search for: requeue

...CLASSIFY set 48:1 0 0 CLASSIFY all -- * wivl4 0.0.0.0/0 0.0.0.0/0 MARK match 0x31 CLASSIFY set 49:1 wireless-r1 bwlimit # tc -s qdisc show dev wivl4 qdisc prio 5: bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 11887911 bytes 8179 pkt (dropped 878, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc htb 26: parent 5:1 r2q 10 default 1 direct_packets_stat 0 Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc htb 27: parent 5:2 r2q 10 default 1 direct_packets_stat 0 Sent 10657 bytes 162 pkt (d...

...is really big . The classes are 1:5 and 1:14... #########################################QDISC############################## root@srv1:/etc# tc -s -d qdisc show dev eth1 qdisc htb 1: r2q 10 default 20 direct_packets_stat 119 ver 3.17 Sent 825410989 bytes 1198046 pkt (dropped 20, overlimits 699638 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 10: parent 1:10 limit 128p quantum 2000b flows 128/1024 perturb 10sec Sent 975066 bytes 3184 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 11: parent 1:11 limit 128p quantum 2000b flows 128/1024 pe...

...es vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 25341476 bytes 45125 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc sfq 51: parent 5:1 limit 127p quantum 1875b flows 127/1024 perturb 10sec Sent 14106 bytes 253 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc sfq 52: parent 5:2 limit 127p quantum 1875b flows 127/1024 perturb 10sec Sent 25327370 b...

...width too, in other hand i need to classify the traffic by IP to show. This is an out of my "tc -s qdisc show": *********************************************************** qdisc htb 1: r2q 10 default 40 direct_packets_stat 0 Sent 935816543 bytes 791394 pkt (dropped 0, overlimits 117076 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 10: parent 1:10 limit 128p quantum 1500b perturb 10sec Sent 2385144 bytes 21890 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 20: parent 1:20 limit 128p quantum 1500b perturb 10sec Sent 61462218...

...add dev eth0 parent 1:0 prio 1 protocol ip u32 \ match ip dst 10.0.16.10/32 \ flowid 1:1 Status after pinging 10.0.16.10 a few times (notice traffic on 1:2, but not on 1:1): qdisc htb 1: r2q 10 default 2 direct_packets_stat 0 ver 3.17 Sent 516 bytes 7 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 2: parent 1:2 limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 516 bytes 7 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc sfq 10: parent 1:10 limit 128p quantum 1514b flows 128/1024 perturb 10...

There is an design problem with the qdisc interface that causes qlen related bugs in netem, tbf, and other qdisc''s that peek at the top of the queue. The problem is that requeue needs to be called from the dequeue function but requeue can fail. If requeue fails, then the calling qdisc can not properly handle the error. If it returns NULL, then the parent''s expectation about qlen gets messed up. Example: prio (qlen = 1) skb = netem dequeue skb = htb deque...

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2 100000Kbit Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 0 class hfsc 1:1 parent 1: sc...

...prio 7 $tcq parent 2:34 sfq limit 50 perturb 1 ------------------------------------------------------------------------------ # tc -s class show dev lan0 class htb 10:1 root rate 100000Kbit ceil 100000Kbit burst 126599b cburst 126599b Sent 68351264 bytes 527234 pkt (dropped 0, overlimits 0 requeues 0) rate 464bit 0pps backlog 0b 0p requeues 0 lended: 0 borrowed: 0 giants: 1924 tokens: 10118 ctokens: 10118 class htb 10:10 parent 10:1 leaf 825b: prio 7 rate 80000Kbit ceil 100000Kbit burst 101599b cburst 126599b Sent 68348547 bytes 527215 pkt (dropped 0, overlimits 0 requeues 0) rat...

...isc add dev imq0 parent 1:99 prio tc filter add dev imq0 parent 1: protocol ip prio 7 u32 match ip dst 192.168.1.99 flowid 1:99 the result is: # tc - s class ls dev imq0 class htb 1:1 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b Sent 2451 bytes 22 pkt (dropped 0, overlimits 0 requeues 0) rate 1016bit 1pps backlog 0b 0p requeues 0 lended: 0 borrowed: 0 giants: 0 tokens: 250000 ctokens: 250000 class htb 1:129 parent 1:1 leaf 816c: prio 0 rate 96000bit ceil 600000bit burst 1599b cburst 1599b Sent 7269 bytes 50 pkt (dropped 0, overlimits 0 requeues 0) rate 1416bit 1pps backlo...

...er: tc filter add dev $eth parent 1:0 protocol arp prio 1 u32 classid 1:1 match u32 0 0 I can immediately see traffic landing in extra bands (arp excluding, which keeps going to the 1st band). In my case, small example: class prio 1:1 parent 1: Sent 35723 bytes 841 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class prio 1:2 parent 1: Sent 3681 bytes 46 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class prio 1:3 parent 1: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class prio 1:4 parent 1: Sent 25814 bytes...

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

...ce I got it working correctly. Thanks, -Ryan Power tc -s -d class show dev eth0 class htb 1:99 parent 1:1 leaf 99: prio 0 quantum 3000 rate 900000Kbit ceil 1000Mbit burst 451350b/8 mpu 0b overhead 0b cburst 501375b/8 mpu 0b overhead 0b level 0 Sent 48695 bytes 398 pkt (dropped 0, overlimits 0 requeues 0) rate 2704bit 2pps backlog 0b 0p requeues 0 lended: 398 borrowed: 0 giants: 0 tokens: 4326 ctokens: 4325 class htb 1:1 root rate 1000Mbit ceil 1000Mbit burst 501375b/8 mpu 0b overhead 0b cburst 501375b/8 mpu 0b overhead 0b level 7 Sent 32821394 bytes 994 pkt (dropped 0, overlimits 0 re...

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0 quantum 1500 rate 80000bit ceil 300000bit burst 1639b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 0 Sent 12243472 bytes 8787 pkt...

...ness, below is the result of my tc and relevant iptables listings after my scripts are run (and with a number of packets sent on my interface): tc -s -d qdisc show dev eth1: qdisc htb 1: r2q 10 default 1 direct_packets_stat 0 ver 3.17 Sent 129462870 bytes 135363 pkt (dropped 46, overlimits 87892 requeues 0) backlog 0b 5p requeues 0 qdisc prio 2: parent 1:1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 129462870 bytes 135363 pkt (dropped 46, overlimits 0 requeues 0) backlog 0b 5p requeues 0 qdisc htb 10: parent 2:1 r2q 10 default 2 direct_packets_stat 0 ver 3.17 Sent 8370 bytes 93 p...

...ter for put packets in one of the HTB classes (30:10) it arrive at the principal HTB class (30) and it sent directly to the interface. It didn''t pass by the htb class but the stream go out of the router. qdisc hfsc 1: default 30 Sent 81396094 bytes 59762 pkt (dropped 23, overlimits 34777 requeues 0) backlog 0b 3p requeues 0 qdisc sfq 10: parent 1:10 limit 128p quantum 1514b perturb 10sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc sfq 20: parent 1:20 limit 128p quantum 1514b perturb 10sec Sent 53186158 bytes 39167 pkt (dropped 0, overlimits 0...

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

If delay scheduler decides not to send the packet right away, it requeues it. If the requeue fails, it should go and look again rather than waking up prematurely. Same patch should apply to both 2.6 and 2.4 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> diff -Nru a/net/sched/sch_delay.c b/net/sched/sch_delay.c --- a/net/sched/sch_delay.c 2004-06-17 15:...