search for: rgs

...39;s a real-life issue with this simplistic DNS implementation. One of the domains here gained a few more domain controllers. And it turns out the DNS reply stopped fitting in single UDP packet. So named (9.18.19) stopped providing replies in UDP answer: $ dnsget -t srv -v _ldap._tcp.dc._msdcs.rgs.ru. -n 127.0.0.1 ;; trying _ldap._tcp.dc._msdcs.rgs.ru. ;; sending 56 bytes query to 127.0.0.1 port 53 ;; received 56 bytes response from 127.0.0.1 port 53 ;; warning: TC bit set, probably incomplete reply ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 101, size: 56 ;; flags: qr t...

I'm running Asterisk 1.0 RC2 on a RedHat 9.0 box. I have a ISDN BRI line that I would like hook up to my Asterisk server and would like to ask the group what you guys would recommend as far as isdn cards that install easily into the Linux and asterisk environment. Rgs, Mark

...I am currently running Trixbox 2.6 and I have a problem with Asterisk. /etc/init.d/asterisk status Asterisk dead but subsys locked I deleted all files in /var/run/asterisk folder and asterisk restart... It's ok for a while. But some days after Asterisk again is dead. Can anybody help me? Rgs / budacsik

Hi all, I have a small system of two hardware boxes (residential gateways) running Linux with Asterisk on them. Each RG has some FXS ports to which analog telephones can be connected. I already had a working system including an external SIP provider, where both RGs would register to that provider with a telephone number and they could call each other via that telephone number. Each RG had a line register => <telephone number>:<password>@sip.myprovider.com in sip.conf. I also included a section [mysipprovider] type=peer context=fromINTERNET hos...

...== Parsing '/etc/asterisk/sip.conf': == Parsing '/etc/asterisk/sip.conf': Found Aug 24 11:01:11 WARNING[1125329600]: acl.c:146 ast_get_ip: Unable to lookup '216.115.25.199:5061' when trying to register with the vonage sip proxy. Any examples would be greatly appreciated. Rgs, mark

How long does last week's security update remain in the test repo before it gets moved to release? Rgs Neil Wilson

...onical parameters, I use maginal probability instead of a and log odds ratio instead of b. and for the order higher than 3, I use the canonical way or even assume them to be 0. It is good if there is direct function or package in R to do the job, which will save a lot of time of me. Thank you! Rgs, Zhen

Hi, I have a little .swf movie I''d like to have in my page. Is there a rails way of linking it? Thanks, Peter

It is possible to connect ADTRAN TSU 600 VP24 FXO 24 Port Channel Bank to Asterisk ? Somebody offered me that hardware, but I do not know if thats good hardware for Asterisk. rgs, Bartosz -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030820/4a9e4608/attachment.htm

...rnel: (31259,0):o2hb_populate_slot_data:1299 ERROR: status = -5 Feb 9 18:11:42 tundra kernel: (31259,0):o2hb_region_dev_write:1399 ERROR: status = -5 The o2cb loaded successfully, but whet i run /etc/init.d/ocfs2 start/status i do not have an answer Can you help me? thank you for your attention Rgs -- Rafael Emerick Z. de Oliveira -------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-devel/attachments/20090209/279292ea/attachment.html

HI I'm need to run samba version 2.2.8 and 2 smbd / nnbd processes in a single machine with two separate smb.conf files . They will runs on individual interfaces and how can I do that ? Tried all means that I know off , but to no avail. Please help. Thanks & rgs amin ============================================================================== This message is for the named person's use only. It may contain sensitive and private proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If...

Hi All What, by definition, goes to the cdr table's "dst" column ?? In our setup, to get outside the user has to dial X before any number. This goes to the dst with the X stripped out. I recently made some changes in a macro and after that the X appeared in this dst column! I run through the script and see no differences between the old and the new one. Then the question: What,

...rce("convert.r") > convert("transf") Error in file(file, "r") : unable to open connection In addition: Warning message: cannot open file `transf.cgm' > ----------------------------------- Have i done some mistakes?Or i am missing some files? Please assist. Rgs, Orlando. [[alternative HTML version deleted]]

...me tinc.vpn[2918]: Sending ID to tls (81.13.33.158 port 655): 0 mjt 17 eh? This is the "latest git" trying to reconnect to the server after I restarted the server, in a hope to "fix" that "bad ANS_KEY". OOPS. 5) May 24 00:20:33 gnome tinc.vpn[2918]: Sending PING to rgs (212.176.17.70 port 655): 8 May 24 00:20:33 gnome tinc.vpn[2918]: Sending 2 bytes of metadata to rgs (212.176.17.70 port 655) May 24 00:20:33 gnome tinc.vpn[2918]: Got fatal signal 11 (Segmentation violation) May 24 00:20:33 gnome tinc.vpn[2918]: Trying to re-execute in 5 seconds... 6) see #2 aga...

...10ns/168pin SDRAM/PC 100 1000 ½ðÊ¿¶ÙKingston KVR133X64C3/256 SD256MB/168PIN/PC133 120 KVR133X64C3/512 SD512MB/168PIN/PC133 470 KVR133X72C3/128 ECC/SD128MB/PC133 140 KVR133X72C3/256 ECC/SD256MB/PC133 290 KVR133X72C3/512 ECC/SD512MB/PC133 690 KVR133X72RC3/128 ECC-RGS/SD128MB/PC133 150 KVR133X72RC3/256 ECC-RGS/SD256MB/PC133 340 KVR133X72RC3/512 ECC-RGS/SD512MB/PC133 780 KVR266*64C25/128 DDR128MB/184PIN/PC266 70 KVR266*64C25/256 DDR256MB/184PIN/PC266 110 KVR266*64C25/512 DDR512MB/184PIN/PC266 340 KVR266*72C25/256 ECC/DDR256/PC266 290 KVR266*7...

Can someone provide example configuration files and/or instructions for configuring Asterisk to work with chan_sccp2 and a 7960. I have the searched the chan_sccp2 site, the voip_info wiki site, asterisk doc project, and mailing list archives for the past year for help, but failed to find anything helpful. Some of the questions I have are: 1. What settings need to be made on the phone? 2.

Hi all, i'' m trying to configure puppet to use rails with postgresql. I'' m having troubles to make it work. Got no error when running puppetmasterd but nothing is being populated in the DB. Is anybody using puppet with postgres ? my config (in puppet.conf) [rails] dbadapter = postgresql dbname = mydb dbserver = localhost dbuser = user dbpassword = password

...Cs in a domain, which does not fit in UDP DNS packet, I found another interesting issue. winbindd generates a temporary krb5.conf for each realm it uses, and stores it in /run/samba/smb_krb5/krb5.conf.$REALM. Here's a typical such config in fully-automatic mode: libdefaults] default_realm = RGS.RU default_etypes = aes256-cts-hmac-sha1-96 aes128-cts-hmac-sha1-96 arcfour-hmac-md5 dns_lookup_realm = false dns_lookup_kdc = true [realms] FOO.BAR = { kdc = 10.221.1.98 kdc = 10.53.1.100 kdc = 10.45.1.100 kdc = 10.59.1.100 } These are addresses of 4 DCs winbindd found in _ldap._tcp...

Rob, I followed exactely what you suggested but still could''nt display the image, in the browser I get only a small icon if the image. Please help, Rgs, Chems -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060116/7f5892c1/attachment.html

to start with i am new to asterisks and i am also a telcom idiot. with that said i have one vonage line i would like to hook up in my soon to be built Asterisk ippbx server. Now with the one Vonage (with call waiting) line can i receive more one call using an auto attendant route the call the approiate extention? thanks mike