search for: retrymaxcount

...t; reg.1.auth.userId="1006" reg.1.auth.password="" reg.1.server.dnsLookupOption="0" reg.1.server.1.address="192.168.0.90" reg.1.server.1.port="5060" reg.1.server.1.expires="" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" reg.2.displayName="1003" reg.2.address="1003@192.168.2.2" reg.2.label="1003" reg.2.type="private" reg.2.auth.userId="1003" reg.2.auth.password="" reg.2.server.dnsLookupOpt...

..." reg.1.server.1.transport="DNSnaptr" reg.1.server.2.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.expires.overlap="" reg.1.server.1.register="" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" reg.1.server.1.lcs="" reg.1.outboundProxy.address="" Any ideas would be welcomed. Thanks... ...Jim Gottlieb, San Diego, California

Hi All, Can someone please advise me about configuring my Polycom IP600? I have an account with a SIP based IP Centrex provider. The basic SIP info and line 1 config points to them. That's working fine. I'd like to register line 2 with my own asterisk server. I've tried putting the basic registration info in the line 2 configs...but the phone never registers. Not certain how to

...reg.1.server.1.port="5060" reg.1.server.1.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.expires.overlap="" reg.1.server.1.register="1" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" reg.1.server.1.lcs="" reg.1.outboundProxy.address="" reg.1.outboundProxy.port="" reg.1.outboundProxy.transport="" reg.1.acd-login-logout="0" reg.1.a...

...rt="5060" voIpProt.server.1.transport="DNSnaptr" voIpProt.server.1.expires="300" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxCount="0" voIpProt.server.1.expires.lineSeize="30" /> <SIP voIpProt.SIP.useRFC2543hold="1" voIpProt.SIP.lcs="0" voIpProt.SIP.sendCompactHdrs="0" voIpProt.SIP.WM50=&quo...

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

Hi, One of my users is in trouble with his polycom phone hooked to an asterisk server. The phone works fine for a few days, and then disappears from the registered sip peers in asterisk. The user is able to place outbound phone calls, but can't receive incoming calls until the network plug is unplugged/plugged. Working line XXYYZZAA24/XXYYZZAA24 10.50.5.186 D A 5060

....1.server.1.port="" reg.1.server.1.transport="DNSnaptr" reg.1.server.2.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.register="1" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" Phone's IP Info: IP is 192.168.0.160 IP Gateway: 192.168.0.1 SNTP: 192.168.0.5 DNS Server: 192.168.0.1 DNS Alternate: 192.168.0.5 Phone's Software: BootBlock: 2.4.0 Bootrom: 3....

...<server voIpProt.server.1.address="10.215.100.1" voIpProt.server.1.port="" voIpProt.server.1.transport="UDPonly" voIpProt.server.1.expires="3600" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxCount="0" voIpProt.server.1.expires.lineSeize="30"/> <SIP voIpProt.SIP.useRFC2543hold="1" voIpProt.SIP.lcs="0" voIpProt.SIP.sendCompactHdrs="0" voIpProt.SIP.WM50="0" voIpProt.SIP.keepalive.sessionTimers="0" voIpProt.SIP.req...

Hey all, I'll give my reseller a call for support in the morning, but I usually have better/faster luck on the list. I've got a SoundPoint IP500 that I upgraded to BootROM 2.6.2 and SIP image 1.5.2 on someone elses advice, I forgot to change out the old config for the new when I loaded the image up (I guess the config changed a bunch between 1.5.2 and 1.3.1) I was prompted with an error

Hi, I've been meaning to fix my non-working paging feature here for a while, and I've just spent the last 5 hours looking at many, many web pages that all say the same thing. I am using Asterisk 1.6.2.18 and Polycom phones, both older (501 with "latest" legacy 3.1.7 firmware) and newer (335 and 650 with latest 3.3.1f). I have changed the correct values in sip.cfg like

I'm trying to figure out how to allow an extension to register more than once. For instance, I have all of these 4 line IP phones that I use with Asterisk and I would like to have a persons extension (say 101) ring at all four lines so that if the person is on the phone they can take another call, but it appears as though if you try to register the same extension more than once then the most

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the