search for: rj12

...5. I suspect it is the serial version as the label next to the RJ11 stands "com port", but I can't be 100% sure. MGE Ellipse serial cable pinout can be found here: http://eu1.networkupstools.org/cables/mgeups.html I tried making the cable, but the pin numbering on the modular jack (RJ12) wasn't clear on the page so I tried it both ways. Neither seems to work for me. Which way is the right way? I may need some help resolving this. Trying minicom on /dev/ttyS0 with 2400 bps 8n1 I can see that anything I type, gets echoed back character by character (in both pin configurations...

Hello! I've been following this list for several weeks now and would like to purchase some hardware for a VOIP/ voice-mail solution. This card appears strikingly similar to a modem. Is it? Is there a product to bring in more than one POTS line short of a full T1? It just seems silly that the technology hasn't advanced any further than to have a single line per card. Any thought

Anybody using Siemens optiPoint 300 H.323 phones? I saw a few references to them in the archives of this list, and the Wiki seems to be down. I have a chance to pick up a bunch of these, cheap. Questions: * Asterisk support? * What sort of power supplies will they need? The bunch I am looking at are surplus and have no supplies. Thanks, </edg> Ed Greenberg San Jose, CA

Hi I'm looking for a pinout for the above. Note this has what i'd call RJ45 sockets (or someone smart can correct me). I need to plug into BT (rj13?). And, yes I've googled (glad I'm not chinese) and have tried the suggested, just plug in a 6 connector rj11 and i didnt work atall. On a side note, I cannot beleive that Digium dont have this information on there site, it

...y're meant to protect are suposed to shut themselves down within 90 seconds, without fail. If I can find a way to alter this timeout I think it would make a great UPS. Until i get some time to do it I thought I'd share what I've learnt. It has a serial interface in the form of a RJ12 connector. Pinout: 1: GND 2: 3: 4: 5: Rx on Host 6: Tx on Host I think the other pins are used for simple level signals. Invalid commands are met with a "?" responce. >From the firmware in the PIC uController I've discovered the following commands (the "?" is part of t...

...ith the RJ-11 or 12 plugs on both LAN's. The pinout is undocumented in the extremely brief manual that comes with the LB-300 so straight-through on all pins was used. Undoubtedly, it follows the telco standard of the middle pins, but this is untested. Plug the freshly-terminated plugs into the RJ12 port on the LB-300. Once you are done, use 1 metre patch cables to plug the RJ45 ports on the LB-300 into eth1, eth2, and eth3. Make sure the switch on the LB-300 is set to "Loc" (LOCAL) on the source LAN's LB-3090's and "Rmt" (REMOTE) on the destination LAN's LB-30...

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

Hi I looking a good IAX service for a *emerging * voip provider. Better with a test account to try. Thanks in advance. roberto -- Ing. Roberto Pereyra ContenidosOnline Servidores BSD, Solaris y Linux Soporte t?cnico ISPs Jabber ID: rpereyra@lugmen.org.ar For reliable and professional DNS, use DNS Made Easy! http://www.dnsmadeeasy.com/u/14989 -------------- next part