search for: revs

Hi there, First off, despite this being my first post here, I have scanned the R help forums a lot in the past few months to help with some questions, so a big thank you to the community as a whole for being so helpful! I'm somewhat of an R newbie, and have run up against a problem that I can't seem to solve. If anyone is able to help I would really appreciate it! I'm looking at a

Hi Guys, In a bit of a pickle.. Is anyone running the latest "Centos 5.9" or earlier version with an Intel X79 based motherboard. I have a server which needs the motherboard replacing asap and I have a spare "Sabertooth X79". I have a machine with a "Sabertooth X79" motherboard to test on which boots up fine on on "Centos 5.9 i386" image from the

I would also like to help as well. As KMacy knows before i asked a lot of questions for T2 types of servers but unfortunately i have no more access to those kind of hardware as well. I;m willing to participate if a team will be formated.

Hi, I using on all server (FSC RX100S5) xen 3.3.1 and kernel 2.6.26-1 or 2.6.26-2,evrything it works good. Now I try using xen 3.4.0 with the same kernel but the system not up only go to the initramfs. I suspect that the kernel did not load the driver for the controller. The question just why it works on a Xen 3.3.1 does not work on 3.4 with the same versions of the kernel . Below I put

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid

On 09/29/2020 10:07 PM, John Pierce wrote: > try the camera in a USB 2 port, it should work just fine at usb 2 speeds. > most systems, the USB 3 ports hve a 'blue' tongue, while the 2 ports are > black or another color. > > On Tue, Sep 29, 2020 at 6:50 PM H <agents at meddatainc.com> wrote: > >> On 09/29/2020 09:09 PM, John Pierce wrote: >>> do

I sent an email out to freebsd-net without a response, soo this is my last attempt at getting any assistance here. I have a QLE3142-CU-CK (rebranded NetXen NX3-20GCU w/ NX3031 chipset) with no driver support in *BSD from anything I saw. I came across solaris's ntxn driver which seems to work appropriately but I have no use for solaris as a host o/s. Naturally I'll attempt at trying to get

On 09/29/2020 11:11 PM, Bruce Ferrell wrote: > On 9/29/20 7:21 PM, H wrote: >> kernel: usb 1-9: unable to read config index 0 descriptor/all > > Those error messages mean that the device isn't responding to the Get-Descriptor request. > > I think a step back and checking the usb subsystem, in general, might be a good idea: > > Let's start with the full output of

Greetings, I'm trying to add a virtual nic to an existing and active vm and I'm getting this error: error: internal error: No more available PCI slots the cmd I'm trying to run is: virsh -c qemu:///system attach-interface --domain router --type bridge --source virbr0 --model virtio --config --live the lspci output within the vm is this: # lspci 00:00.0 Host bridge: Intel Corporation

# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI

Hi all, I've installed CentOS 5.2 i386 (with all updates) on notebook Fujutsu Siemens Esprimo U9200 Suspending works normal, but after resuming my system crashes. There are no messages about that in /var/log/messages, only after reboot system I see in gnome: " Resume Problem Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

[+cc Intel folks] On Fri, Aug 31, 2018 at 03:30:57PM +0800, Daniel Drake wrote: > On over 40 Intel-based Asus products, the nvidia GPU becomes unusable > after S3 suspend/resume. The affected products include multiple > generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs > many errors such as: > > fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR]

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm

Hi, there! Every once in a while / about once a day I have nouveau for a Quadro NVS 290 failing in my system from about kernel 3.10...up to now 3.14, so I finally decided to report this bug as it gets really annoying. After the bug appears, there are some (one per DATA_ERROR line) small 20x20 to 40x40 pixel sized odd shaped white block artefacts stuck on my (dual monitor) desktop. After a restart

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hey dag, [...] I don't know if you saw it, we just created HDT's mailing list, if you want to join us, would be nice ;o) At least, I put the list on CC. > * The Chassis View has as Asset Tag something like > " Sa" > when highlighting I see it says " Safe" Fixed this morning by this commits :

Hi Phil Here it is: [root at totorbex ~]# lspci -nn .00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21) 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) 00:10.0 SD Host controller

Hi, I'm having lots of difficulties with BCM5719, which is the default network card of HP Proliant DL 360 G8 servers. I can get a few ping replies before I get a couple of these: bge0: watchdog timeout -- resetting bge0: watchdog timeout -- resetting Then everything hangs. Can not log in using ssh.

Hello all, I recently bought a brand new Dell Precision 7540 laptop.? Before buying I checked the specifications from the RedHat hardware list and they said that it was "fully RedHat 8 Certified" and listed all the hardware that was "certified" to work with that laptop. https://access.redhat.com/ecosystem/hardware/3979771 I have had good results the last few years with