Displaying 20 results from an estimated 46 matches for "rasp".
Did you mean:
asp
2015 Jan 20
3
NUT and relay on USB
Hi there,
I have a question about a raspberry pi as NUT server and a "relay".
I explain my situation: I have an UPS with USB port, so I connect it to
the rasp. The problem is that I have a device manageable only via USB
port.
How can I handle this configuration?
My assumptions are:
1) split the USB cable from UPS to rasp and d...
2010 Jan 13
0
need a clarification on logistic regression
hello
I need a clarification.
in logistic regression, saturated model having all combinations and
interactions of variables should be constructed in this way ? :
> rsat2=glm(cbind(landp,landa) ~
as.factor(rlito)*as.factor(rslp)*as.factor(rasp)*as.factor(rplc)*as.factor(rwi),family=
binomial(link=logit),data=rdf46)
then
using stepAIC to eliminate some models having high AIC values.
> stpAIC_r2=stepAIC(rsat2,list(lower=~1,upper=formula(rsat2)),trace=F)
But obtained final model looks very intricate and I couldn't interpret it....
2015 Jun 03
2
iMAC does not shutdown
Hi everybody!
It has been a journey but I almost manage to make my UPS properly
communicate.
This is the config:
UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
MASTER Raspberry PI-1
SLAVE Raspberry PI-2
SLAVE iMac OSX 10.10.3
I can get access to the UPS from any of the three devices successfully.
Problems:
1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see Rasp-2
Slave going down, Rasp-1 going down, iMac completely ignoring and not
receiving any b...
2015 Jan 20
0
NUT and relay on USB
On Jan 20, 2015, at 4:39 AM, Maurizio <maurizio.iacaruso at gmail.com> wrote:
> Hi there,
> I have a question about a raspberry pi as NUT server and a "relay".
> I explain my situation: I have an UPS with USB port, so I connect it to
> the rasp. The problem is that I have a device manageable only via USB
> port.
> How can I handle this configuration?
> My assumptions are:
> 1) split the US...
2015 Jun 04
2
iMAC does not shutdown
...M, Simone Severini <severini.simone at gmail.com>
> wrote:
>
> Hi everybody!
> It has been a journey but I almost manage to make my UPS properly
> communicate.
>
> This is the config:
>
> UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
> MASTER Raspberry PI-1
> SLAVE Raspberry PI-2
> SLAVE iMac OSX 10.10.3
>
> I can get access to the UPS from any of the three devices successfully.
>
> Problems:
> 1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see
> Rasp-2 Slave going down, Rasp-1 going down, iMac compl...
2015 Jun 05
2
iMAC does not shutdown
...gt;> Hi everybody!
>>>> It has been a journey but I almost manage to make my UPS properly communicate.
>>>>
>>>> This is the config:
>>>>
>>>> UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
>>>> MASTER Raspberry PI-1
>>>> SLAVE Raspberry PI-2
>>>> SLAVE iMac OSX 10.10.3
>>>>
>>>> I can get access to the UPS from any of the three devices successfully.
>>>>
>>>> Problems:
>>>> 1. When I launch /usr/local/ups/sbin/up...
2019 Aug 06
4
Monitor UPS Brand SMS
Hi Users NUT,
I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a
raspberry-pi. In compatibility list, is listed to use the blazer_ser
driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow
the comands e confs.
root at rasp:/home/pi# lsusb
*Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Port*
Bus 001 Device 003: ID 0424:e...
2004 Nov 24
1
Horrible BUZZZZ noise when sounds/music play on SIP phone?
Hi,
I've recently set Asterisk up, 1.0.2 version. With 1 x X100P card and
1 SIP phone.
I've noticed some horrible buzz/rasping type of sounds! These seem to occur when
* is trying to play back some audio or sound to me?
E.g. If I have an exten rule which plays one of the music on hold
files when I dial 800 lets say,
I get a really loud buzz for about 2 seconds and then the music plays.
E.g. 2. If I dial 500 to connect...
2015 Jun 05
0
iMAC does not shutdown
...;severini.simone at gmail.com> wrote:
>
>> Hi everybody!
>> It has been a journey but I almost manage to make my UPS properly communicate.
>>
>> This is the config:
>>
>> UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
>> MASTER Raspberry PI-1
>> SLAVE Raspberry PI-2
>> SLAVE iMac OSX 10.10.3
>>
>> I can get access to the UPS from any of the three devices successfully.
>>
>> Problems:
>> 1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see Rasp-2 Slave going down, R...
2015 Jun 04
0
iMAC does not shutdown
...at 11:45 AM, Simone Severini <severini.simone at gmail.com> wrote:
> Hi everybody!
> It has been a journey but I almost manage to make my UPS properly communicate.
>
> This is the config:
>
> UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
> MASTER Raspberry PI-1
> SLAVE Raspberry PI-2
> SLAVE iMac OSX 10.10.3
>
> I can get access to the UPS from any of the three devices successfully.
>
> Problems:
> 1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see Rasp-2 Slave going down, Rasp-1 going down, iMac compl...
2013 Jun 10
2
several problems with Powercom BNT-500AP
I took the log. Here's what happened.
Broadcast Message from nut at rasp
(somewhere) at 16:18 ...
UPS BNT500AP at localhost battery needs to be replaced
occurred when for the first time value "1" was read as "UPS.PowerSummary.PresentStatus.NeedReplacement", on this line:
6409.240690 Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type:...
2015 Jun 05
0
iMAC does not shutdown
...t gmail.com>
>> wrote:
>>
>> Hi everybody!
>> It has been a journey but I almost manage to make my UPS properly
>> communicate.
>>
>> This is the config:
>>
>> UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver.
>> MASTER Raspberry PI-1
>> SLAVE Raspberry PI-2
>> SLAVE iMac OSX 10.10.3
>>
>> I can get access to the UPS from any of the three devices successfully.
>>
>> Problems:
>> 1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see
>> Rasp-2 Slave going dow...
2015 Jan 20
2
R: NUT and relay on USB
So, just as recap:
I connect USB A (female) to USB B (male) adapter -> HUB -> 2 USB wires male
to male, one to raspberry and another one to my device.
Thanks a lot.
I hope that it works fine :)
Maurizio
-----Messaggio originale-----
Da: Charles Lepple [mailto:clepple at gmail.com]
Inviato: marted? 20 gennaio 2015 13:38
A: Maurizio
Cc: NUT List
Oggetto: Re: [Nut-upsuser] NUT and relay on USB
On Jan 20, 2015...
2013 Jun 11
0
several problems with Powercom BNT-500AP
[I am CC'ing Alexey from Powercom in case he has seen any of these issues with the Raspberry Pi hardware.]
On Jun 10, 2013, at 1:05 PM, M?rti?? Pu??tis wrote:
> I took the log. Here's what happened.
> Broadcast Message from nut at rasp
> (somewhere) at 16:18 ...
> UPS BNT500AP at localhost battery needs to be replaced
>
> occurred when for the first tim...
2015 Jan 03
1
Samba4 Kerberos kinit does not resolve kdc hostname
Hi,
thank you so! much. Turning off avahi daemon was the solution!
rapsberry instead of raspberry is a typo during porivision actually.
Thank you again :)
I will write an entry on my blog to make sure that does not happen again.
One last time for google bots.
IF you receive
kinit: Cannot contact any KDC for realm while getting initial credentials
make sure you don't run avahi
Ho...
2013 Jun 05
2
several problems with Powercom BNT-500AP
OS name and version:
pi at raspberrypi ~ $ cat /etc/*release
PRETTY_NAME="Debian GNU/Linux 7.0 (wheezy)"
uname -a
Linux raspberrypi 3.6.11+ #393 PREEMPT Fri Mar 8 16:36:28 GMT 2013 armv6l
GNU/Linux
exact NUT version
pi at raspberrypi ~ $ dpkg -s nut
Package: nut
...
Version: 2.6.4-2.3
NUT installation...
2015 Jan 13
4
Warning - Raspberry Pi: WPA GUI & tinc crash
tinc 1.0.19 worked fine on Raspberry Pi as long as my Pi was connected via ethernet cable.
Today i changed the connection to wlan. Pi crashed. worse, it was no longer operational, even if connected via cable.
recovery from backup before tinc was installed (yes, i had a backup ;)
tried again. installed tinc: worked as long as c...
2013 Jun 08
0
several problems with Powercom BNT-500AP
On Jun 8, 2013, at 12:57 PM, M?rti?? Pu??tis wrote:
> I'll take a longer driver log. This page (http://www.networkupstools.org/support.html) says that to take a driver log NUT should be stopped, so I won't be able to tell when these events occurred within a driver log.
Hmm, I didn't realize it said that, but I think that's to prevent having two copies of the same driver
2015 Jan 03
2
Samba4 Kerberos kinit does not resolve kdc hostname
Hi,
/etc/resolv.conf looks exactly like this:
domain family.rapsberry.local
search family.rapsberry.local
nameserver 192.168.178.222
So to answer your question: yes the only Nameserver the raspberry has is
itself.
Greetings
Am 2015-01-03 um 7:40 PM schrieb Rowland Penny:
> On 03/01/15 16:31, Robert Hartmann wrote:
>> Hi,
>>
>> i am really depressed at this moment. I set up an domain controller
>> using samba4 and an raspberry pi.
>>
>> I can joi...
2000 Jun 16
3
Argh, preecho mistriggers
...tifacts in the sample are due entirely to Vorbis trying to encode the trumpets entirely in short blocks (which will suck for strongly periodic/harmonic waveforms, as produced by brass instruments).
Just a heads up; if someone else runs across this artifact (it manifests as
'wayyy to much noise/rasp'), you know that I knwo about it.
Monty
--- >8 ----
List archives: http://www.xiph.org/archives/
Ogg project homepage: http://www.xiph.org/ogg/