search for: rf5112

I seem to be able to lock my machine by going into wpa_cli and asking it to 'reassoc'. The reason for question mark after "hard" is that debug information (caused by wlandebug and athdebug) is being printed on the console. The only way to get machine's attention is to hold power button for 8 seconds. Note: manual reassociation is just the handy way to reproduce the problem

...0-STABLE, I don't know whether it works in -CURRENT. Over here I have the dmesg: http://junk.quis.cx/VNViVksv/blackbox.dmesg.txt I haven't compiled it in, it didn't boot that way (kernel panic iirc). When I kldload if_ath I get this: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: <Atheros 5212> mem 0xc9000000-0xc900ffff irq 18 at device 1.0 on pci5 ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 3 device_attach: ath0 attach returned 6 # pciconf -l | grep ath ath0@pci0:5:1:0: class=0x020000 card=0x2052168c chip=0x001a168c rev=0x01...

...CR8> real memory = 1073717248 (1023 MB) avail memory = 1037139968 (989 MB) MPTable: <_HVMCPU_ XEN > ioapic0: Changing APIC ID to 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at devi...

...(15.2 KiB) TX bytes:15568 (15.2 KiB) [root at wulmcent madwifi-0.9.4]# dmesg |grep ath5k [root at wulmcent madwifi-0.9.4]# dmesg |grep ath device-mapper: multipath: version 1.0.5 loaded ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath_pci: 0.9.4 -------------------------------------------------------------------------------- As the message displayed above, my system didn't find my wireless card. I don't know what to do to fix it. I need your help, thank you! ==== woo -------------- next part -------...

...res=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow!> real memory = 468647936 (446 MB) avail memory = 444530688 (423 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> po...

...ail memory = 1037139968 (989 MB) > MPTable: <_HVMCPU_ XEN > > ioapic0: Changing APIC ID to 1 > ioapic0: Assuming intbase of 0 > ioapic0 <Version 1.1> irqs 0-47 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard > pci0: <PCI bus> o...

...privacy OFF txpowmax 30 protmode CTS burst bintval 100 # ifconfig ath0 media DS/54Mbps ifconfig: unknown media subtype: DS/54Mbps # Any reason I can't bring it up to 54Mbps? Hardware indicates it should actually support it: ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: <Atheros 5212> mem 0xd8100000-0xd810ffff irq 28 at device 4.0 on pci10 ath0: Ethernet address: 00:0f:b5:20:71:ed ath0: mac 5.9 phy 4.3 radio 4.6 - Damian

...lan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (May 5 2008 11:42:16) hptrr: HPT RocketRAID controller driver v1.1 (May 5 2008 11:42:14) npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1...

...Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 536281088 (511 MB) avail memory = 510746624 (487 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cryptosoft0: <software crypto> on motherboard acpi0: <PTLTD Wistron> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on a...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard ioapic3 <Version 2.0> irqs 72-95 on motherboard ioapic4 <Version 2.0> irqs 96-119 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <HP P51> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACP...

...ssor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13) acpi0: <PTLTD XSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acp...

...89 MB) ACPI APIC Table: <INTEL D945GTP > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL D945GTP> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency...

...B) avail memory = 1037168640 (989 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Aug 11 2008 22:01:29) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0...

...08:59:41 kernel: AMD Features2=0x19<LAHF,<b3>,CR8> Jun 5 08:59:41 kernel: real memory = 518979584 (494 MB) Jun 5 08:59:41 kernel: avail memory = 498413568 (475 MB) Jun 5 08:59:41 kernel: kbd1 at kbdmux0 Jun 5 08:59:41 kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) Jun 5 08:59:41 kernel: acpi0: <Nvidia AWRDACPI> on motherboard Jun 5 08:59:41 kernel: acpi_bus_number: can't get _ADR Jun 5 08:59:41 kernel: acpi_bus_number: can't get _ADR Jun 5 08:59:41 kernel: acpi0: Power Button (fixed) Jun 5 08:59:41 kernel: acpi_bus_nu...

...cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic2 <Version 2.0> irqs 48-71 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: <IBM SERONYXP> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x58...

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

...to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 160-183 on motherboard ioapic2 <Version 2.0> irqs 224-247 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem...