search for: pulsars

Hello! We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups. - my ups.conf: [extreme] driver = usbhid-ups port = auto product = "EXtreme" [pulsar] driver = usbhid-ups port =

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hello, I'm trying to communicate with a MGE Pulsar STS 16 using nut under Linux, but I've had no luck so far. I haven't saw it supported in the doc, so if there's anything I can try... Thanks, Arnaud. -- Perso: http://launay.org/blog/ H?bergement: http://www.nocworld.com/

(Sorry, I accidentally discarded the wrong message in the moderation queue - please subscribe to the list to avoid this in the future.) > From: <onyx at netfusion.fr> > Subject: [HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver > Date: December 22, 2011 12:15:16 AM EST > To: <nut-upsuser at lists.alioth.debian.org> > > > Hi everybody, > > It

On 26/04/16 10:07 PM, John R Pierce wrote: > On 4/26/2016 6:45 PM, Jack Bailey wrote: >> >> Today someone in a meeting claimed the Bourne shell is deprecated, one >> of the reasons being it supposedly has security issues. Well that's >> all news to me, and I cannot find anything online to corroborate the >> claim. Is this true, is it a bash vs. Bourne FUD, or

Hello, My MGE Pulsar Evolution 800 had some hardware troubles (it may be the batteries according to the manual). The fault was not detected so the power was cut to the load and nothing appears in the log files. Arnaud: do you know if the UPS have some way to report this kind of troubles to the PC so that NUT can handle it with a shutdown sequence ? Philippe

Hi, I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT. I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. The UPS is connected via RS232 and upsc output

We have several systems in remote locations and I have found that the ones in the US are having issues.. We are an Australian company and can't source a 110V UPS locally so we arrange to have one bought for the site when it's installed. It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we buy "Pulsar 1500". NUT seems to work find with the

Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'

I have an MGE Pulsar Evolution 1100 connected to a Debian box, with nut-2.0.1 (the standard "sarge" packages). I have it connected through USB, and I'm using newhidups. However, about once a day the driver looses contact with the UPS and I have to restart NUT to get it to drop the "data stale" nonsense (it happens more often than this, but most times it recovers without

I'm struggling to configuring nut for MGE Pulsar Ellipse 800 (at least Ellipse 800) for two boxes - home firewall and file server. I'm using Debian 4.0 Etch, every one of them. I'm built (after some dangerouse experiments) a testing configuration, where boxes are plugged to line, server playing as a master, firewall as a slave, and UPS connected to an electric heater about 300 Wats (no

Hi, My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port, usbhid-ups driver. Using simply KNotify about UPS connection states I noticed that sometimes unpredictably a notification appears that the USB connection to the UPS is lost and a few seconds later another notification appears that the connection is restored. And this repeats to infinity. The only way to get out of it is to

FYI, Seagate has announced a new enterprise SSD. The specs appear to be competitive: + 2.5" form factor + 5 year warranty + power loss protection + 0.44% annual failure rate (AFR) (2M hours MTBF, IMHO too low :-) + UER 1e-16 (new), 1e-15 (5 years) + 30,000/25,000 4 KB read IOPS (peak/aligned zero offset) + 30,000/10,500 4 KB write IOPS (peak/aligned zero offset)

Hi all, Have been using Nut on Linux for over ten years now and find it brilliant. Thanks. Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use (apcsmart, megatec, mge-shut, surgemax, digitus) all working including the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups driver. Running on SLES9. Old but we still have a few servers out there running

Hi, I've been using NUT for many years to look after the UPS on my home servers. Originally I was using a Compaq R3000 but that was replaced with an MGE Pulsar Evolution 3000 about a couple of years ago because the Compaq one was just too noisy! I'm just setting up a replacement server and would like to connect it using a serial cable as I've found that the USB connection

Hi all, Not sure if this is on topic or not. I'm trying to query an SNMP value from centos 6 and I get a bad response if I don't specify the MIB to use: 0 digimer at pulsar:~/anvil/striker$ snmpget -v2c -c public -m /home/digimer/Downloads/APC/AP7900/MIB/powernet421.mib 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 RFC1213-MIB::ifPhysAddress.2 = Hex-STRING: 00 C0 B7 5F 8A 85 0 digimer at

Hi, Apologies if this is a known problem. I have just joined the list and haven't done an exhaustive search of the archives. Also I am no UPS expert, so please excuse me if some of my terminology is poor. I use an MGE Pulsar Extreme 700C connected via RS232 to the linux server it powers. I have recently upgraded to a new linux distribution. Both new and old use 2.6 kernels, although

I suspect that the battery is failing on my Pulsar Evolution 500 (it is several years old now) but I can't seem to get a valid battery voltage from the UPS. The following tests were done using NUT 2.2.1, but I first noticed this with the trunk, and reproduced it with the current branches/Testing as well. The only two values I have seen for battery.voltage are 120.0 and 119.0, e.g.: $ upsc

I am running NUT 2.2.0 compiled from the FreeBSD ports tree. [inchoate 14:50] ~ >upsc ups1 at localhost battery.charge: 59 battery.charge.low: 20 battery.charge.restart: 0 battery.runtime: 6350 battery.type: PbAc battery.voltage: 43.0 driver.name: usbhid-ups driver.parameter.offdelay: 120 driver.parameter.ondelay: 13 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: