search for: rhgb

If I boot with "rhgb quiet" off, my computer boots in 1 minute and 30 seconds. If I boot with "rhgb quiet" on, my computer boots in 3m11s. That's a long time to wait. Significantly, when booting with "rhgb quiet", right at the moment X takes over, there is a 1m36s pause where the scree...

Hello I have installed Centos-4.1 and love it over Fedora or Mandriva. A big thank you to all the hands and minds that have put together a very good distribution. However I do have a problem when I boot with rhgb enabled in grub.conf. The system hangs at the end loading IE(when the bar is full). I can get bye in either of two ways. The first is to switch to a virtual console before the system hangs and the other is to remove the rhgb option in grub.conf. I would ask for any comments on how to trouble sho...

...sion ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/md0 default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-194.11.1.el5PAE) root (hd0,0) kernel /vmlinuz-2.6.18-194.11.1.el5PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet crashkernel=128M at 16M initrd /initrd-2.6.18-194.11.1.el5PAE.img title CentOS (2.6.18-194.11.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-194.11.1.el5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet crashkernel=128M at 16M initrd /initrd-2.6.18-194.11.1.el5.img titl...

...edited with vi. What can I do to get this parameter in my kernel boot line. Jerry ----------------- default=0 timeout=5 splashimage=(hd0,0)/boot/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=LABEL=/ rhgb quiet pci=nomsi initrd /boot/initrd-2.6.18-164.11.1.el5.img cat /proc/cmdline ro root=LABEL=/ rhgb quiet dmesg | more Linux version 2.6.18-164.11.1.el5 (mockbuild at builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010 Command line:...

...; parameters >> pressing 'e' in the grub menu and adding "i915.modeset=0 >> rd.driver.blacklist=i915", booted and system works. >> >> So I tried to make this permanent updating grub configuration adding >> the >> previous directives (and removed rhgb and quiet) to >> /etc/default/grub >> and run grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg. >> >> Reboot the system and checked again kernel parameters on grub menu >> and >> seen that nothing changed. Booted and freezed. >> >> I checked /boot/efi/...

...fig). If these don't give hits, then it's time to build a kernel for your hardware and desires, switching 'microcode' stuff off. Brian Brunner brian.t.brunner at gai-tronics.com (610)796-5838 >>> dave at tokyocomedy.com 09/12/05 09:31AM >>> If I boot with "rhgb quiet" off, my computer boots in 1 minute and 30 seconds. If I boot with "rhgb quiet" on, my computer boots in 3m11s. That's a long time to wait. Significantly, when booting with "rhgb quiet", right at the moment X takes over, there is a 1m36s pause where the scree...

...kernel /boot/xen.gz-2.6.17-1.2187_FC5 module /boot/vmlinuz-2.6.17-1.2187_FC5xen0 ro root=LABEL=/ quiet module /boot/initrd-2.6.17-1.2187_FC5xen0.img title Fedora Core (2.6.17-1.2187_FC5xenU) root (hd0,0) kernel /boot/vmlinuz-2.6.17-1.2187_FC5xenU ro root=LABEL=/ rhgb quiet initrd /boot/initrd-2.6.17-1.2187_FC5xenU.img title Fedora Core (2.6.15-1.2054_FC5smp) root (hd0,0) kernel /boot/vmlinuz-2.6.15-1.2054_FC5smp ro root=LABEL=/ rhgb quiet initrd /boot/initrd-2.6.15-1.2054_FC5smp.img timeout=5 splashimage=(hd0,0)/boot/grub/splash...

...d below. I am using the following entries in the grub.conf file: title Xen-bhatia 3.0 / XenLinux-bhatia 2.6.16 root (hd0,0) kernel /bhatia/boot/xen-3.0.gz dom0_mem=262144 console=ttyS0,9600n8 console=tty0 module /bhatia/boot/vmlinuz-2.6-xen root=/dev/VolGroup00/LogVol00 rhgb quiet console=ttyS0,9600n8 console=tty0 title Xen 3.0 / XenLinux 2.6.16 root (hd0,0) kernel /xen.gz dom0_mem=262144 console=ttyS0,9600n8 console=tty0 module /vmlinuz-2.6-xen root=/dev/VolGroup00/LogVol00 rhgb quiet console=ttyS0,9600n8 console=tty0 module /initrd-2.6...

...n done long ago). It *still* sits there when I reboot. Any clues, folks? mark grub.conf: #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-164.2.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-164.2.1.el5 ro root=LABEL=/ rhgb initrd /initrd-2.6.18-164.2.1.el5.img title CentOS (2.6.18-164.el5) root (hd0,0) kernel /vmlinuz-2.6.18-164.el5 ro root=LABEL=/ rhgb initrd /initrd-2.6.18-164.el5.img <snip>

Hi, I installed 2.0.5 binary release of Xen in my FC3 , and below is my grub.conf ---- part of grub.conf -- title Fedora Core (2.6.10-1.766_FC3) root (hd0,7) kernel /vmlinuz-2.6.10-1.766_FC3 ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.10-1.766_FC3.img title Xen 2.0 / XenLinux 2.6.10 root (hd0,7) kernel /boot/xen.gz dom0_mem=131072 module /boot/vmlinuz-2.6.10-xen0 ro root=LABEL=/ rhgb quiet ---- While booting with Xen kernel , it stops at the very first step saying Error...

...root (hd1,1) # kernel /vmlinuz-version ro root=/dev/sda3 # initrd /initrd-version.img #boot=/dev/hdb default=1 timeout=5 splashimage=(hd1,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.9-42.0.3.EL) root (hd1,1) kernel /vmlinuz-2.6.9-42.0.3.EL ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.9-42.0.3.EL.img #title CentOS-4 i386 (2.6.9-42.ELsmp) # root (hd1,1) # kernel /vmlinuz-2.6.9-42.ELsmp ro root=LABEL=/ rhgb quiet # initrd /initrd-2.6.9-42.ELsmp.img #title CentOS-4 i386-up (2.6.9-42.EL) # root (hd1,1) # kernel /vmlinuz-...

...a standard, updatable 4.4 install onto my 4G Firefly, I am at a loss as to why I get the following errors: *************************************** Booting 'CentOS-4 i386 (2.6.9-42.EL)' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.9-42.EL ro root=LABEL=/ rhgb quiet [Linux-bzImage, setup=0x1400, size=0x16dd65] initrd /initrd-2.6.9-42.EL.img [Linux-initrd @ 0x1fefe000, 0x612ef bytes] Uncompressing Linux... Ok, booting the kernel. Red Hat nash version 4.2.1.8 starting mkrootdev: label / not found mount: error 2 mounting ext3 mount: error 2 mounting none s...

...by chance? There seems to be an > issue with the combination of: - Windows 10 1708 or newer. > - Hyper-V config version 8.2 - 9.0. > - Microsoft's Fix for Spectre and Meltdown. > - Newer Intel Hardware (Sandy Lake/Kaby Lake, etc.) > > The workaround seems to be to remove "rhgb" and "quiet" from the kernel > line in the GRUB config (you may need to edit the command line from the > grub menu before booting). <snip> Haven't been following this, but if this is a server, rather than a workstation, there is *zero* reason to have rhgb and quiet on...

...e and ran e2fsck on the /root partition. No errors came up and rebooting the box resulted in the same error! So I dug a little, and found that putting some comments in /etc/rc.d/rc.sysinit would circumvent *the error* and allow the box to boot. Here are the lines - (around line 375) if [ "${RHGB_STARTED}" != "0" -a -w /etc/rhgb/temp/rhgb-console ]; then fsck -T -a $rootdev $fsckoptions > /etc/rhgb/temp/rhgb-console else initlog -c "fsck -T -a $rootdev $fsckoptions" fi Here are the grub.conf boot settings: title CentOS (2.6.9-22.ELsmp) ro...

Hi! I know that the nvidia-drv-x11-package is from RPMForge, but I thought I might mention it here. I have a machine with a NVidia-card and because of the ease of use I use the rpmforge-package for that. After upgrading the problem was that during rebooting as soon as the machine hit the RHGB (which implicitly uses that driver) the machine froze. I booted into the old kernel removed rhgb, rebooted. Now the machine froze when starting X. Same procedure: Old Kernel. Remove nvidia-drv-x11. Reboot into the new kernel and reinstall nvidia-drv-x11. After a reboot everything works as it used t...

...is case I tried to boot centos changing grub kernel parameters pressing 'e' in the grub menu and adding "i915.modeset=0 rd.driver.blacklist=i915", booted and system works. So I tried to make this permanent updating grub configuration adding the previous directives (and removed rhgb and quiet) to /etc/default/grub and run grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg. Reboot the system and checked again kernel parameters on grub menu and seen that nothing changed. Booted and freezed. I checked /boot/efi/EFI/centos/grub.cfg and kernelops has the new directives. Seems th...

...t/xen.gz dom0_mem=1024M,max:1024M cpuinfo com1=115200,8n1 console=com1,tty loglvl=all guest_loglvl=all module /boot/vmlinuz-3.18.21-17.el6.x86_64 ro root=/dev/vda1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet title CentOS (2.6.32-573.12.1.el6.x86_64) root (hd0,0) kernel /boot/vmlinuz-2.6.32-573.12.1.el6.x86_64 ro root=/dev/vda1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet initrd /b...

...dev/md1 # initrd /initrd-version.img #boot=/dev/md0 default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-164.10.1.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-164.10.1.el5 module /vmlinuz-2.6.18-164.10.1.el5xen ro root=/dev/md1 rhgb quiet module /initrd-2.6.18-164.10.1.el5xen.img title CentOS (2.6.18-164.10.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-164.10.1.el5 ro root=/dev/md1 rhgb quiet initrd /initrd-2.6.18-164.10.1.el5.img title CentOS (2.6.18-164.6.1.el5) root (hd0,0)...

...oots. Also there is nothing on the > screen when I reboot. > > My /etc/default/grub is > > GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" > GRUB_DEFAULT=saved > GRUB_DISABLE_SUBMENU=true > GRUB_CMDLINE_LINUX="crashkernel=auto rhgb intremap=no_x2apic_optout" > GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=13312M,max:14336M dom0_max_vcpus=6 > dom0_vcpus_pin" > GRUB_GFXMODE=1024x768 > GRUB_GFXPAYLOAD_LINUX=keep > GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT="console=hvc0 earlyprintk=xen > nomodeset&qu...

...ith=scsi_mod --builtin=ata_piix initrd-2.6.18.8-xen.img 2.6.18.8-xen # cp initrd-2.6.18.8-xen.img /boot/ 7. configure grub: default=0timeout=10splashimage=(hd0,0)/grub/splash.xpm.gzhiddenmenutitle xen-dom0 kernel /xen.gz dom0_mem=2097152 module /vmlinuz-2.6.18.8-xen ro root=LABEL=/ rhgb quiet crashkernel=128M@16M module /initrd-2.6.18.8-xen.imgtitle Red Hat Enterprise Linux Server (2.6.18-53.el5) root (hd0,0) kernel /vmlinuz-2.6.18-53.el5 ro root=LABEL=/ rhgb quiet crashkernel=128M@16M initrd /initrd-2.6.18-53.el5.img8. reboot and wait... it says: ......