search for: r1t1

Hi all, We have just set up trixbox latest with a Rhino r1t1 card, hooked up to a plain E1 PRI line. We call fine SIP to SIP, but as soon as we make a call from SIP to PSTN all sounds become unintelligible screeching or static kind of noise on both ends, when we call PSTN to SIP the PSTN side seemingly OK at least we hear no screeching sound, but the SIP...

I have been looking at the rhino r1t1, and digium single t1, and the sangoma, but from what i read they all sound like good products. Anyone have anything bad about any one of them? I am leaning towards the sangoma as it seems to have a better following here on the lists. Any advice is appreciated.Thanks -------------- next part ------...

This adds the mdadm-create API for creating RAID devices, and includes various fixes for the other two patches. Rich.

Hi, A most peculiar and vexing problem for you all. I hope I have been verbose enough without being a firehose ;) The set up: I have a channel bank, using the r1t1 rhino driver with a rhino T1 card (the channel bank itself is a very legacy piece of equipment)- this supplies FXS for all the house phones. Also, a Wildcard TDM400P, using the wctdm module with 1 FXO module, this supplies FXO to the upstream telco (a single line). The problem: Lately, and without...

...0 which had timing problems from day 1 ) so I upgraded a little ( the Zhone - more expensive and not super, but at least it has firmware and a console for mgmt ). This has had some effect, but nothing has changed about the fundamental problem (1 above). Other hardware: the T1 interface card is the R1T1 from rhino, there is a Wildcard TDM400P REV I, with a single FXO port for the incoming line from the POTS. The computer itself seems quite fine, no sign of interrupt errors or other problems with the hardware (I ran a memtest and a cpuburn neither of which showed any issues). zttest shows nothing u...

....4.6 (trixbox RPM) zaptel 1.4.11-1 (trixbox RPM) zaptel-modules 1.4.11-1.2.6.18_53.1.4.el5 (trixbox RPM) Hardware ======== Rhino Ceros III (2U short-depth server) - Intel Desktop Board DG33FB - Intel Pentium D 2.2Ghz (E2200) - 1GB RAM - 80GB SATA HostRAID Mirror (RAID1) - Rhino R1T1-EC Single T1 card (as PRI, using 4 channels + D) - Rhino RCB8FXX/1 w 1 FXO Module (2 FXO ports total) Zaptel ======== The cards we are using are mentioned above. Other than that, if it helps, here's what we're doing with our trunks. We are using 4 channels of the PRI (channels 1-4), pl...

...# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -# Test guestfish mdadm-create command. +# Test guestfish md-create and md-detail commands. set -e @@ -53,16 +53,16 @@ part-add /dev/sdd p 12288 16383 part-add /dev/sdd p 16384 20479 # RAID 1. -mdadm-create r1t1 "/dev/sda1 /dev/sdb1" -mdadm-create r1t2 "/dev/sdc1 /dev/sdd1" chunk:65536 +md-create r1t1 "/dev/sda1 /dev/sdb1" +md-create r1t2 "/dev/sdc1 /dev/sdd1" chunk:65536 # RAID 5. -mdadm-create r5t1 "/dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2" \ +md-create...

Hey guys! I'm the past week and a half, I have really learned a lot from the mailing list and the wiki's posted online. Now I have a question regarding different ways I can setup my asterisk server for a small business with 12 extensions in the office. Cost is a great concern, so I know cheap analog phones at the desks is what we are looking at. My question is, should I go do a fractional

...FXO port to connect asterisk to the PSTN. "lsmod | grep dahdi" command: dahdi_echocan_oslec    12682  1 echo                   13621  1 dahdi_echocan_oslec dahdi_transcode        14291  1 wctc4xxp dahdi_voicebus         59241  2 wctdm24xxp,wcte12xp dahdi                 228088  19 xpp,r1t1,rxt1,wctdm24xxp,rcbfx,wcaxx,wcfxo,wctdm,dahdi_transcode,dahdi_echocan_oslec,oct612x,dahdi_voicebus,wcb4xxp,wct1xxp,wct4xxp,wcte43x,wcte11xp,wcte12xp,wcte13xp crc_ccitt              12707  2 wctdm24xxp,dahdi "dahdi_hardware" command: pci:0000:06:01.0     wctdm+       e159:0001 Wildcard TD...

Hello! I have been struggling with Asterisk 1.6 and DAHDI for the past few weeks. We are an outgoing call center with 30 internal analog phones hooked up to 2 Rhino CB24 channel banks. The banks are connected to a Rhino R4T1 card in a Dell 2950 server with 8 gigs of RAM. The 2 other ports on the R4T1 go to our 2 PRIs. In this configuration, we have trouble maintaining stability. It may be fine

Return a hash containing metadata about a specific Linux MD device, based on the output of 'mdadm -DY'. --- daemon/md.c | 78 ++++++++++++++++++++++++++++++++++++++++ generator/generator_actions.ml | 31 ++++++++++++++++ regressions/test-mdadm.sh | 60 ++++++++++++++++++++++++++++++- src/MAX_PROC_NR | 2 +- 4 files changed, 169

...ems from day 1 ) so I upgraded a little ( the > Zhone - more expensive and not super, but at least it has firmware and a > console for mgmt ). This has had some effect, but nothing has changed > about the fundamental problem (1 above). > > Other hardware: the T1 interface card is the R1T1 from rhino, there is a > Wildcard TDM400P REV I, with a single FXO port for the incoming line > from the POTS. The computer itself seems quite fine, no sign of > interrupt errors or other problems with the hardware (I ran a memtest > and a cpuburn neither of which showed any issues). zt...