search for: r1000

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* ment...

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page title...

Bill, your CentOS 5 RTL8110 page should probably be updated. I've confirmed that there's a newer r8169 driver in the kernel that works with the RTL8110. RealTek's web site now carries the new r8169 instead of the r1000. The newer driver fixed a problem I was having on one host so we should probably recommend it over the older r1000. I've updated my CentOS 4 page. Kirk Bocek http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/HardwareList/RealTekr1000

...he RISCV backend record dump. There will be a substitution at some point for $rd. In the second, I'm specifying R2, no substitution necessary. If I specify GPR64:R2 or i64:R2 in my Instruction def, rather than just R2, tblgen complains: error: expected variable name in dag literal If I use R1000 (which isn't defined) I get what I'd expect: error: Variable not defined: 'R1000' There isn't any documentation (that I could find) for this syntax. Consequently, I'm a little worried that using R2 rather than something:R2 is somehow wrong. Why does the RISCV dag use GP...

...hen I get what I would consider normal network access to the xen machine. Hardware: Gigabyte GA-G33M-S2H MB (Realtek R8110SC onboard nic) OS: CentOS 5.1 64bit Xen I installed CentOS last night with the Xen kernel, the stock kernel did not support my nic which I was aware of. So I downloaded the r1000 source rpm from the centos wiki, built and installed it. Once I did that the card was detected (an ifconfig would actually display eth0), but it would never get an IP address (the xen machine is configured for dhcp at the moment). Today, I installed the non-xen kernel, applied the non-xen r1000...

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people first. The gritty details: Last night I attempted to install 5.2 x86_64 on a new Gigabyte GA-G31M-S2L. This motherboard has a...

...t does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go under the radar unnoticed) I ripped the r1000 rpm from rpmforge and created a dkms based rpm for the r8168 driver. Since others might find a use for it too, I have uploaded the rpm (and it's corresponding source) at http://wolfy.fedorapeople.org/dkms-r8168/. I am also thinking of linking to it from the above mentioned wiki page. Wh...

...hen I get what I would consider normal network access to the xen machine. Hardware: Gigabyte GA-G33M-S2H MB (Realtek R8110SC onboard nic) OS: CentOS 5.1 64bit Xen I installed CentOS last night with the Xen kernel, the stock kernel did not support my nic which I was aware of. So I downloaded the r1000 source rpm from the centos wiki, built and installed it. Once I did that the card was detected (an ifconfig would actually display eth0), but it would never get an IP address (the xen machine is configured for dhcp at the moment). Today, I installed the non-xen kernel, applied the non-xen r1000...

...xen kernel. Is this a problem - and if so - how do I stop it from running? How do dnsmasq and dhcpd both function without breaking each other? Now some detailed background: The machine uses a Realtek 8111B network adaptor - and this has been a problem all along. I used to manually reinstall the r1000 driver (apparently the correct driver for the adaptor) every time the kernel was updated. Tedious - but it worked. My xen kernel worked fine. Some months back - a bunch of updates came through corresponding to the release of Centos 5.1 - and my normal driver re-install didn't seem to get t...

Is there anyway to force an autopickup on a cisco 7940 / 60 from the dialplan ? My problem is that I am originating a call from the AMI, with the internal user being called first, and then connecting to external user. However, sometimes the internal user doesn't pick up the phone, so the call is never placed. I need to know the results of the call so I need to be able to either a) get

...o do this automagically when a new kernel is installed. Perhaps my google-foo is off today, or I have not exercised sufficient diligence to RTFM, but can't seem to find the recipe. Meanwhile, back at the ranch... Wanted to try the dkms approach and the spec file below (based on RPMforge dkms-r1000.spec) worked for me. Installing the resulting RPM created /lib/modules/2.6.18-8.1.8.el5/extra/arcmsr.ko, made a soft link to it as /lib/modules/2.6.18-8.el5/weak-updates/arcmsr.ko, and removed /lib/modules/2.6.18-8.1.8.el5/weak-updates/arcmsr.ko Should probably have figured out how to use the or...

Hello, I am building a DRBD cluster with CentOS 4.4. Both nodes have RTL8169S-32 cards, Pheenet branded. I'm getting no more than 185 Mbps with the driver selected at installation (r8169). Downloading Realtek's r1000 climbs to some amazing 200Mbps. I am measuring performance with iperf, host to host, with a cat5e direct cable some 2.5ft long. Maybe disk I/O will be the bottleneck in my use case but anyway I feel performance is well under par with this cards. Is something wrong in my measuring setup? Am I right...

...single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also give write access to BillScheel since he's the author of the related CentOS 5 Realtek r1000 page? Thanks, Wiki Account kirkbocek

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

This is undoubtedly an upstream issue, but ... I've been messing about with that hp pavilion trying to get wireless working. If I boot with the eth0 NIC plugged in, everything is blazingly fast -- GDM comes up in a few seconds, the Gnome startup splash screen barely has time to appear before it's gone again, shells pop up the instant I click Open Terminal. If I unplug the network and

Hi, I am trying to install centos on the intel D945GCLF board. It's a mini-ITX board with the atom processor and it uses the Realtek RTL8102EL LAN chipset. When I disable the on-board LAN card it installs and runs OK, but when I enable it, I get kernel panic at boot. The board runs perfectlj with Fedora 9 (with the latest kernel) or with Ubuntu server. My question is: is there some way

...; Message-ID: <em5rmr$q6c$1 at sea.gmane.org> > Content-Type: text/plain; charset=ISO-8859-15; format=flowed > > Shawn wrote: >> Do you happen to know the driver for your nic card. >> I've tried rt8111 and 8139too (different card) under fc6 without luck. > > The r1000 driver from realtek: > http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2 > >> I wanted centos originally actually but didn't think the jmicron would >> work and need to pull data o...