search for: pw9125

...ituation: Powerware 9125 serially connected using /dev/cua0 nut compiled and installed fine system shall - broadcast a message and shut down if ups on battery for 30+ s - wait 120 s - broadcast another message - give system 120 s to shut down, then power off bcmxcp is running as /usr/bin/bcmxcp -a PW9125 with ups.conf [PW9125] driver = bcmxcp port = /dev/cua0 shutdown_delay = 120 desc = "tfp-8" upsd and upsmon are running, too upssched is used and works fine, e.g. AT ONBATT * START-TIMER a-onbat 30 AT ONBATT * START-TIMER a-onbat2 120 do alright Problem: When shutti...

...d didn't see a driver for it: > > http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton > > I see a driver for the 9130; any idea whether it will work with a 9125? > > Any other ideas for connecting the 9125 to a FreeNAS server? It's probably similar to the PW9125: http://www.networkupstools.org/stable-hcl.html?manufacturer=Powerware Just serial, or does it have other options? If you have the original manual or software that came with the UPS, do they say anything about the name of the protocol? The BCM/XCP protocol is pretty well documented, and supporte...

I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. I looked a the list and didn't see a driver for it: http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton I see a driver for the 9130; any idea whether it will work with a 9125? Any other ideas for connecting the 9125 to a FreeNAS

Hello! It looks like bcmxcp driver doesn't fit my device: UPS Model ? ? ? ? ? ? ? ? ? ?PW9125 UPS Firmware Version ? ?FP: 1.10 INV: 1.10 VA Rating ? ? ? ? ? ? ? ? ? ? ?3000 VA Web/SNMP card is present. Minicom connection to /dev/ttyS0 gives nice banner and control menu, but they prevent nut driver from working correctly (I guess). UPS should be switched into "Pass-Through" mode...

Hello! It looks like bcmxcp driver doesn't fit my device: UPS Model ? ? ? ? ? ? ? ? ? ?PW9125 UPS Firmware Version ? ?FP: 1.10 INV: 1.10 VA Rating ? ? ? ? ? ? ? ? ? ? ?3000 VA Web/SNMP card is present. Minicom connection to /dev/ttyS0 gives nice banner and control menu, but they prevent nut driver from working correctly (I guess). UPS should be switched into "Pass-Through" mode...

...S re-established Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools (version 2.0.2) - APC Smart protocol driver Driver version 1.99.7, command table version 2.0 Detected SMART-UPS 2200 [GS9850005011] on /dev/cuaa5 Network UPS Tools - BCMXCP UPS driver 0.08 (2.0.2) Modell = PW9125 1000i 1000VA Firmware = 11.00 Shutdown delay = 120 seconds Network UPS Tools upsd 2.0.2 Connected to UPS [UPS-1]: apcsmart-cuaa5 Connected to UPS [UPS-2]: bcmxcp-cuaa4 Synchronizing...done Network UPS Tools upsmon 2.0.2 UPS: UPS-1@localhost (master) (power value 1) Using power down flag file /e...

Thanks to Olli, I can now talk to my PW9125 via SNMP: > upsc cscfups001@localhost ambient.temperature: 031.0 battery.charge: 090.0 battery.runtime: 2640.0 battery.voltage: 055.5 driver.name: snmp-ups driver.parameter.mibs: pw driver.parameter.port: cscfups001.cs.uwaterloo.ca driver.version: 2.1.0 driver.version.internal: 0.41 input.freq...