search for: r4000

I finally got the time to try the new kernel. recompiled it and now the compaq r4000 seems like an amd 64 4000+. THe issues of sloowww ness seemed to have gone away. Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051228/e8f151a7/attachment-0001.html>

Hi I have a compaq R4000 with the 2.4GIG AMD 64 bit. 4000+ rated. proc cpuinfo reports cpu Mhz as 997.481 Do I have to run the 64 bit version to have things run correctly? I just have the normal 4.2 loaded at this time. The laptop seems slow for 4000+ as reflected by the cpu Mhz also. Any thoughts on running the 32 bit...

I am trying to install x86_64 on a compaq r4000 laptop. booting the CD I have tried text mode only and graphicaly mode. I see the normal stuff flying by and I just get a black screen (in text for graphic install). I have tried linux acpi=off apci=off nousb nopcmcia linux noprobe all result in the same black screen. Once the screen goes black...

Anyone tried installing centos 4.2 on an compaq R4000? The CD boots, I hit enter, starts uncompressing the kernel detects my disks (last thing I see) then the screen is BLANK. I tried "linux text" also and exact same thing happens. THanks, Jerry

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ So I thought I would try those same options on my r4000 />/ laptop. they had no effect.... This AMD turion 64 4000+ />/ rating laptop is still running SLOWWW... />/ /proc/cpuinfo has the cpu Mhz running at 2393 / Yes, the 4000+ is 2.4GHz. >/ below is my dmesg output for the r4000. There is a line />/ talking about "Your time source...

Jerry Geis wrote: >/ I finally got the time to try the new kernel. />/ recompiled it and now the compaq r4000 seems like an amd 64 4000+. />/ />/ THe issues of sloowww ness seemed to have gone away. / >Which kernel did you end up with? >Cheers, Chris, The subject line mentioned 2.6.14.5, I downloaded it from kernel.org today. Jerry -------------- next part -------------- An HTML attachme...

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW... /proc/cpuinfo has the cpu Mhz running at 2393 below is my dmesg output for the r4000. There is a line talking about "Your time source seems to be instable or some driver is hogging interupts&quot...

On 01/14/2016 04:47 PM, Paul E. McKenney wrote: > On Thu, Jan 14, 2016 at 03:33:40PM -0800, Leonid Yegoshin wrote: >> Don't be fooled here by words "ordered" and "completed" - it is HW >> design items and actually written poorly. >> Just assume that SYNC_MB is absolutely the same as SYNC for any CPU >> and coherent device (besides performance).

On 01/14/2016 04:47 PM, Paul E. McKenney wrote: > On Thu, Jan 14, 2016 at 03:33:40PM -0800, Leonid Yegoshin wrote: >> Don't be fooled here by words "ordered" and "completed" - it is HW >> design items and actually written poorly. >> Just assume that SYNC_MB is absolutely the same as SYNC for any CPU >> and coherent device (besides performance).

...ave:[0] drivers in environment [Windows NT x86] and version [1] we have:[0] drivers in environment [Windows NT x86] and version [2] we have:[77] drivers in environment [Windows NT x86] and version [3] [ collection of 77 printerdrivers listed ] we have:[0] drivers in environment [Windows NT R4000] and version [0] we have:[0] drivers in environment [Windows NT R4000] and version [1] we have:[0] drivers in environment [Windows NT R4000] and version [2] we have:[0] drivers in environment [Windows NT R4000] and version [3] we have:[0] drivers in environment [Windows NT Alpha_AXP] an...

Gents, I first installed the 32 bit version (as you might have read) of centos 4.2, after downloading x86_64 the install process/progress is about the same. going VERY slow... The screen for formatting the partitions took a LONG time (3 partitions 10 GIG, 2 GIG swap and 50 GIG). While on that screen and moving the mouse it lagged big time and could not keep up. Anyway just reporting that so far

...no lightweight SYNC or no SYNC at all - yes, it is still possible that SYNC on >> some systems can be too heavy or even harmful, nobody tested that. > I don't recall being asked; In http://patchwork.linux-mips.org/patch/10505/ the very last mesg exchange is: Maciej, do you have an R4000 / R4600 / R5000 / R7000 / SiByte system at hand to test this? ... Ralf Maciej W. Rozycki <http://patchwork.linux-mips.org/project/linux-mips/list/?submitter=79> - June 5, 2015, 9:18 p.m. On Fri, 5 Jun 2015, Ralf Baechle wrote: > do you have an R4000 / R4600 / R5000 / R7000 / SiByte...

...http://lkml.iu.edu/hypermail/linux/kernel/1601.3/03080.html>. > There's a reference to an older message of mine there too. I hope this > answers your questions. > > Maciej In http://patchwork.linux-mips.org/patch/10505/the very last mesg exchange is: Maciej, do you have an R4000 / R4600 / R5000 / R7000 / SiByte system at hand to test this? ... Ralf Maciej W. Rozycki- June 5, 2015, 9:18 p.m. On Fri, 5 Jun 2015, Ralf Baechle wrote: > do you have an R4000 / R4600 / R5000 / R7000 / SiByte system at hand to > test this? I should be able to check R4400 (that is vi...

...an error: rpcclient $> deldriver "AGFA-AccuSet v52.3" Failed to remove driver AGFA-AccuSet v52.3 for arch [Windows 4.0] - error 0x705! Failed to remove driver AGFA-AccuSet v52.3 for arch [Windows NT x86] - error 0x705! Failed to remove driver AGFA-AccuSet v52.3 for arch [Windows NT R4000] - error 0x705! Failed to remove driver AGFA-AccuSet v52.3 for arch [Windows NT Alpha_AXP] - error 0x705! Failed to remove driver AGFA-AccuSet v52.3 for arch [Windows NT PowerPC] - error 0x705! result was NT_STATUS_UNSUCCESSFUL rpcclient $> The driver file's have themselves been removed...

Chris, I have a compaq AMD r4000 x86_64. grabbing the latest kernel and compiling it fixed my clock skew. I have not had any slow disk issues. again the kernel may help doing the command: killall -SIGUSR1 cpuspeed makes the CPU run faster. Hope that helps. Jerry -------------- next part -------------- An HTML attachment was s...

Is there a location for centos 4.2 that has a current kernel compiled and ready to just install for the 2.6.14.X kernel? I am wondering if a current kernel helps with my slowww compaq r4000 amd64 machine. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051226/dd21bbc1/attachment-0001.html>

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

On Thu, Jan 14, 2016 at 04:47:53PM -0800, Paul E. McKenney wrote: > So you need to build a different kernel for some types of MIPS systems? Yes. We can't really do without. Classic MIPS code is not relocatable without the complexity of PIC code as used by ELF DSOs - and their performanc penalty. Plus we have a number of architecture revisions ovr the decades, big and little endian, 32

On Thu, Jan 14, 2016 at 04:47:53PM -0800, Paul E. McKenney wrote: > So you need to build a different kernel for some types of MIPS systems? Yes. We can't really do without. Classic MIPS code is not relocatable without the complexity of PIC code as used by ELF DSOs - and their performanc penalty. Plus we have a number of architecture revisions ovr the decades, big and little endian, 32

...'m trying to use rpcclient to add a driver to a Samba 3.0.25 running on Gentoo. When I run the script below, rpcclient prints out the same message as if "--help" was submitted as the only switch. #!/bin/bash -x RPC="/usr/local/samba/bin/rpcclient" ARCH='Windows NT R4000' #ARCH='Windows NT x86' DRIVER='HP LaserJet 4Si/4Si MX PS:pscript.dll:hp4si_v4.ppd:pscriptui.dll:pscript.hlp:NULL:raw:NULL' SYSTEM=scooby $RPC -U markg -c adddriver "$ARCH" "$DRIVER" $SYSTEM The correct files are copied to: /var/lib/samba/printers/W32M...