search for: receive

...have Asterisk, the ATA186 and Sipura all hard coded to G711ulaw. When the fax machine trains, I get a stream of errors in the log file. The log is attached below. If you have any suggestions they would be GREATLY appreciated. Thank you!!! Jan 21 16:06:59 NOTICE[10010661]: Unknown RTP codec 60 received Jan 21 16:06:59 NOTICE[10010661]: Unknown RTP codec 60 received Jan 21 16:06:59 NOTICE[10010661]: Unknown RTP codec 56 received Jan 21 16:06:59 NOTICE[10010661]: Unknown RTP codec 94 received Jan 21 16:06:59 NOTICE[10010661]: Unknown RTP codec 60 received Jan 21 16:06:59 NOTICE[10010661]: Unknown...

...doesn't >> matter which _one_ UPS is configured for SNMPv3 in ups.conf, they all >> work individually (see below example). >> >> However, if I configure any two or all three of them to use SNMPv3 then >> on startup upsdrvctl complains about "unhandled ASN 0x81 received from >> .1.3.6.1.4.1.318.1.1.1.9.3.3.1.7.1.1.3" and fails to start. >> > Thanks for the detailed bug report. It's an interesting failure mode. > > I created an issue on GitHub with a link back to the mail archive because the developers who are most involved with SNMP...

...he other two are configured with SNMPv1. It doesn't matter which _one_ UPS is configured for SNMPv3 in ups.conf, they all work individually (see below example). However, if I configure any two or all three of them to use SNMPv3 then on startup upsdrvctl complains about "unhandled ASN 0x81 received from .1.3.6.1.4.1.318.1.1.1.9.3.3.1.7.1.1.3" and fails to start. My current [redacted] ups.conf follows. The only differences between the values are on the port and desc lines (ignoring #, of course). [ups1] desc = "APC Smart-UPS 5000 SNMP in rack 1 - AP9617" driver = snmp...

...10411] logger.c: -- B-channel 0/21 successfully restarted on span 1 Jan 26 11:56:45 VERBOSE[10411] logger.c: -- B-channel 0/22 successfully restarted on span 1 Jan 26 11:56:45 VERBOSE[10411] logger.c: -- B-channel 0/23 successfully restarted on span 1 Jan 26 11:56:46 DEBUG[10442] manager.c: Manager received command 'Command' Jan 26 11:56:46 DEBUG[10442] manager.c: Manager received command 'Command' Jan 26 11:58:46 DEBUG[10442] manager.c: Manager received command 'Command' Jan 26 11:58:46 DEBUG[10442] manager.c: Manager received command 'Command' Jan 26 12:00:46 DEBUG[1...

...t remote machine duplicate the exact same directory, locally. I assume the part of code that creates the file list is same for both local rsync and remote rsync. Here is the output of running with -vvv: opening connection using ssh sundev2 rsync --server --sender -vvvlogDtprC . /home/john/data [receiver] add_rule(:C .cvsignore) [receiver] add_rule(-C ) [receiver] add_rule(- RCS) [global CVS] [receiver] add_rule(- SCCS) [global CVS] [receiver] add_rule(- CVS) [global CVS] [receiver] add_rule(- CVS.adm) [global CVS] [receiver] add_rule(- RCSLOG) [global CVS] [receiver] add_rule(- cvslog.*) [global...

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten => receive,n,Set(GLOBAL(FAXCOUNT)=$[ ${GLOBAL(FAXCOUNT)} + 1 ]) exten => receive,n,Set(FAXCOUNT=${GLO...

Hi all, from much of the documentation I''ve seen, the advice is to set readonly=on on volumes on the receiving side during send/receive operations. Is this still a requirement? I''ve been trying the send/receive while NOT setting the receiver to readonly and haven''t seen any problems even though we''re traversing and ls''ing the dirs within the receiving volume during the send/recv. So, is it OK t...

I did a yum update on my management server and now the ovirt gui is no longer accessable. Is it supposed to just work or do I need to do something after the yum update? Justin.

...l that it requires an X server, and does not provide a command line version. with NUT, I am able to connect to the UPS using the blazer_usb and nutdrv_qx. However, the reported values are constant, and only change if I run the UPSmart tool (It can run in parallel). What can I do to get NUT to receive updated values? I already tried the various subdrivers, and langid_fix , but to no avail. Is there a way to sniff the USB communication of the UPSmart? thanks a lot for your help, Marc here my details: * OS name and version,: ubuntu 14.04.1 64bit * exact NUT version: 2.74 *...

...nected to a FreeBSD 6.2 box and it shows 'data stale' very frequently (every few minutes). I have tried the usual trick of setting maxage, poll interval, etc etc but to no avail. When I wind up logging I see (on mge-shut) entering shut_get_report(id: 0d, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 16, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 17, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 2f, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 20, len: 1800) shut_wait_ack(): ACK received en...

..._get_interrupt() returned 0 instead of 8 while sending 3a 00 ff 0d 00 00 00 00 '........' 9.162442 libusb_get_interrupt: Connection timed out 9.163820 libusb_get_interrupt() returned 0 instead of 8 while sending 3a 00 ff 0d 00 00 00 00 '........' 9.266486 send_cmd: received 00 30 05 58 58 58 58 0d '.0.XXXX.' (OK) 9.267788 Using binary SMART protocol (3005) 9.269255 send_to_all: SETINFO ups.firmware.aux "protocol 3005" 9.270696 send_cmd(msg_len=3, type='W') 9.271796 send_cmd: sending 3a 57 00 a8 0d 00 00 00 '.W......

...e (ftp://ftp.inner.net/pub/opie/opie-2.32.tar.gz) and had it work without a hitch. I'd also changed /bin/login and /bin/su to their opie counterparts. Once I'd finished the upgrade, login and su still worked exactly as before, but attempting to ftp in failed. User gets prompted for name, receives the correct opie prompt, gives the one-time-password, and gets unceremoniously told "Login incorrect." Interestingly, the next time the user tries, the opie sequence *has* decremented by one -- clearly, the user is satisfying the challenge somewhere. (and it doesn't decrement if th...

Hello folks, I have a question and a small problem... I did try to replicate my zfs with all the snaps, so I did run few commands: time zfs send mypool/d at 2006_month_10 | zfs receive mypool2/d at 2006_month_10 real 6h35m12.34s user 0m0.00s sys 29m32.28s zfs send -i mypool/d at 2006_month_10 mypool/d at 2006_month_12 | zfs receive mypool/d at 2006_month_12 real 4h49m27.54s user 0m0.00s sys 13m40.87s zfs send -i mypool/d at 2006_month_12 mypool/d at 2007_mo...

Hello Everyone, Are these indications of attacks on this system? I specifically have port 22 disabled at all times and only port forward it to server when I access SSH for a minute or so. Shouldn't UNKNOWN be an actual IP address? */var/log/secure:* May 14 00:35:39 pbx sshd[9011]: Did not receive identification string from UNKNOWN May 14 00:36:09 pbx sshd[9040]: Did not receive identification string from UNKNOWN May 14 00:36:39 pbx sshd[9075]: Did not receive identification string from UNKNOWN May 14 00:37:10 pbx sshd[9102]: Did not receive identification string from UNKNOWN May 14 00:37:40...

If we change our default subvolume, btrfs receive will fail to find subvolume. To fix this problem, we have three ideas: 1.make btrfs snapshot ioctl support passing source subvolume''s objectid. 2.when we want to using interval subvolume path, we mount it other place that use subvolume 5 as its default subvolume. 3.tell the user to mo...

hi Guys I have now spent hours on this and turn to you in desperation. I am using Actionmailer to fetch emails, but I need to pass a userid to the receive method, so that the receive method knows what user to pass the email to. I tried: (ATTEMPT 1) class PokeMailer < ActionMailer::Base def receive(email,userid) ... end I then invoke the receipt of email with task = PokeMailer.receive(m.pop,userid) But I get the error ''wrong num...

...the samba-client-3.0.14a-2 package supplied with Fedora Core 2. It hangs when listing any directory with over 36 items in it on one particular Windows XP Professional box I'm trying to back up. If I run smbclient -d 3, I get the following output over and over when listing the directory: received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0) received 36 entries (eos=0)...

...immune from all the known security holes posted in bugtraq@netscape.org. Please upgrade or patch your server if you are running any qpopper older than 2.5. Many thanks to all the people who posted these bugs and patches. Thanks Praveen Yaramada. From mail@mail.redhat.com Wed Jul 1 07:18:54 1998 Received: (qmail 28077 invoked from network); 1 Jul 1998 05:22:11 -0000 Received: from 3dyn40.delft.casema.net (HELO rosie.BitWizard.nl) (@195.96.104.40) by mail2.redhat.com with SMTP; 1 Jul 1998 05:22:11 -0000 Received: from cave.BitWizard.nl (cave.BitWizard.nl [130.161.127.248]) by rosie.BitWizard.nl...

https://bugzilla.mindrot.org/show_bug.cgi?id=2130 Bug ID: 2130 Summary: Bugs intended to be fixed in 6.4 Product: Portable OpenSSH Version: -current Hardware: Other OS: Linux Status: NEW Severity: enhancement Priority: P5 Component: Miscellaneous Assignee: unassigned-bugs at

zfs receive should allow option to disable immediately mount of received filesystem. In case of original filesystem have changed mountpoints, it''s hard to make clone fs with send-receive, because received filesystem immediately try to mount to old mountpoint, that locked by sourcr fs. In case of di...