jun 2017 21:53:00 +0100 Rodolfo Medina <rodolfo.medina at gmail.com> wrote: > Rowland Penny via samba <samba at lists.samba.org> writes: > > This is with my router: > > > > rowland at devstation:~$ sudo mount.cifs //192.168.0.1/USB1 /mnt/cifs > > Password for root@//192.168.0.1/USB1: <-- I just pressed 'Enter' > > rowland at devstation:~$ ls /mnt/cifs > > home PVR RunSanDiskSecureAccess_Win.exe SanDiskSecureAccess &...

...Penny via samba <samba at lists.samba.org> writes: > > > On Tue, 06 Jun 2017 21:53:00 +0100 > > Rodolfo Medina <rodolfo.medina at gmail.com> wrote: > > > >> Rowland Penny via samba <samba at lists.samba.org> writes: > >> > This is with my router: > >> > > >> > rowland at devstation:~$ sudo > >> > mount.cifs //192.168.0.1/USB1 /mnt/cifs Password for > >> > root@//192.168.0.1/USB1: <-- I just pressed 'Enter' > >> > rowland at devstation:~$ ls /mnt/cifs home PVR > >...