search for: requeued

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Thanks for quick reply Andreas! > Every class is allowed to use bandwidth as long as it does not have to > borrow (the specified rate is guaranteed). Prio in HTB only affects > borrowing bandwidth from other classes... In the example below, the class > 1:5 should be allowed to borrow bandwidth before 1:14 does. Thats exactly what I want from HTB to do..to prio the borrowed bandwidth.

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

There is an design problem with the qdisc interface that causes qlen related bugs in netem, tbf, and other qdisc''s that peek at the top of the queue. The problem is that requeue needs to be called from the dequeue function but requeue can fail. If requeue fails, then the calling qdisc can not properly handle the error. If it returns NULL, then the parent''s expectation about qlen

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

i am trying to do some traffic classification using the PRIO qdisc and i am having a few problems. I have a root htb class: tc qdisc add dev imq0 root handle 1: htb default 255 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 768kbit and a child PRIO tc class add dev imq0 parent 1:1 classid 1:99 htb rate 96kbit ceil 600kbit prio 0 tc qdisc add dev imq0 parent 1:99 prio tc filter

Today I''ve noticed a bit strange (?) behaviour when prio qdisc is used. Example (having no filters/qdisc/etc. at the start) : Add simple 9 bands qdisc, set each mapping to lowest priority band: tc qdisc add dev $eth root handle 1: prio bands 9 priomap 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 If I do just that, all is fine - whole traffic ends in 9th band, what can easily be verified by tc -s

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Eric, I''ve attached the output from the command you requested below. I''m using kernel 2.6.17.12 and tc version ss060323. I''m have a nforce4 onboard giggabit controller using the forcedeth driver, if that makes a difference. Charlie, I''ll take a look at the Apache model for throttling, thanks. I was going for tc because was going to try to add additional

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0

I''m attempting to set up a hierarchy of tc qdiscs with filters, but the filters don''t seem to be working correctly.  I''m running iptables 1.3.5 with iproute 2.6.16.20060323 on a Gentoo 2.6.18 kernel.  The system takes all my tc setup, but does not filter packets as I am expecting it to based on my ruleset. My tc qdiscs and classes are added correctly and report as

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

If delay scheduler decides not to send the packet right away, it requeues it. If the requeue fails, it should go and look again rather than waking up prematurely. Same patch should apply to both 2.6 and 2.4 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> diff -Nru a/net/sched/sch_delay.c b/net/sched/sch_delay.c --- a/net/sched/sch_delay.c 2004-06-17 15:19:07 -07:00 +++